Hi Guys and thanks for downloading ;-)

This is V1.4 of my Honolulu Intl. or Daniel K. Inouye International Airport, as it's called since April 2017.
This scenery contains a high-fidelity Lego-Brick airport with an accurate layout based on the included ortho-imagery made available by the USGS. Special attention has been given to the operational aspect, meaning that all gates and ground markings are in the exact place and enable close to reality ops within X-Plane 11. Further features are listed below.


Features:

Main Concourses - Diamond Head, Central, EWA, Inter Island & GO

Freight Apron - Main Freight Apron near the GA area in the East & small freight apron for Aloha Cargo west of the EWA concourse

GA area - Located in the south-east of the airport close to RWY4R with Hangars and marked tarmack tie downs

Air National Guard - Ramp starts and shelters for fighter A/C in the far west of the airport

F/A-22 Scramble post- Located close to RWY8L

Populated Gates - Gates are full with service vehicles, ramp equipment and support XP11's Ground Services.

Autogate and DGSs - Marginal's awesome Autogate plugin included

Highly accurate Taxiway-Layout based on the ortho-imagery of the USGS

Highly accurate RWY/Taxi/Apron Markings - including Gate Numbers, taxi restrictions, RWY & ILS holds as well as service roads

Many Ramp Start Locations - Either for you to choose or for AI A/C to populate

AI-Taxi-Network - AI A/C taxi correctly along the specified taxiways

Airport Flows - User and AI A/C will be assigned by ATC to the most appropriate RWY depending on wind conditions. (Will be enhanced in future updates)

HDR lights - Nice lighting at night in the right places



Installation:

As always, extract the content of the .zip-file and place it inside your "Custom Scenery" folder within your X-Plane 11 folder.
If the scenery should not show up, try editing the scenery_packs.ini file inside the Custom Scenery folder. This scenery package should always be above any other mesh or overlay package you have installed for Hawaii.
Just take a look at the scenery_packs_example.ini file for a valid order.

This scenery package relies like most other freeware on third party libraries, please make sure you have the following libraries installed in your "X-Plane 11\Custom Scenery" folder. Otherwise you'll receive an error message and X-Plane might crash.


MisterX Library: https://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension/

OpensceneryX 2.0: http://www.opensceneryx.com/

Ruscenery: http://ruscenery.x-air.ru/

FF Library - extended LOD version: https://forums.x-plane.org/index.php?/files/file/12836-ff-library-extended-lod-version/

The Handy Objects Library: https://forums.x-plane.org/index.php?/files/file/24261-the-handy-objects-library/

3D people library 3.5: http://forums.x-plane.org/index.php?app=downloads&showfile=26611

RE_Library: https://forums.x-plane.org/index.php?/files/file/24722-re_library-airport-buildings-and-related-objects/

BS2001 Object Library: https://forums.x-plane.org/index.php?/files/file/28045-bs2001-object-library/

Flags of the USA States: Real Flag II: https://forums.x-plane.org/index.php?/files/file/17092-flags-of-the-usa-states-real-flag-ii/

World models library: https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/

Marginal's Autogate plugin: https://forums.x-plane.org/index.php?/files/file/5038-autogate-plugin/



Copyrights:

USGS Products Aerial Ortho-Imagery - Data available from the U.S. Geological Survey - http://earthexplorer.usgs.gov/


Golf1 - boarding stairs - http://forums.x-plane.org/index.php?app=downloads&showfile=19458


Skycyle - B717 - http://forums.x-plane.org/index.php?app=downloads&showfile=18438


Planebuilder - C-17 Globemaster III Static Aircraft - http://forums.x-plane.org/index.php?app=downloads&showfile=173


Planebuilder - C-5B Galaxy Static Aircraft Set - http://forums.x-plane.org/index.php?app=downloads&showfile=172


Michael Hoge - XP10 Default Military Aircraft to Static Objects v1.3 -http://forums.x-plane.org/index.php?app=downloads&showfile=17329


Cami de Bellis - PHNL Ground Tower


Char1ie473 - Hangars 1.1 - http://forums.x-pilot.com/files/file/371-hangars/


Marginal - Autogate Kit 1.50 - http://forums.x-plane.org/index.php?app=downloads&showfile=616


Jacques Brault - JB Hangars Collection - http://forums.x-plane.org/index.php?app=downloads&showfile=18453


Flybyguy - Wheel Chocks - http://forums.x-plane.org/index.php?app=downloads&showfile=24385


X-Design CSD - XPL Taxi Sign Generator

Dkm - 3D people library 3.5 - http://forums.x-plane.org/index.php?app=downloads&showfile=26611


Additional notes on the aerial orthoimagery:

The included orthoimages were downloaded from the U.S. Geological Survey (http://earthexplorer.usgs.gov/)

The images remain the property of the U.S. Geological Survey and may only be used by acknowledging the U.S. Geological Survey's Earth Resources Observation and Science (EROS) Center

or NASA's Land Processes Distributed Active Archive Center (LP DAAC) as their rightful owner and by including the following statements:

"Data available from the U.S. Geological Survey. - These data are distributed by the Land Processes Distributed Active Archive Center (LP DAAC), located at USGS/EROS, Sioux Falls, SD. http://lpdaac.usgs.gov"

Last but definitely not least, I want to thank all authors for contributing their incredible work to the community and letting me use it for this scenery. Thank you very much!!!

Finally, you may not redistribute this scenery package without explicit permission given by me.
You can PM me at https://forums.x-plane.org under the Username "Haui".