File information
Last updated
Original upload
Created by
ZeibachUploaded by
ZeibachVirus scan
Tags for this mod
Activity logs
This page was last updated on 19 December 2022, 9:33PM
- Changelogs
-
-
Version 0.12.3
- Add support for CCL locomotives with cylinder count different from 2.
-
Version 0.12.2
- Fix cold start handling.
-
Version 0.12.1
- Fix rate calculations for steam dump, water dump, and injector.
-
Version 0.12.0
- Partial support for CCL custom steam locomotives.
- Fix bug causing SH282 coal to not provide as much heat energy as intended.
- Unify low-speed and high-speed traction simulations.
- Preliminary model for steam flow restriction through valves, reducing available power as speed increases.
-
Version 0.11.0
- Rebalance boiler efficiency and coal usage based on period PRR test data.
- Rebalance shovel capacity and fire air requirements based on period BR test data.
- Prevent whistle steam plume from showing when not blowing the whistle.
- Remove various efficiency settings and replace with simple multipliers on resource consumption.
-
Version 0.10.0
- Add delay for changes in smoke color.
- Ensure exhaust noises are still audible when condensation is occurring in the cylinders.
- Enable unit selection in Heads-Up Display mod.
-
Version 0.9.9
- Fix settings not getting reset to defaults when updating.
- Fix simulation singularity when boiler is emptied of water.
- Improve safety valve simulation.
- Reduce default steam generation rate.
-
Version 0.9.8
- Simulate dual safety valves and add configuration options. Improve steam plume from safety valves.
- Add setting to set front-end (exhaust) efficiency.
- Increase maximum cutoff to 90% to match PRR L1s.
- Increase transparency of smoke when burning cleanly.
-
Version 0.9.7
- Rebalance resource consumption (coal, water).
- Rebalance wheelslip at moderate speeds.
- Add settings to adjust torque output and steam consumption efficiency.
- Increase maximum blower capacity.
- Add readout for boiler water temperature for HUD mod.
-
Version 0.9.6
- Fix coal being dumped for ~0.5 seconds when re-entering the cab.
-
Version 0.9.5
- Fix stoker control resetting to 0 when entering the cab.
-
Version 0.9.4
- Adjust coal dump valve threshold to make it harder to leave on accidentally.
-
Version 0.9.3
- Fire out valve acts as a dump for coal from the firebox.
-
Version 0.9.2
- Adjust volume of steam chuff SFX.
- Increase tender coal capacity, reduce water capacity.
- Increase tender and SH282 weight.
-
Version 0.9.1
- Add setting for initial steam boiler pressure.
-
Version 0.9.0
- New, more realistic boiler and cylinder simulations contributed by Knsgf. The energy of heating the boiler water is now reflected, greatly stabilizing boiler pressure both when increasing and decreasing pressure.
- New option to adjust opacity of the chimney smoke.
- Smoke puffs from cylinders are now alternate sides.
- You are required to use high cutoff from a stop to ensure steam is able to enter the cylinders.
-
Version 0.8.3
- Fix for tender joint when owned by the tender instead of the locomotive.
-
Version 0.8.2
- Additional potential fix for steam engines getting damaged when spawning.
-
Version 0.8.1
- Fix stoker valve when running with the Locomotive Lights mod.
-
Version 0.8.0
- Add steam-driven mechanical stoker.
- Fix for steamer sometimes getting damaged on spawn.
- Set damper to fully closed when a steamer is spawned.
- Reverse mousewheel action on regulator handle: down = pull, up = push.
- Add setting to show or hide additional float in the boiler sight glass.
- Clean smoke now shows as clear instead of a light gray.
- Add settings to adjust smoke plume.
-
Version 0.7.3
- Fix coalbox loading from save.
- Increase granularity for injector.
- Improve performance when coal chunks are consumed.
- Adjust chimney smoke quantity.
-
Version 0.7.2
- Add checking to avoid coal chunks of zero mass causing a divide-by-zero.
- Fix chimney smoke coming from locomotives with unlit fires.
- Reduced amount of smoke generated at low fire burn rates.
-
Version 0.7.1
- Fix water dump valve causing steam generation.
- Fix safety valve not keeping up with high steam generation rates.
- Fix fire self-lighting at low temperatures.
- Adjust order and formatting of HUD mod display integration.
-
Version 0.7.0
- Complete firebox simulation rewrite with advanced draft handling.
- Injector knob is now curved so it is easier to continuously inject small amounts of water.
- Injecting water affects steam generation rate, and may cause loss of steam presssure through condensation.
- Fixed stretchy tender coupler.
- Default damper to full-open position.
- Chimney smoke changes color to reflect firebox combustion efficiency. Black = inefficient, white = maximum efficiency.
-
Version 0.6.1
- Fix regulator stem animation.
- Adjust steam efficiency at cutoffs below 25%.
- Eliminate slack in the locomotive-tender joint.
- Increase vent rate of safety valve.
-
Version 0.6.0
- Add setting for boiler water consumption.
- Add ball float to boiler sight glass to make the current water level more visible.
- Reverse the regulator and draft damper controls for better realism.
- Reduce how quickly the boiler loses pressure when the fire is out.
- Prevent the firebox from cooling below the boiling point.
-
Version 0.5.2
- Fix compatibility with Heads-up Display v0.3.0.
-
Version 0.5.1
- Fix crash when running v0.5.0 without HeadsUpDisplay installed.
-
Version 0.5.0
- Add a new boiler steam production model, accounting for the effect of pressure on boiling point and energy transfer from the firebox.
- Reduce the default maximum boiler pressure to 14 bar (~200 psi).
- Reduce the rate of passive steam leakage from an undamaged boiler.
- Data overlay has been separated into its own mod.
-
Version 0.4.0
- Add more realistic low-speed traction modelling.
- Add option for overlay with steam locomotive information.
- Add setting for boiler safety valve threshold.
-
Version 0.3.0
- Curve cutoff wheel response, making small cutoff values easier to access in VR.
-
Version 0.2.0
- Add setting for boiler steam generation efficiency
-
- Author's activity
-
December 2022
-
19 Dec 2022, 9:33PM | Action by: Zeibach
Changelog added
'Change log added for version 0.12.3'
-
19 Dec 2022, 9:32PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.12.3]'
July 2022
-
06 Jul 2022, 10:30PM | Action by: Zeibach
Changelog added
'Change log added for version 0.12.2'
-
06 Jul 2022, 10:29PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.12.2]'
June 2022
-
17 Jun 2022, 2:42AM | Action by: Zeibach
Changelog added
'Change log added for version 0.12.1'
-
17 Jun 2022, 2:41AM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.12.1]'
-
10 Jun 2022, 1:50AM | Action by: Zeibach
Changelog added
'Change log added for version 0.12.0'
-
10 Jun 2022, 1:46AM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.12.0]'
April 2022
-
11 Apr 2022, 7:26PM | Action by: Zeibach
Changelog added
'Change log added for version 0.11.0'
-
11 Apr 2022, 7:23PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.11.0]'
-
07 Apr 2022, 10:43PM | Action by: Zeibach
Changelog added
'Change log added for version 0.10.0'
-
07 Apr 2022, 10:42PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.10.0]'
March 2022
-
31 Mar 2022, 8:37PM | Action by: Zeibach
Changelog added
'Change log added for version 0.9.9'
-
31 Mar 2022, 8:36PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.9.9]'
-
25 Mar 2022, 1:01AM | Action by: Zeibach
Changelog added
'Change log added for version 0.9.8'
-
25 Mar 2022, 12:59AM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.9.8]'
-
20 Mar 2022, 8:22AM | Action by: Zeibach
Changelog added
'Change log added for version 0.9.7'
-
20 Mar 2022, 8:19AM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.9.7]'
February 2022
-
09 Feb 2022, 8:32PM | Action by: Zeibach
Changelog added
'Change log added for version 0.9.6'
-
09 Feb 2022, 8:31PM | Action by: Zeibach
File added
'SteamCutoff.zip [version 0.9.6]'
-
- Mod page activity
-
April 2024
-
27 Apr 2024, 5:23AM | Action by: leazar11
Tracked
'Realistic Steamer Overhaul'
-
13 Apr 2024, 2:47AM | Action by: Tek2Q
Tracked
'Realistic Steamer Overhaul'
-
03 Apr 2024, 7:13PM | Action by: Revlutioner
Endorsed
'Realistic Steamer Overhaul'
March 2024
-
23 Mar 2024, 1:59AM | Action by: Hellonwheels999
Endorsed
'Realistic Steamer Overhaul'
-
07 Mar 2024, 2:28PM | Action by: evlmidgt
Tracked
'Realistic Steamer Overhaul'
-
06 Mar 2024, 12:26AM | Action by: isaac1912
Endorsed
'Realistic Steamer Overhaul'
-
05 Mar 2024, 11:06PM | Action by: joebro09
Endorsed
'Realistic Steamer Overhaul'
-
05 Mar 2024, 12:53AM | Action by: Michmachine2012
Endorsed
'Realistic Steamer Overhaul'
-
04 Mar 2024, 1:56PM | Action by: Samu27630
Endorsed
'Realistic Steamer Overhaul'
February 2024
-
29 Feb 2024, 12:10PM | Action by: BristolBiggles99
Untracked
'Realistic Steamer Overhaul'
-
28 Feb 2024, 5:34AM | Action by: Nikki5629
Endorsed
'Realistic Steamer Overhaul'
-
26 Feb 2024, 9:40PM | Action by: jmacandcheese
Endorsed
'Realistic Steamer Overhaul'
-
25 Feb 2024, 4:46PM | Action by: dvcorvette
Tracked
'Realistic Steamer Overhaul'
-
13 Feb 2024, 2:17PM | Action by: bossnohito
Untracked
'Realistic Steamer Overhaul'
-
08 Feb 2024, 4:24PM | Action by: dbstenberg
Tracked
'Realistic Steamer Overhaul'
-
02 Feb 2024, 6:10AM | Action by: Allingmod
Endorsed
'Realistic Steamer Overhaul'
January 2024
-
29 Jan 2024, 1:58AM | Action by: juserickson5
Endorsed
'Realistic Steamer Overhaul'
-
28 Jan 2024, 4:10AM | Action by: JeepTractorGuy
Endorsed
'Realistic Steamer Overhaul'
-
22 Jan 2024, 12:15AM | Action by: BillMysCi
Endorsed
'Realistic Steamer Overhaul'
-
15 Jan 2024, 12:10PM | Action by: AristarkhRUS
Endorsed
'Realistic Steamer Overhaul'
-