179 comments

  1. Spartan117B01
    Spartan117B01
    • BANNED
    • 9 kudos
    Sticky
    I have two questions.

    1: At the bottom of the description page, before DSR, you mention to enable these files Mode1.fx(FineSharp) Mode2.fx(FineSharp) Mode3.fx(FineSharp) in the ReShade menu. But none of the files are a part of your mod. How do I enable those 3 files?

    2: How do I know if the console.txt file is working? I've created both the CONSOLE.txt and BmInput.ini in the correct locations but when I hit the F11 Key (Remapped it from F12) I notice no change. Is this file autoloaded?
    1. jtt211
      jtt211
      • premium
      • 89 kudos
      1. These files come with the ReShade Installer, but if you don't selected them in installation process you can find these Shaders here -> https://github.com/crosire/reshade-shaders/tree/master/Shaders

      2. You will see post-processing removal.
      2.1 Enabled Post-Process


      2.2 After pressing "F12" from Console code


      Create CONSOLE.txt in this path -> Batman Arkham Knight\Binaries
      paste this code in CONSOLE.txt:

      set Engine.PostProcessEffect bUseWorldSettings false | Set Materialeffect bShowInGame false | set PostProcessVolume bEnabled false | set Engine.PostProcessEffect bShowInGame true | set Engine.PostProcessEffect bAffectsLightingOnly false
      turn off DOF: set BmGame.R3rdPersonCamera Debug_TurnOffZoomDof 1

      This is how your CONSOLE.txt should look:


      Create BmInput.ini in this path -> Batman Arkham Knight\DLC\356474\Content\BmGame\Config
      and paste this code:

      [Engine.PlayerInput]

      .Bindings=(Name="F12", Command="exec CONSOLE.txt")
    2. Spartan117B01
      Spartan117B01
      • BANNED
      • 9 kudos
      Thanks for the file link; Ironically I prefer the game without the 3 Mode files enabled. I did notice that sometimes the game won't load the ReShade at all. Is that a common issue?
    3. jtt211
      jtt211
      • premium
      • 89 kudos
      You don't need to enable all of 3 FineSharp Mode's, you can enable only 1 Mode or 1+2 Mode, or atleast only 3 Mode, turn them as you like, this is needed for emphasize high-resolution used via DSR. ReShade are working always, issue that happened to you are strange, try re-install ReShade or delete them and install again. But it may not work if you using Resorep, that means ReShade are don't compatible with Resorep, but you can use NVidia Freestyle for Gameplay+Photo-Mode only or Ansel for Photo-Mode only.
    4. skullmuncher3
      skullmuncher3
      • supporter
      • 18 kudos
      I'm having the same problem. Followed instructions exactly but F12 does nothing.
    5. ziNo132
      ziNo132
      • member
      • 0 kudos
      F12 does nothing here too. Followed instructions clearly.
    6. Dirfaniy
      Dirfaniy
      • member
      • 0 kudos
      Hi. When I press the f12 key, nothing changes,. Do I need to create a new BmInput.ini because there is already BmInput.ini in the BmGame /config directory, or  I just paste the code there?
    7. yg231
      yg231
      • member
      • 0 kudos
      gg
    8. Sup dawgy dawgs. 3 things 1.) right click the Bminput.ini and make sure read only is checked. 2.) Make sure its in "Batman Arkham Knight/Bmgame/Config" if all else fails, download this input/console.txt premade files and go crazy! https://www.nexusmods.com/batmanarkhamknight/mods/512
    9. qauxs
      qauxs
      • member
      • 0 kudos
      does it even work cause nothing happens
    10. jtt211
      jtt211
      • premium
      • 89 kudos
      Try rebind this to F11 button, should work
    11. appleh4x
      appleh4x
      • member
      • 0 kudos
      The post process disable absolutely does not work or do anything in the current steam version of the game and neither does the https://www.nexusmods.com/batmanarkhamknight/mods/512 files, all that will do is give you an error message about config files.
    12. PhoenixC04
      PhoenixC04
      • supporter
      • 5 kudos
      You put it in the BmGame in the 474 DLC, not the main BmGame in the directory
  2. LordShadow999999
    LordShadow999999
    • member
    • 0 kudos
    Comparison video?
  3. ismaelcrack033
    ismaelcrack033
    • member
    • 0 kudos
    are main preset and arkham vision the same?
  4. ImLiterallyRedHood
    ImLiterallyRedHood
    • member
    • 0 kudos
    Im very late to this but will it work decently with an RTX 3060
  5. danysh17
    danysh17
    • member
    • 0 kudos
    can you do videoguide?
  6. SunnyGamin
    SunnyGamin
    • member
    • 0 kudos
    Hey there, im just running into an issue where, if i use smoke or go into fog or go into my gadget wheel, i can see 3d shapes of the materials in the game in faint white. I was wondering if there is a fix for this? Thanks
    1. Luisv1119
      Luisv1119
      • premium
      • 32 kudos
      Disable MXAO
  7. QuickSlver
    QuickSlver
    • member
    • 0 kudos
    Hiiii ! Just finish installing this mod and I have a issue. As soon as I finish installing everything, the water in game exept the rain just dissapear ? Wonder is there a solution to fix this ?  thankss
  8. fScayron
    fScayron
    • member
    • 0 kudos
    so i just download the latest arkhamvision2024.ini file and put it in reshade and that's it?? no need to download snowbox weather enhancers and all of the others?
  9. TFSazuro
    TFSazuro
    • supporter
    • 0 kudos
    First thanks for the work, but sadly i wish that you could adapt this preset to use it with the new renodx hdr implementation mod.
  10. KiefBC
    KiefBC
    • premium
    • 17 kudos
    Since the Install Instructions are not very good and clearly in this comments people are confused, I will outline it for everyone. This worked for me as of 2022 Summer.

    The Steam Guide recommends Lightroom from a Mediafire link, just use the one with the latest version of Reshade. You should only have to download 2 separate Shaders (Pirate/RTGI) and one of the Presets from the Downloads tab on this Mod.

    INSTALLING RESHADE (I use version 5.3.0 /w Addon Support)
    you can find all past releases in case something is wonky here (from the official Team) https://www.mediafire.com/folder/8ar1jhh1809cl/ReShade_Repository#myfiles

    NOTE: If you have installed Reshade on Arkham Knight before, instead of selecting "Modify" choose "Uninstall". Then proceed with installing Reshade again.

    - Select DX 9/11/12
    - During Install it will ask for Preset - Select The One You Downloaded (I use MXAO 1.7b Preset)
    - Should now just be Next -> Next -> Next -> Install blah blah blah

    INSTALLING PIRATE SHADERS
    I like them

     - Get them here: https://github.com/Heathen/Pirate-Shaders - Select the Latest Release
     - Place the "Shaders" and "Textures"  folder @ WHEREYOUINSTALLEDTHEGAME\Batman Arkham Knight\Binaries\Win64\reshade-shaders

    INSTALLING RTGI
    ray tracing wow

    - Get them here:  Google it or Subscribe to their Patreon (I do) @ https://www.patreon.com/mcflypg
    - Place the "Shaders" and "Textures" folder @ WHEREYOUINSTALLEDTHEGAME\Batman Arkham Knight\Binaries\Win64\reshade-shaders

    NOTE: Choose either Partial or Full 'Post Process' Removal. See what your Preset Requires. I prefer Partial over Full.

    PARTIAL PROCESS REMOVAL (This will depend on what your Preset requires, some need Full Post Process removal, some need Partial Post Process removal)

    - Go to WHEREYOUINSTALLEDTHEGAME\Batman Arkham Knight\Binaries
    - Create a CONSOLE.txt file
    - Put this in the file (Copy paste, dont worry about formatting)

    set Engine.PostProcessEffect bUseWorldSettings false | Set Materialeffect bShowInGame false | set PostProcessVolume bEnabled false | set Engine.PostProcessEffect bShowInGame true | set Engine.PostProcessEffect bAffectsLightingOnly false
    turn off DOF: set BmGame.R3rdPersonCamera Debug_TurnOffZoomDof 1

    FULL PROCESS REMOVAL 

    - I don't recommend it and neither does the Mod Author.

    CREATING ABILITY TO REMOVE THE PROCESSING via HOTKEY
    this will allow us to create a hotkey to remove the post-processing

    - Go to WHEREYOUINSTALLEDTHEGAME\Batman Arkham Knight\DLC\356474\Content\BmGame\Config
    - Create a new file called BmInput.ini (MAKE SURE THE EXTENSION IS .ini and not .txt)
    - Add the following code to the file

    [Engine.PlayerInput]

    .Bindings=(Name="F12", Command="exec CONSOLE.txt")

    ADD THE POST PROCESS BACK
    we add this in case you want the post-processing back

    - After adding the code above, paste this code below it.

    .Bindings=(Name="F10",Command="set PostProcessEffect bShowInGame True")

    WHEN IN GAME
    you MUST be loaded into the world for the Processing to be removed

    Load into Arkham City and Press F12
    Press "Home" and load up Reshade
    Select YOURPRESET and voila!

    WHAT I USE /w my 5900X / 3080 / 32GB (In order of load) @ Max Settings /w no PhysX Activated @ 3840x1600 @ 60FPS Locked.


    • MXAO
    • Lightroom
    • prod80 Filmic Tonemap
    • DELC Sharpen
    • prod80 RT Color Correct
    • RTGI
    • prod80 Correct Contrast
    • EyeAdaption
    • prod80 02 Bonus LUT
    • Colourfulness
    • Pirate Tonemap
    • Pirate Vibrance

    UPDATE 2024:

    I'm not sure the issue some of you are facing. I just did this again to confirm that it works and it does.

    I am going to assume it is something to do with you guys NOT showing File Extensions in your Windows Explorer - so when you create the BmInput.ini it is actually BmInput.ini.txt.

    In explorer (Any Folder you open) go to the Options -> View. Make sure that in the list, "Hide extensions for known file types" is UNCHECKED. So when you create the files required, they have the true extensions needed.

    You can change the F12 and F10 key command to any Keybind on your Keyboard, but that is up to you to figure out how to configure. I would advise keeping with the F keys such as F12, F11, F10, F9, etc.
    1. Shayoden
      Shayoden
      • member
      • 0 kudos
      Thanks very much.
      The instrunctions in the main post are very confusing..
    2. thedarkestminds
      thedarkestminds
      • member
      • 0 kudos
      What a Chad ! nice
    3. MarkosCharkos
      MarkosCharkos
      • member
      • 0 kudos
      I did everything as you did yet the partial proccess removal doesn't seem to work. Any solution? 
    4. vectorwolf01
      vectorwolf01
      • member
      • 0 kudos
      same here this needs to be updated did everything correctly PARTIAL REMOVAL DOESNT WORK!!!!!
    5. qauxs
      qauxs
      • member
      • 0 kudos
      i got the rgti and all the other stuff to work but i cant figure out how to do the partial post process
    6. KiefBC
      KiefBC
      • premium
      • 17 kudos
      I'm not sure the issue some of you are facing. I just did this again to confirm that it works and it does.

      I am going to assume it is something to do with you guys NOT showing File Extensions in your Windows Explorer - so when you create the BmInput.ini it is actually BmInput.ini.txt.

      In explorer (Any Folder you open) go to the Options -> View. Make sure that in the list, "Hide extensions for known file types" is UNCHECKED. So when you create the files required, they have the true extensions needed.

      You can change the F12 and F10 key command to any Keybind on your Keyboard, but that is up to you to figure out how to configure. I would advise keeping with the F keys such as F12, F11, F10, F9, etc.
    7. Just download this. The console.txt files and the Bminput.ini are already made for you and you can't f*#@ it up literally just copy and paste to main directory https://www.nexusmods.com/batmanarkhamknight/mods/512
    8. Tigjaw
      Tigjaw
      • premium
      • 1 kudos
      anyone getting this to work in 2024, which version of reshade are you using? Just installing reshade causes my game to crash on load.
    9. qauxs
      qauxs
      • member
      • 0 kudos
      I did it still doesnt work
    10. qauxs
      qauxs
      • member
      • 0 kudos
      did you get it to work?
    11. callmeali2003
      callmeali2003
      • member
      • 0 kudos
      Please tell me you found a solution cause I'm having this exact issue with Reshade with my game crashing while trying to load the overlay.
    12. NEONxKNIGHT
      NEONxKNIGHT
      • member
      • 0 kudos
      Thank you for the instructions. While I'm not using the RTGI (yet), I can confirm this worked for me as of June 2024.
    13. LegalAssassin21
      LegalAssassin21
      • premium
      • 0 kudos
      Following your guide, most everything works great! Thank you for sharing. Only issue is f10 wont bring the post processing stuff back for me. Any thoughts on that?
  11. For anyone out there; the ''remove silly effect'' mod affect the path of the Reshade. I had to remove the mod for this reshade to work. Made my game crash on loading.