thanks for this info, to fix it open the Custom.cfg or in mediator tuningpalette and edit the following. change #define TuningColorLUTDstTexture "RGS_E3_LUT.png"
to RGS_Enhanced_LUT.png
thats my fail sry for this. i will change this the days
Out of curiosity, is this similar to your other mod Ravens Extended Graphics Edition? I cant seem to find that one any longer and was just wondering about it. This one also looks great as well!
RGS is my actual Project yes , i dont support my Other ^^ so im hide them. in the most areas it looks to dark etc. And RGS covered 4 presets when you need help for the installation, im happy to side. Calibrate your monitor thats a most important step ^^ i have read this here in the FAQ (for nvdia users or on the description page. ) so then it looks good.
my monitor have 12 bpc support ^^ thats not for all not a problem on your side. your monitor supportet lower bpc but thats ok choose the highest setting. after calibrate and have fun my friend ^^
and for natural i have an update file when you dont like the red tint use this
I love your work. Best Reshade so far. I using the "normal" version, without deph of field (dont like it, even vanilla). Tryed Cine, but I can not make it clearer, even changing settings in the Nvidia panel, how do you explain in description. I would like to know if there is some settings to low the ambient light far from Geralt. The constructions, trees, etc... are to bright. Much bloom to my taste. I prefer something with more contrast and more clear. Obviously I refering day time with sun. The horizon is too bright. Thank you !!!!
thanks for this comment im using not ambient light but 2 bloom effects ^^ you can turn of these when it is to bright. GAUSS is a bloom effect i think this have a most birhtness.
have you calibrate the monitor after changing the nvidia colors ? NexT: after eachwindows startup you must updating thease setting again. open control center and udate the colors and ready ^^
Gauss in CustomFx.cfg
#define USE_GAUSS 1 //[Gaussian] //-Gaussian Blur / Bloom / Unsharpmask ( you need fps set it to 0 ) or you can edit this
#define BloomStrength 0.46 lower value lower bright ^^
when it is to bright after this changing to 0 you can disable the other bloom to in the gemfx.cfg
and go to
#define USE_BLOOM 1 change this to zero ^^
I hope it helps you. Alternatively, I am still happy to disposal
You're my hero, Sir. #define BloomStrength 0.15 Perfect to me. Visual is amazing to my taste. Now I can se the clouds in horizon .Thank you. Great work !!!!!
naja kann man nichts machen ^^ ich arbeite dran und wem es gefällt gefällt es wem nicht halt nicht das kann ich nich beeinflussen und thx ist aber noch nichts fertig möchte die Description noch weiter optimieren das sie leicht handzuhaben für jeden ist und alles abdeckt
You're the first person I've seen on here also with a 970 instead of a 980. What do you set the overclock settings to for your pc? Unless the settings ( 169 mhz , 250 ram ) indicate what you oc'ed it to. I haven't looked at the settings recently so I don't know what the default is.
oc base clock of the card is 1316 . so i have added 169 mhz = 1485 mhz ( with my oc ) i´m not need to chance the voltage on this clock (by me) and memery clock 250 added. power limit 110 and temp limit 80 so thats my setting for the msi card but Each graphics card is different. test you card in 10 steps to the cor clock when you see the cor clock gos down you need change the voltage ^^ so i will not change this that im use 169 mhz 25 steps by memory i think 250 is ok ^^
40 -55 fps with my setting and 1440p is realy good and with 1090p over 60 frames
I just got my new laptop with the 970 built in, and I haven't had the need to try oc'ing it yet, but after seeing these screen shots i may have to try it lol. Thanks for the help.
Yeah I've heard that as well. I've also been reading that modern GPU's have systems in place to prevent burning out. One of my old ones did not have that feature and I paid for it, literally.
@davies: graphic cards of today cant be destroyed so easily.You must really want to destroy it,before that happens.As long as you dont flash your card with a custom bios,those sliders in the MSI afterburner can not really damage anything.Before that happens,your game will just crash,and drivers will automatically be reloaded.
But OC in a laptop is another thing.Higher voltage and high memory clocks will cause more heat,and a laptop can not really handle the heat as there is no room for air-circulation.You probably could heighten the core clock and Power limit,but I suggest not playing too much with the other mentioned values
Ah,and PS: Heighten the voltage on a card is nothing that could make you lose your warranty,as Nvidia cant say this was caused manually by you,or happened through a voltage issue in your living rooms. Only if you flash your card with a custom bios,or open the hardware yourself you will lose your warranty
Hey digger, mal ne Frage habe meinen Bildschirm über DVI angeschlossen, ich hab beim Nvidia gar nicht deine Einstellungs optionen :-( Heißt das ich Muss den Bildschirm über HDMI anschließen oder habe ich nur irgendwas verballert?
mh ^^ eigentlich nicht deinstalliere mal treiber und installiere dann neu. wenn du windows 10 nutzt würde ich die auto updates auf der Grafikkarte ausschalten sonnst installiert dir windows mal ebend nen treiber den du nicht mitbekommst . systemsteuerung/system/erweiterte Systemeinstellungen da auf hardware und dann das untere ^^ da die auto updates austellen. also ich hab mei monitor zwar über hdmi dran aber ich glaube nicht das es nur damit geht ^^ weiß es aber auch nicht genau. alternativ wenn du die farben von nvida nich nutzen kannst stelle einfach den contrast ingame ein wenig runter sollte auch gehen
calibrieren solltest du den monitor aber trotzdem egal ob nvdia farben oder nicht ^^ besseres gameplay für jedes spiel
Okay danke dir, also kalibriert ist der Monitor :-) Komme aber aktuell nicht zum testen von deinem Preset weil der Mediator mir die Fehlermeldung bringt: "Das Gerät nicht bereit" Irgendeine idee was ich dagegen machen muss?
mh kannst du den patch switchen ? bzw mediator nich im witcher 3 ordner nutzen sonnst spinnt der rum ^^ da wo mediator ist müssen reshade32.dll und auch die 64 dll liegen dürfen nicht umbenannt sein daher halt aufm desktop oder so nen ordner mach dir nen ordner namens ReShade da kopierst du alles rein von ReShade 1.1.0 dann mein preset da rein und den mediator öffnen und den witcher 3 suchen wo die exe ist. preset auswählen , auf apply ,update und auf application.. klicken wenn das nicht geht
alternativ kannste dir auch den = all in one manuell installieren für die meisten einfacher. reshade 1.1.0 downloaden dann ReShade ordner, reshade64.dll in bin/x64 reinhaun die dll zu d3d11.dll oder dxgi.dll umbennen dann mein preset zb Natural draufklicken den bin ordner einfach in den hauptorder rein kopieren alles überschreiben und fertig.
Okay also hab eigentlich alles so gemacht gehabt wie in deinem Video. Habe einen Ordner auf dem Desktop, dateien drin, deine presets eingefügt..und sobald ich bei der Game.exe auf update gehe, bekommt ich die Fehlermeldung :-/
kannst du mal nen screenshot davon machen. dann kann ich dir da sicher weiterhelfen . bzw warte mal ich schmeiß bei mir mal alles runter an installierten reshades vieleicht hab ich ja nen fehler gemacht ^^
kommt die meldung dann vom spiel oder vom Mediator ? wenn sie vom spiel selbst kommt kanns eig nich der reshade sein. Wenn jetzt beim mediator noch mhh dann bin ich gerade auch ratlos. muss ich die tage mal schauen was es sein könnte
aber manuell gehts ? hier nen video fürs manuelle gerade gemacht ^^
ich danke dir dafür das du mir gesagt hast das der mediator bei anderen wohl nich ganz fehlerfrei ist freut mich wenn es jetzt geklappt hat ^^ gefällt dir das preset nehme mal an sicher natural ? ^^
Hulks texturen habe ich drauf :-P Warte bei LOD noch auf das Update ;-) Mal was anderes, mir kommt es irgendwie so vor als wäre das Bild irgendwie...blasser, liegt das an der Bildschirm Einstellung?
habe das setup halt mit den nvidia colors gemacht und die sind intensiver ^^ daher wahrscheinlich versuch das mal mit den treiber. oder halt brightness ingame runterschrauben
Werde heute mal ein HDMI Kabel anschließen und es dann nochmal versuchen :-) Was hast du denn im Nvidia Controll Panel den Gamma Wert und so eingestellt?
EDIT: Es lag am Kabel, nur über HDMI hat man die Einstellungen die du zeigst :-) Habs per HDMI an den Fernseher angeschlossen und seit dem sieht es einfach meeega geil aus, keine verblassten Frarben mehr, sondern genau so wie auf einen Bildern
so wie es sein soll musst halt danach trotzdem calibrieren ^^ ah ok das ist gut zu wissen. habe ansonnsten keien einstellungen an gamma etc über nvdia gemacht calibriert nur per monitor. es geht nur um die 12 bpm ^^
im playing with natural + stlm 2.1 or with vanilla enhanced 4 -7 fps loss is not hard for my opinion. my latest versions are performence friendly ^^ im playing on 1440p with 40 -60 fps i think thats ok. with 1920x1080 over 60 frames
112 comments
For Cine set ingame Gamma on High when use the Nvida Colors (pbc ) or when it is to dark.
For NVDIA Users
Color settings and calibrate
NVDIA Control Settings
recommendend settings for optimize performance/no stucks
ReShade Tweaks
how to change, add settings , toogle keys etc
ReShade Toogle Keys
change settings
Your Preset have Red tint
i have my presets optimize for Velen,Novigrad,Skellige and Kaer Morhen not for Whitegarden
White garden have a unrealistic tint sry for this but i can not change this the other places will lost on quality when i do this ^^
The colors in white garden is different and it is realy hard to make it looks good on all places with ReShade
Working on the Description,FAQ and tweaks
so that it is user -friendly
Preset Overview
Oginal Redesigned for STLm 2.1
Natural for STLM 2.1
Vanilla Enhanced for Vanilla
Cine for Vanilla
All presets have medium fps cost from 4 - 7 fps on 2560x1440 DSR
on 1920x1080 lower 1-5
1. working on performence guide for Witcher 3 for more fps / no stucks and more for you
2. working on new optimize ingame settings with RGS Graphics Settings Menue
In the Optinal Section :
added all single files who wants no all in one choose the optional section
IMPORTANT
please check ingame your gamma settings required is 1 ( basic)
you can change this in the User.settings from Witcher 3
documents/witcher3/user.settings
looking for this line and check it
GammaValue=1
calibrate your monitor see my FAQ here in the post section Section on this modpage
If anyone could make a video with all Prestes + comparions I would be happy
Greetings Black Raven90
#define TuningColorLUTDstTexture "RGS_E3_LUT.png"
to RGS_Enhanced_LUT.png
thats my fail sry for this. i will change this the days
I want to use your natural preset but I can't select 12 bpc. I have a HDMI connected monitor. Hope someone knows why I have this problem.
and for natural i have an update file when you dont like the red tint use this
when the preset does not look like on the screens Just register i will help you
I would like to know if there is some settings to low the ambient light far from Geralt. The constructions, trees, etc... are to bright. Much bloom to my taste. I prefer something with more contrast and more clear. Obviously I refering day time with sun. The horizon is too bright.
Thank you !!!!
have you calibrate the monitor after changing the nvidia colors ?
NexT: after eachwindows startup you must updating thease setting again. open control center and udate the colors and ready ^^
Gauss in CustomFx.cfg
#define USE_GAUSS 1 //[Gaussian] //-Gaussian Blur / Bloom / Unsharpmask ( you need fps set it to 0 ) or you can edit this
#define BloomStrength 0.46 lower value lower bright ^^
when it is to bright after this changing to 0 you can disable the other bloom to in the gemfx.cfg
and go to
#define USE_BLOOM 1 change this to zero ^^
I hope it helps you. Alternatively, I am still happy to disposal
Perfect to me. Visual is amazing to my taste. Now I can se the clouds in horizon
I build the settings according to my ideas , but if someone wants to change something so why not ; )
du bekommst hoffentlich noch das, was du verdienst (:
die neue desc page sieht super aus btw!
oc base clock of the card is 1316 . so i have added 169 mhz = 1485 mhz ( with my oc ) i´m not need to chance the voltage on this clock (by me) and memery clock 250 added. power limit 110 and temp limit 80 so thats my setting for the msi card but Each graphics card is different. test you card in
10 steps to the cor clock when you see the cor clock gos down you need change the voltage ^^ so i will not change this that im use 169 mhz
25 steps by memory i think 250 is ok ^^
40 -55 fps with my setting and 1440p is realy good and with 1090p over 60 frames
But OC in a laptop is another thing.Higher voltage and high memory clocks will cause more heat,and a laptop can not really handle the heat as there is no room for air-circulation.You probably could heighten the core clock and Power limit,but I suggest not playing too much with the other mentioned values
Ah,and PS: Heighten the voltage on a card is nothing that could make you lose your warranty,as Nvidia cant say this was caused manually by you,or happened through a voltage issue in your living rooms. Only if you flash your card with a custom bios,or open the hardware yourself you will lose your warranty
RGS Natural
Heißt das ich Muss den Bildschirm über HDMI anschließen oder habe ich nur irgendwas verballert?
Dankeschön
Gruß Lamacra
calibrieren solltest du den monitor aber trotzdem
Komme aber aktuell nicht zum testen von deinem Preset weil der Mediator mir die Fehlermeldung bringt: "Das Gerät nicht bereit"
Irgendeine idee was ich dagegen machen muss?
da wo mediator ist müssen reshade32.dll und auch die 64 dll liegen dürfen nicht umbenannt sein daher halt aufm desktop oder so nen ordner
mach dir nen ordner namens ReShade da kopierst du alles rein von ReShade 1.1.0 dann mein preset da rein und den mediator öffnen und den witcher 3 suchen wo die exe ist.
preset auswählen , auf apply ,update und auf application.. klicken
wenn das nicht geht
alternativ kannste dir auch den = all in one manuell installieren für die meisten einfacher.
reshade 1.1.0 downloaden dann ReShade ordner, reshade64.dll in bin/x64 reinhaun die dll zu d3d11.dll oder dxgi.dll umbennen
dann mein preset zb Natural draufklicken den bin ordner einfach in den hauptorder rein kopieren alles überschreiben und fertig.
Habe einen Ordner auf dem Desktop, dateien drin, deine presets eingefügt..und sobald ich bei der Game.exe auf update gehe, bekommt ich die Fehlermeldung :-/
gehe mal zu ReShade / PersonalFiles /Profiles und lösche den Witcher 3 ordner da is mein path von witcher drin daher wahrscheinlich
Bekomme trotzdem die gleiche Fehlermeldung :-(
aber manuell gehts ? hier nen video fürs manuelle gerade gemacht ^^
https://www.youtube.com/watch?v=2W_x2sR20v8
Und jaaa na klar natural, muss ja meine 980ti ausreizen :-P
this settings in McFX.cfg
#define USE_DEPTHOFFIELD 0 //[DOF] //- ( set it to 1 for using DOF)
ich spiel mit dem nich ^^ ich spiele auf 1440p 45 -60 fps windows 10 ist optmiert , nvdia etc
als mods kann ich noch den LOD, und hulks texturen empfehlen
Warte bei LOD noch auf das Update ;-)
Mal was anderes, mir kommt es irgendwie so vor als wäre das Bild irgendwie...blasser, liegt das an der Bildschirm Einstellung?
Was hast du denn im Nvidia Controll Panel den Gamma Wert und so eingestellt?
EDIT: Es lag am Kabel, nur über HDMI hat man die Einstellungen die du zeigst :-)
Habs per HDMI an den Fernseher angeschlossen und seit dem sieht es einfach meeega geil aus, keine verblassten Frarben mehr, sondern genau so wie auf einen Bildern
////------------//
///**LENSDIRT**///
//------------////
#define USE_LENSDIRT 1
set it to 0 in the gemfx.cfg and have fun ^^
better performence and maybe they like them , too