Amanda won't follow me anymore. She originally got stuck in the Tarpit, but I teleported her out. I ask her to join me and she agrees, but she won't move. I noticed if I ask her to do something and move around while in that mode, she begins following me. Not sure how to get her to follow me normally.
I went to the fortress in the Dark Valley and now she won't follow me anymore :( I tried to "moveto player" her but nope, she just stares at me and won't follow. She does respond to commands like "go there" or "carry my stuff", but she just won't follow me around.
I'm guessing Nav meshing. Enderal wasn't designed for adding followers. They have their own system for doing things. Its going to get to a point, that followers might just get stuck.
Hey, I know that it may be a bit late. But there's a mod in Beta currently, which, as far as I understand it, aims to improve the Nav Meshing to allow Followers to, well ... follow you. I haven't tried it myself yet but maybe this'll help you. :) "Enderal Navmesh Complete (Beta)?".
Search for Libfire and Stay With Me! mods. LibFire is a plugin that extends Papyrus functions. Mods used to be on Nexus but Author removed them and is hosting it on his/her site. I am not sure if i am allowed to share here. Stay With Me allows followers to teleport to you and it's very compatible.
Hey, (I rarley post comments so I hope this is not awkward) First, I just wanted to say thank you very much for your mod. :) Everything worked great and, while she's a basic follower (and I didn't expect more), it's nice to have someone around and not just lone-wolf everything.
If anyone is having trouble with her not equipping custom outfits or if NFF throws a fit that's how I got it working (I hope this can help someone):
- I installed NFF before installing Amanda herself and made sure MCM picked it up (which took a couple minutes for me.) - Regarding outfits: ?-> Optional(?): As I wanted (and succeeded) to hand her a custom armor (the CBBE Version of DX Dark Knight to be exact) I needed to make ?sure first that the armor(s)/outfit(s) were build correctly by OutfitStudio. (for the body you like. Though I do not know how important this step is ?as I don't know if she uses a custom body or not. This step requires that you use CBBE and OutfitStudio of course.)
?-> Then, (if you use custom armors/outfits) you need to run the ArmorAddon Patcher by MongoMonk you can find here. ?(Just install with a Mod Manager you like and run the EnderalAAPatcher.jar included. Then run Enderal's launcher and put the newly created ?Enderal_AA_Patcher.esp at the end of your loadorder. Repeat this process when you add or remove any armor/outfit mods.)
?This should be it. She should sit at the bar in the drunken bee ready to follow you wherever you go. I hope this helps someone having trouble. :)
I have an issue changing her outfit. Tried general dialog, NFF and console - in all cases outfits are invisible, while are okay on my char. Any1 knows the reason?
PS. Well, I guess I got the reason. Outfits, created for SSE, do not support her race. Thus one need to use xEdit to add the support (just copy races from Enderal outfit, technically). It took me around 20 hours of digging to get it working.
PSS. Using NPC visual transfer tool and using this mod, you could create any number of followers, actually. I won't make a full description, as I am too lazy, but will describe main steps. It will be enough for familiar users. You could skip steps 1-5 if you only want to edit Amanda itself
1) Rename Amanda.esp to any one you wish (Liya, for example) 2) Go to EnderalEdit and recreate seq file, as well as rename follower to any name under actor 3) I do suggest to remove default outfit record 4) Unpack BSA, rename Amanda.esp folders to Liya.esp (example) and add newly generated seq file 5) Pack BSA back and replace original one Now you have a follower with the very same look/skills/scripts - everything, but it is not Amanda anymore. This way you could create any number of them.
6) Using NPC visual transfer tool (you will need to use SSEEdit for this) create a esp, transfering the visuals from any other skyrim SE follower (I still do suggest not to transfer outfit). Please note that SSEEdit uses plugins.txt from SSE folder, so to manage load order you will need to add esp names to your SSE plugins.txt file. NPCVT esp MUST be under all followers esp you are trying to edit - sticky post under mod page of NPCVT is incorrect about it (vortex users) 7) In the esp created, make sure the race of the actor is the same as original Liya (example), replace if needed 8) For all default body (naked hands/feets/body) armor addons make sure the supported races are the same as original Liya (example) armor addons 9) If you need SE outfit, make sure to remove all DLC references and add support for all Enderal races in its esp.
47 comments
Enderal really needs more Followers! :-)
Took me a little bit to find it so I'll post it there in case it helps someone.
I can't fathom from a design stand point why anyone would want to yank the follower system entirely out of Skyrim like they did. Yikes.
Thank you for Amanda!
You can try below mods in Enderal SE, but your mileage may wary:
CS Tag N Track SE at Skyrim Special Edition Nexus
EFF - Extensible Follower Framework at Skyrim Special Edition Nexus
Decided to go the route of using the mod that keeps summons active until they die.
I know that it may be a bit late. But there's a mod in Beta currently, which, as far as I understand it, aims to improve the Nav Meshing to allow Followers to, well ... follow you.
I haven't tried it myself yet but maybe this'll help you. :)
"Enderal Navmesh Complete (Beta)?".
(I rarley post comments so I hope this is not awkward)
First, I just wanted to say thank you very much for your mod. :)
Everything worked great and, while she's a basic follower (and I didn't expect more), it's nice to have someone around and not just lone-wolf everything.
If anyone is having trouble with her not equipping custom outfits or if NFF throws a fit that's how I got it working (I hope this can help someone):
- I installed NFF before installing Amanda herself and made sure MCM picked it up (which took a couple minutes for me.)
- Regarding outfits:
?-> Optional(?): As I wanted (and succeeded) to hand her a custom armor (the CBBE Version of DX Dark Knight to be exact) I needed to make ?sure first that the armor(s)/outfit(s) were build correctly by OutfitStudio. (for the body you like. Though I do not know how important this step is ?as I don't know if she uses a custom body or not. This step requires that you use CBBE and OutfitStudio of course.)
?-> Then, (if you use custom armors/outfits) you need to run the ArmorAddon Patcher by MongoMonk you can find here.
?(Just install with a Mod Manager you like and run the EnderalAAPatcher.jar included. Then run Enderal's launcher and put the newly created
?Enderal_AA_Patcher.esp at the end of your loadorder. Repeat this process when you add or remove any armor/outfit mods.)
?This should be it. She should sit at the bar in the drunken bee ready to follow you wherever you go. I hope this helps someone having trouble. :)
Cheers!
PS.
Well, I guess I got the reason. Outfits, created for SSE, do not support her race. Thus one need to use xEdit to add the support (just copy races from Enderal outfit, technically). It took me around 20 hours of digging to get it working.
PSS.
Using NPC visual transfer tool and using this mod, you could create any number of followers, actually. I won't make a full description, as I am too lazy, but will describe main steps. It will be enough for familiar users.
You could skip steps 1-5 if you only want to edit Amanda itself
1) Rename Amanda.esp to any one you wish (Liya, for example)
2) Go to EnderalEdit and recreate seq file, as well as rename follower to any name under actor
3) I do suggest to remove default outfit record
4) Unpack BSA, rename Amanda.esp folders to Liya.esp (example) and add newly generated seq file
5) Pack BSA back and replace original one
Now you have a follower with the very same look/skills/scripts - everything, but it is not Amanda anymore. This way you could create any number of them.
6) Using NPC visual transfer tool (you will need to use SSEEdit for this) create a esp, transfering the visuals from any other skyrim SE follower (I still do suggest not to transfer outfit). Please note that SSEEdit uses plugins.txt from SSE folder, so to manage load order you will need to add esp names to your SSE plugins.txt file. NPCVT esp MUST be under all followers esp you are trying to edit - sticky post under mod page of NPCVT is incorrect about it (vortex users)
7) In the esp created, make sure the race of the actor is the same as original Liya (example), replace if needed
8) For all default body (naked hands/feets/body) armor addons make sure the supported races are the same as original Liya (example) armor addons
9) If you need SE outfit, make sure to remove all DLC references and add support for all Enderal races in its esp.