Give Feedback
0 of 0
About this mod
A player home on top of the Mass Fusion building which can be installed with Transfer Settlements or Clipboard Resurrection.
- Requirements
- Permissions and credits
This two-story penthouse sits on top of the Mass Fusion building in the center of Boston. It can be accessed through an elevator on the top level of Mass Fusion, with stops on both levels of the penthouse as well as roof gardens above and below. It has a large open living and dining room, 2 bedrooms with bathrooms, a separate kitchen, guest bathroom, office, swimming pool and a spare room. There are 29 usable switches to control lights and window shutters.
Required DLCs:
Required mods:
Note that these are direct requirements only. Some of them have additional requirements of their own that need to be installed as well.
Some decoration objects were placed with my mod Vanilla Objects. It is not required for importing.
Installation:
Using a different settlement with Transfer Settlements / in case of "wrong worldspace" errors:
Required DLCs:
- DLC: Contraptions Workshop
- DLC: Vault-Tec Workshop
Required mods:
- Conquest or Settle Everywhere or some other way to create a settlement at the location
- Clipboard Resurrection or Transfer Settlements
- Snappy HouseKit
- Settlement Objects Expansion Pack
- Homemaker - Expanded Settlements
- Whisper's Institute Build Kit
- Masterwork Architecture Project
- KaresansuiWorkshop
- CatDeco Floors and More
- Wired Settlement Lights Revived
- Invisible Light (recommended for good lighting)
- Craftable Vault Elevator for DLC
- MadKea - 500 Workshop items
- Auto Doors (version 2.9a or higher)
- HZY-furniture and decoration
- Renovated Furniture
- More Colorful Compilation: Plants and decoration
- Mixed Landscapes: Paintings
- V Furniture: Furniture and decoration
- V's Stylish Decor
- CREAtive Clutter (version 22 or higher): Furniture and decoration
- Do It Yourshelf Updated: Furniture
Note that these are direct requirements only. Some of them have additional requirements of their own that need to be installed as well.
Some decoration objects were placed with my mod Vanilla Objects. It is not required for importing.
Installation:
- Install with a mod manager.
- I recommend saving after each of the following steps. The game is prone to crashing after a large building import. The first save directly after importing can take a long time even on a very fast PC.
- Fast-travel to Mass Fusion and then paste this line into the console to go to the right location:
player.setpos x 19036; player.setpos y -7101; player.setpos z 9000; player.setangle z 180 - Build a settlement (with Conquest or another mod) at this location. The Transfer Settlements blueprint is designed for the Caldeira Outpost of Conquest. See below for using a different settlement. The Clipboard pattern should work with any settlement without modification.
- When using Clipboard Resurrection (preferred because it's much faster and doesn't require a specific settlement): Build the clipboard tool, choose "Move To Pattern Source Location" in the action menu first, then "Paste From Clipboard". Ignore the warning about the missing settlement.
- Alternatively, when using Transfer Settlements: Use the holotape to import the blueprint. Make sure "Import or nuke marker-based items" is selected. Note that I only test with the "Stable" preset. Use anything else at your own risk. If you get a "wrong worldspace" error, follow the instructions below for using a different settlement.
- Some wireless lights may attach to a switch instead of the main power when powering up. If you notice any light going out when you close a window shutter, pick the light up an in workshop mode and release it again. This should switch it to the right power source.
Using a different settlement with Transfer Settlements / in case of "wrong worldspace" errors:
- After creating the new settlement at the right location, build some object in it (because exports can't be empty), export it with Transfer Settlements and exit Fallout 4.
- Open the bp.json file from this mod in a text editor and look for the "workshop" section at the very end.
- Replace it with the "workshop" section from your exported settlement. Now you should be able to import the modified blueprint.