This mod is the release of a mod developed by me initially for the Legendary Edition, now available here also for the Special Edition and Anniversary Edition versions of Skyrim. The .esp is converted to Form 44 format, and all the .NIFs (meshes) and .DDSs (textures) are optimized in the correct ways to run in both SE and AE, requiring absolutely no further work on your part.
When possible, my releases to SE and AE are flagged as .ESLs, which means they don't take up an .ESP slot in the users load order. However, this is not always possible. Below, you can check the three possible scenarios and check which scenario applies to this specific release. Since the other two will be crossed out, and the correct one will be marked in yellow:
The mod is flagged as .ESL, so it won't take up space in your load order, and yet it will be read and executed perfectly by your game;
The mod is not flagged as .ESL, just like a normal .ESP, because it has FaceGen data on it, so if it was flagged, whoever is not using the last official updates for SE or AE, including most pirated Skyrim users, will have the NPCs added by this mod having the gray face bug. However, if you have the latest update installed, you can flag this mod as an .ESL using SSEEdit, at your own risk, but generally with no problems;
The mod is not flagged as .ESL, just like a normal .ESP, as it requires the use of .SEQ files. In all the tests I did, even regenerating the .SEQ files after flagging the .ESPs as .ESLs, the dialogues stopped working. So, to maintain the integrity of dialogues and even quests added by my mods with .SEQ files, you should not attempt to flag this file under any circumstances, and you should use it in the exact way I made it available for download. UPDATE(feb/23): I recently learned a safe method of .ESLfication of .ESPs with .SEQ files, however due to the considerable work involved it is generally only justified in mods with just a few lines of dialog. If this mod is not flagged as .ESL, it is due to the number of dialogs present in it, which would make the process slow and/or unfeasible within a reasonable amount of time.
One last comment: there is a common misconception that all LE meshes need to go through NifOptimizer in order to be used in SE or AE, with the most varied arguments defending this, and a few absurdities about what would happen if it wasn't done. This is just another one of the myths that this community believes without any basis, and that it spreads only because it saw many people repeating the same thing. DO NOT OPTIMIZE meshes, neither mine nor any from other mod's. Most meshes are ready to run directly from LE to SE. NifOptimizer should only be used in cases where they DO NOT WORK DIRECTLY WITHOUT BEING OPTIMIZED. Using NifOptimizer indiscriminately without need, and without knowing how to do it correctly, leads to terrible consequences, being able to damage UV's, Normal Maps, the very 3d structure of the models, and much more, in short, causing more problems than the possible problems you could have with 1 in every 100 meshes needing to be optimized, something you would later do manually and individually when proven necessary. JUST DON'T PASS MESHES THROUGH THE NIF OPTIMIZER EXCEPT IF THEY JUST DON'T WORK IN THE SPECIAL EDITION OR ANNIVERSARY EDITION AFTER YOU TESTED THEM YOURSELF FIRST.
It's a fact that yes NifOptimizer can solve problems in problematic Nifs, but in this case, and if these Nifs are mine, just contact me and I'll solve the problem for you. If you have really in-depth knowledge of how to correct any negative consequences of using the program on the problematic mesh, that's ok, do it, but if not, just contact me and I'll solve it, since the nif having the problem would be caused by a little oversight of mine while I was producing it, so would be my responsability to fix the problem as well.Unfortunately, because the use of NifOptimizer was recommended in many tutorials as a possible step, a lot of people took it as mandatory, and many fools started to use it as gospel and to convince others, but remember, it's not because it's on the internet that is real. There is absolutely NO such thing as an "old nif format". NiTriShape works perfectly in SE and AE, it is NOT necessary in any way to convert the .nifs to BSTriShape format for them to run smoothly in game, and this messy conversion can even lead you to severe ingame problems. Unfortunately, 3 or 4 paranoids managed to create a legion of players who live in constant panic of corrupting their games, and in an attempt to avoid it, they end up diving into a corruption many times greater, created by themselves, unnecessarily.But don't just take my word for it based on my years of experience and dedication to this activity, listen to Arcane University's own words about it, possibly the best center of studies on modding for The Elder Scrolls available on the internet: (image extracted from the link: https://wiki.beyondskyrim.org/wiki/Arcane_University:NIF_Data_Format)
Play more, have more fun, and let the authors be responsible for the technical condition and functionality of the mods they release. And if you don't trust them enough to use mods without trying to fix what often doesn't need to be fixed, just stop using those mods.
Take care, and if you have any doubts, look for me on my Discord server, Mihail
Is there a way to get the spells without the artifacts? I just want the Totem for my player character and the rest for my follower who I gave the amulet and ring to.
I was going through ssedit to balance things out, and I noticed something that I am not sure if you know or not. From what I can tell in ssedit the transformation spell force equips the necromaster armor which kind of acts as like if you had your dwarven power armor equipped from your other mod. The only problem with this is that you don't actually have the full 600 armor from necromaster armor skin due to skyrim looping the values once once you hit you get around somewhere around the 440 to 470 value. What this means is that unless you made a work around for this you actually only have around 160 to 130 armor in the form instead of 600 to 700. I know you have way more modding experience than I do, and it is very possible that there is a workaround for this that I just don't know about that you are using. I just figured I would let you know anyway just in case you wanted to know.
Edit: What I did to adjust this in my game was to lower the armor value on the skin armor to 400 then I added 100 armor to both the ring and the necklace to bring it back up to 600.
Amazing job. You keep making your mods better and better. I originally did not download this because I did not know how to balance things in ssedit, but now that I know, I am looking forward to it. I think I am going to have to nerf the player's new transformation immensely because at first glance it looks like it would be crazy op with the way I have my modded skyrim set up due to the sword damage and the duration of the conjuration spells, but the quality of the mod looks amazing. I am looking forward to the boss fight in the soul cairn for this transformation.
I am wanting to create a New Necromancer character and just discovered you. I am a little confused. What is the difference between this one and Herald of Death? I scroll down in the description and see the same things. Can I install BOTH, and just overwrite some things? Thanks for any help.
Also, can I find or purchase these new necromancy spell books? Like that Summon Minions one?
the herald of death is a bundle that includes necromaster skills, with herald of death you don't need necromaster skills. the spells can be obtained when you equip the 2 artifacts on the mod.
Maybe you can consider in near future using Backported Extended ESL Support to make your mods...Using this you can marked all your futures mods or updates as Flagued ESL , isn´t it ^.^?
64 comments
The mod is flagged as .ESL, so it won't take up space in your load order, and yet it will be read and executed perfectly by your game;The mod is not flagged as .ESL, just like a normal .ESP, because it has FaceGen data on it, so if it was flagged, whoever is not using the last official updates for SE or AE, including most pirated Skyrim users, will have the NPCs added by this mod having the gray face bug. However, if you have the latest update installed, you can flag this mod as an .ESL using SSEEdit, at your own risk, but generally with no problems;JUST DON'T PASS MESHES THROUGH THE NIF OPTIMIZER EXCEPT IF THEY JUST DON'T WORK IN THE SPECIAL EDITION OR ANNIVERSARY EDITION AFTER YOU TESTED THEM YOURSELF FIRST.
It's a fact that yes NifOptimizer can solve problems in problematic Nifs, but in this case, and if these Nifs are mine, just contact me and I'll solve the problem for you. If you have really in-depth knowledge of how to correct any negative consequences of using the program on the problematic mesh, that's ok, do it, but if not, just contact me and I'll solve it, since the nif having the problem would be caused by a little oversight of mine while I was producing it, so would be my responsability to fix the problem as well.Unfortunately, because the use of NifOptimizer was recommended in many tutorials as a possible step, a lot of people took it as mandatory, and many fools started to use it as gospel and to convince others, but remember, it's not because it's on the internet that is real. There is absolutely NO such thing as an "old nif format". NiTriShape works perfectly in SE and AE, it is NOT necessary in any way to convert the .nifs to BSTriShape format for them to run smoothly in game, and this messy conversion can even lead you to severe ingame problems. Unfortunately, 3 or 4 paranoids managed to create a legion of players who live in constant panic of corrupting their games, and in an attempt to avoid it, they end up diving into a corruption many times greater, created by themselves, unnecessarily.But don't just take my word for it based on my years of experience and dedication to this activity, listen to Arcane University's own words about it, possibly the best center of studies on modding for The Elder Scrolls available on the internet: (image extracted from the link: https://wiki.beyondskyrim.org/wiki/Arcane_University:NIF_Data_Format)
Play more, have more fun, and let the authors be responsible for the technical condition and functionality of the mods they release. And if you don't trust them enough to use mods without trying to fix what often doesn't need to be fixed, just stop using those mods.
Take care, and if you have any doubts,
look for me on my Discord server,
Mihail
Edit: What I did to adjust this in my game was to lower the armor value on the skin armor to 400 then I added 100 armor to both the ring and the necklace to bring it back up to 600.
Also, can I find or purchase these new necromancy spell books? Like that Summon Minions one?
the spells can be obtained when you equip the 2 artifacts on the mod.
Maybe you can consider in near future using Backported Extended ESL Support to make your mods...Using this you can marked all your futures mods or updates as Flagued ESL , isn´t it ^.^?
Best regards!