Hey guys, sorry for the ages of inactivity! University has kept me super busy! Thank you for the kind words and support in the comments. I've just uploaded a new version with Dual Sheath Redux support built in, and a scabbard matching the Elucidator by Mr. Flopsie. Make sure you update and re-patch your Dual Sheath Redux after updating this mod. Unfortunately, I still don't have the time I need to improve upon the model/texture any further, but I wanted to give you guys some form of improvement until that happens or Flopsie releases his own Dark Repulser. Enjoy guys!
Here's the crazy thing. I can get the DSR to work with both swords, but only if elucidator is in the left hand! If I try and have elucidator in the right hand, than the repulser won't show up as sheathed on the left side. My OCD isn't going to let that fly. The only thing that I think I'm missing is this DSR patch people are talking about. I did run the proccer but it didnt place a patch in my load order.
Just downloaded and ran the patcher with the latest version, Dark Repulser is still not working with DSR.
EDIT: I'm an idiot, I forgot to check my load order after running BOSS, and my plugins weren't even close to being in the right order. Doing some experimenting now, will report back later.
2nd Edit: I got it working. If anyone else is having issues, what I did was downloaded the SUM manager for managing multiple Skyproc patchers. I had to disable BOSS sorting to get everything to work properly. Make sure your Dual Sheath patch is located somewhere after this sword, and any other mods you're running that need patching, and then run the patcher WITHOUT running boss. I'm not sure why, but BOSS was putting the repulser and several other weapons/armor mods I had after the patches, and that left them all ignored for some reason. This solved my problem and got everything working.
If this makes no sense, ignore it. This is what solved the problem for me and got everything working.
This actually makes tons of sense and I thank you greatly for posting it. It will likely be of help to many other people. I forgot to mention that I create my DSR patch without BOSS. I figured it was a problem with load order which is why I said to double check it in my last post, and it seems like BOSS is indeed the likely cause of peoples' issues.
For others who are having the problem, I suggest following the advice in the above post. Adjust your load order and ensure that Dark Repulser is before DSR, then patch DSR without BOSS. To run the DSR patcher without BOSS, simply make a shortcut to it and add -NOBOSS at the end of the shortcut target line, outside the quotation marks.
Here's an example of what your shortcut target might look like: "C:/Program Files (x86)/Steam/steamapps/common/Skyrim/Data/SkyProc Patchers/Dual Sheath Redux Patch/Dual Sheath Redux Patch.jar" -NOBOSS
For those of you having trouble with the sword in the left hand, be aware that I had a faulty version of the mod listed as the latest version for about a day that would indeed cause this problem, and is most likely your issue. Please make absolutely sure that you've downloaded the latest version (1.11) and that you have DSR and everything pertaining to it installed correctly. If you do, you should not be having this problem. DSR is an extremely easy mod to install and configure incorrectly.
Make sure that the Dark Repulser .esp is before DSR and it's patch .esp in your load order. I've just verified that everything is in working order on this mod's end. I re-downloaded and installed it straight from this site, adjusted the load order, re-patched DSR, and had it work flawlessly. The left hand mesh is there and properly defined, so I can pretty safely say any problems pertaining to this are due to something else.
Also for those of you saying that it also doesn't work with Elucidator, be aware that it does not currently natively support a left-hand version. You'll need to download the compatibility pack from that mod's page if you want to ( non-canonically ) have Elucidator sheathe on your left side.
Please post again if you are still having this problem after reading this and I will try to help as best as I can. I'd also appreciate someone posting if it IS working for them so I can get extra verification.
Okay, been looking at the comments, been trying to get this to work properly for about 2 hours now. So I have Dual Sheath Redux installed, swords on back, proper animations, etc, and when I try to use the Dark Repulser on my left hand, it wont show on my back, just, nothing there. However, if I use it in my right (with Elucidator on my left) it works fine. I've ran the Skyproc Patcher for DSR, and when I look at the patch's ESP file in NMM it doesn't list Dark Repulser as a master mod (however, it does for Elucidator and other similar files) so as far as I can tell, Skyproc isn't recognizing this mod as something that needs to be patched or something. Is there any fix to this? I only post a comment as a last resort, again, I've been trying for about 2 hours to get this to work properly. (Note, looking at DSR's page says that this is a problem when there isn't a left hand mesh, could it be that? I've seen other comments about this problem)
Hi, awesome mod Just a question, when I place the sword in the left hand like in your photos, the sword+scabbard doesn't appear on my character's back, yet when I place it in the right hand it works fine. Any idea why this could be happening? Thanks
Thanks! The swords being sheathed on the back is a result of a mod called Dual Sheath Redux. You'll need to get that if you want it to look exactly like the pictures. The requirements and install process of that mod are a bit more complex than most, but if you follow the instructions carefully you'll be fine. Good luck!
Hi, thank you for the mod! I was waiting ages for someone to make the Dark Repulser and yours turned out great! However I am having the same problem that Mikeskyy posted. If the Dark Repulser (or the Elucidator from the mod that you recommended) is in the left hand the left sword sheath does not show up on the back. I have installed Dual Sheath Redux and I've followed all of the instructions. Any idea why this might be happening? Thanks in advance!
Edit: Do you possibly have a mesh for the left sheath?
Give Feedback
52 comments
EDIT: I'm an idiot, I forgot to check my load order after running BOSS, and my plugins weren't even close to being in the right order. Doing some experimenting now, will report back later.
2nd Edit: I got it working. If anyone else is having issues, what I did was downloaded the SUM manager for managing multiple Skyproc patchers. I had to disable BOSS sorting to get everything to work properly. Make sure your Dual Sheath patch is located somewhere after this sword, and any other mods you're running that need patching, and then run the patcher WITHOUT running boss. I'm not sure why, but BOSS was putting the repulser and several other weapons/armor mods I had after the patches, and that left them all ignored for some reason. This solved my problem and got everything working.
If this makes no sense, ignore it. This is what solved the problem for me and got everything working.
For others who are having the problem, I suggest following the advice in the above post. Adjust your load order and ensure that Dark Repulser is before DSR, then patch DSR without BOSS. To run the DSR patcher without BOSS, simply make a shortcut to it and add -NOBOSS at the end of the shortcut target line, outside the quotation marks.
Here's an example of what your shortcut target might look like:
"C:/Program Files (x86)/Steam/steamapps/common/Skyrim/Data/SkyProc Patchers/Dual Sheath Redux Patch/Dual Sheath Redux Patch.jar" -NOBOSS
Make sure that the Dark Repulser .esp is before DSR and it's patch .esp in your load order. I've just verified that everything is in working order on this mod's end. I re-downloaded and installed it straight from this site, adjusted the load order, re-patched DSR, and had it work flawlessly. The left hand mesh is there and properly defined, so I can pretty safely say any problems pertaining to this are due to something else.
Also for those of you saying that it also doesn't work with Elucidator, be aware that it does not currently natively support a left-hand version. You'll need to download the compatibility pack from that mod's page if you want to ( non-canonically
Please post again if you are still having this problem after reading this and I will try to help as best as I can. I'd also appreciate someone posting if it IS working for them so I can get extra verification.
If the Dark Repulser (or the Elucidator from the mod that you recommended) is in the left hand the left sword sheath does not show up on the back. I have installed Dual Sheath Redux and I've followed all of the instructions. Any idea why this might be happening? Thanks in advance!
Edit: Do you possibly have a mesh for the left sheath?