So I have a question and a report. Can we not play with both the Sure aim and commander's choice mods simultaneously? As the update files provided for both replace each other making it so you only play with one fixed mod. And about commmander's choice, I can't get it to work. I downloaded the update that you provided. Still no button to change the class. I completed a few missions thinking that maybe a completing one as one class might do the trick. No luck. I did everything as you said in the readme. I disabled all other mods besides CC. Nothing still. I'm yet to get a level up after the initial level up so if you'd like me to get that I'm willing to try.
Yes, you can. Just get the most recent version, it always includes the earlier versions. Sure Hit Chance update is marked as 2.40.3 so it includes 2.40.2 which was CC fix. Regarding CC - where are you looking for the button? It's where the screenshot for the MiniMod shows. On top of where the name of the class used to be. For Long War - it's right there when you level up for the FIRST time. For vanilla EW you are forced to pick the initial class assignment. And then the button apears. If it doesn't - exit and re-enter or scroll forth-back to the soldier.
Check also the discussion with QueridoAsno below for more insight.
Already did. When the button didn't show up I came to the comments in case there was a solution and saw the previous thread. That's how I got to know about the update. Still no button though. I'm on EW. I *am* using a mod that adds in some new heads for soldiers in the game but I don't see a reason why it would conflict with the mod (every other mod works fine). But if you'd like, I'll try once without it. And inspired by the previous thread, I'll post a video to show exactly what's happening once I'm back home :).
You can see all the details here. Only CC is on. Fresh campaign. Update is applied. tried all you said (going back into the abilities screen, scrolling back and forth etc.). Still no button to be seen. Thanks for your time and patience :)
Things to check: 1. Go to \Users\[yourusername]\Documents\My Games\XCOM - Enemy Within\XComGame\Config 2. Find XComMiniMods.ini. Look inside, search for m_bCommandersChoice=. (should be =true) 3. Find XComMutatorLoader.ini. Check if the following line is there and has no typos arrStrategicMutators=MiniModsCollection.MiniModsStrategy
If all above is in place and still doesn't work: In Mods Menu, go to "Mod Packages" (center bottom button), MiniModsCollection should be checked ON. If it is - uncheck and re-check. Save Changes, retry.
Man, I got scared for a moment, like wait, it’s not working now? The update to the file "MiniModsCollection.u - vanilla EW" version 2.40.3 fixed the issue 😂
Commander Choice still works as expected: the first time a soldier is promoted, even if you choose their class from the mission report, when you go to the barracks and select the newly promoted soldier, the button appears at the top you press it, and it changes the class each time you click. To confirm the class, you click the ability below and it asks for confirmation.
At that point, the class bonus changes and adapts to the new class everything is working fine. The user "AtoriasReborn" is making some mistake they haven't noticed yet, but Commander Choice works perfectly. We tested it for a long time. I'm still very grateful for this mini mod, it’s essential for me (づ￣ 3￣)づ
PS: If you need me to run any tests, just say the word 😁
By the way, my mods got reset too not just that, the entire game did: resolution, keybindings, everything 😅 I don’t know why, but in my case I had saved a “mod profile” in MiniMods, so I just loaded the profile and had all my favorite mods ready and configured again. Still, it’s pretty weird that the game completely resets itself after some time without playing, but oh well, it’s not a big deal and I highly doubt it’s your fault, just an observation.
@AtoriasReborn, make sure the path where you copy the updated Commander Choice file is the correct one:
C:\Program Files (x86)\Steam\steamapps\common\XCom-Enemy-Unknown\XEW\XComGame\CookedPCConsole\Mutators You need to place the updated MiniModsCollection.u file in that folder. It’s found in the “Update files” section of the downloads, under the name:
MiniModsCollection.u - vanilla EW (version 2.40.3)
Put the MiniModsCollection.u file from that download into the folder mentioned above and it will be correctly updated for XCOM EW. If you’ve done everything properly, enabled mod support, confirmed other mods using mutators work, and followed these steps, then it should work for you.
Keep in mind:
Once you change the class for the first time, it can’t be changed again.
The first class selection for a rookie doesn’t count. You must pick a class for the rookie when they level up for the first time, that’s normal. Once you’ve done that, a button will appear at the top to let you change it.
Press the button multiple times until you see the class you want.
After selecting a class, click on the ability at the bottom, whichever one it is. When you click it, the game will ask for confirmation. Accept, and at that point the class will change and the bonus will adapt to the new class (class bonuses, of course, if your rookie was a Heavy and you switch to Sniper, they will now get the Sniper aim bonus).
That’s all. It works perfectly. Just make sure you have mods working, that Commander Choice is properly updated, and that MiniMods is running correctly too.
@davoker Thanks for the great troubleshooting instructions - I'm gonna put them on the main page :) However, the issue with AtoriasReborn turned out to be a bug - the Commander's Choice required Respec Training turned on. I was not aware of that because I have it always on. It's fixed now in 2.40.3 hot fix. Moreover - the hot fix allows for class-change for reward soldiers (like Zhang) who come as "high level" soldiers.
Regarding the reset of the options - it's the engine\config\BaseGame.ini file. When you overwrite it while installing UI Mod Manager 1.5 you force the reset of the options. It's a trade-off for the lack of edit of DefaultGame.ini manually (cause the required lines come with BaseGame.ini). If you have the line in DefaultGame.ini from previous installations, you can omit copying the "\engine" folder from UI Mod Manager zip package.
I haven't played for a while, and when I loaded it, my mod settings in the manager reset. And this isn't the first time this has happened... Most mods are quick to set up, but some are a bit of a pain... SU2 isn't selected in the mod manager, but it still works. Do I need to select it in the manager and will its previous settings remain in effect?
Regarding settings' reset: UI Mod Manager (Mods Menu) has "Profiles" tab since v. 1.4 (currently MM include v.1.5). You can save your current settings in a profile. You can have numerous profiles/configurations. However, if you haven't played for a while you don't have the profile probably. The settings WILL be reset anytime you update any of the Default... ini files manually. It's because the game assumes "sth changed in the general settings" and deletes all the XCom.... ini files from \User\Documents...\Config and restores their Default... prototypes. In game it looks like "reset of the settings" (because Mods Menu stores its setting in \User\Documents...\Config)
Regarding SU2 - yeah, the switch in Mods Menu does not disable it. I should add a note about it. You need to remove the line from DefaultMutatorLoader.ini OR you can do it in-game through ModPackages. You can disable (tick off) its package or go further to "Strategy Mutators" and remove it there. After re-enabling the settings are kept (disabling the mod does not change/reset the settings).
Thanks for the answers! 1. I really don't have a profile. 2. As far as I remember, I haven't edited any config files since I finished my previous game session a few months ago. I could be wrong though... Anyway, thanks for the info, I'll pay attention to that now. 3. I don't want to delete SU 2, on the contrary, I want to continue playing it with the same settings as before. But after resetting the settings, the mod was disabled and I wanted to know how to enable it again correctly. I was afraid that if I enable it in the mod manager now, the mod settings will change. Maybe it's better not to do anything with it at all, if everything works as before now...
Settings of SU2 should be the same. The mod is turned on/off through the line in DefaultMutatorLoader.ini. The mod will auto-adjust to the new settings if you change them. For example - if you change XP thresholds for the pilots, the stats and ranks will be automatically recalculated reflecting the new settings.
I'm trying to change the INTERCEPTION_TWEAK_SCALER parameter for the SU2 mod from 1.0 to 1.5 in the mod manager, but after saving the value does not change (it remains 1.0). Although other parameters change normally. Why does this happen? By the way, the description of this parameter states that the default value is 1.5, although in reality for some reason it is set to 1.0
SU2 does not expose INTERCEPTION_TWEAK_SCALER to the Mods Menu. So I am not sure what you are actually setting? And the only setting with default 1.5 is UFO HP MULTIPLIER. Can you show a screenshot of what you are actually seeing in the Mods Menu?
I believe it's from the version for LW 1.1. This is not my config, it's by the author of LW 1.1 (Loriendal). You might have better feedback when asking about the issues regarding LW 1.1 config on LW 1.1. mod page. Also - you are on Mini Mods page and your question is about Squadron Unleashed. Anyway, try this:
1. Open file "defaultmodsprofile.ini" in the \Config folder of the game (default path is ...\steamapps\common\XCom-Enemy-Unknown\XEW\XComGame\Config)
2. Remove/delete this line: ModSettings=(ModName="SquadronUnleashed",PropertyName="INTERCEPTION_TWEAK_SCALER",PropertyPath="SquadronUnleashed.INTERCEPTION_TWEAK_SCALER",Value="1.00",ValueType=eVType_Float)
3. Check if the settings keeps being reset to 1.0 (hopefully not).
4. Come with feedback :)
[The yellow default value is the true default value - when you click Reset Defaults you will get this yellow version. Descriptions is what the author wrote, yellow is from reading the actual settings]
Yes, it really is LW 1.1. All these mods are so closely related that I don't always understand what is related to what anymore)
Unfortunately, this did not help (. The parameter is still reset to 1 after saving. Just in case, I also deleted this line in the XComModsProfile.ini file (C:\Users\Professional\Documents\My Games\XCOM Long War\XComGame\Config). But this did not help either. Resetting to default settings does indeed set the value to 1.5. But after saving, it returns to 1
Make sure you don't have any references to this setting in DefaultModsProfile.ini (and \documents\....XComModsProfile.ini). It should be only in DefaultSquadronUnleashed.ini (and users\...\XComSquadronUnleahsed.ini).
I would save all the settings to a Profile in Mods Menu. Then delete everything in \Documents\xcom....\Config\ (everything). The game will recreate the deleted files from their Default... prototypes. It will "reset" everything in Mods Menu, so you will need to restore from the saved Profile.
Apparently, I'm doing something wrong, because the result is still the same... It's interesting that another parameter value is saved (for example, 2.0). It's 1.5 that isn't saved. In general, in my defaultsquadronunleashed.ini I have set bInterceptionTweakOn=true INTERCEPTION_TWEAK_SCALER=1.5 And in the mod manager it remains 1. I hope this will work. In any case, thanks for the help!
If you want to use this with the sightlines mod how do you actually install it? This mod and that mod have a lot of files that try to overwrite each other and everytime I try to install them both I get a "package required for this mod is disabled via mod packages window. Enable option Sightlines in mod packages window to run this mod" except if I go into the mod packages window using the button at the bottom, I don't have any option to enable Sightlines. All I get in that window are 3 tabs for "Strategic Mutators", "Tactical Mutators", and "(XComGameInfo.Mods)" (that are seemingly off-center to the left since the "Strategic Mutators" button is half overlapped with the back button) but all of them just take me to another page with one item listed (different for the different tabs) and a "Register new mutator" button and that's it. If I click that button though it just sends me to a text input prompt. I read through the "DefaultMutatorLoader.ini" file that Sightlines ships with (one of the ones that this mod also has) and I've tried both adding "arrTacticalMutators="Sightlines.SightlineMutator"" to this mod's copy of it and registering "Sightlines.SightlineMutator" in the "Tactical Mutators" section of the mod packages window, but nothing has worked.
There is the little compatibility patch that this mod pack ships with so I assume they should be compatible (otherwise why would there even be a patch at all?) but for the life of me I can't figure out how you're supposed to install them together.
I assume you simply do not have the Line of Sight Indicators mod installed. You probably assume it comes with Mini Mods because you see it on the mod list, but it does not. The "Line of sight indicators" mod is not my mod and therefore is not included in the Mini Mods package. You can see it in Mod Menu because you have installed UI Mod Manager which out of courtesy of mine includes options for this mod (but only the options, not the mod itself). SOLUTION: You have to download and install LoS mod seperatly. THEN apply the compatibility fix patch.
EDIT: Do not worry about "overwriting" of the files. These are (or should be) the same files just spread accros the various packages. It must be that way because mini mods' code refers to the code of ui mod manager so the game requires the references.
JFYI: I've just spent tons of time dealing with the same issue... though I remember it was working previously... so I've uninstalled latest and re-downloaded "MiniMods (includes UIModManager v. 1.4)" - Version 2.33 -- and it's working!
So, summarizing - seems like UIModManager v. 1.5 is partially broken on vanilla EW :( You still can install UIModManager v1.4, enable LoS mod, and upgrade it to v 1.5. Though "Mod Packages" would still be broken (there are no checkboxes to enable/disable mutators).
Commander's Choice doesn't work at all in normal EW. Upon entering the barracks and selecting a soldier who is about to take his first level up (from Rookie to Squaddie), the "New Training" window pops up, forcing you to take the first skill of whatever class they are automatically assigned. I can even see the button you made (above the soldier's abilities window) briefly appear and disappear. I never get a chance to click it since the game forces you to hit "confirm" on the "New Training" window, which is unavoidable once you open the abilities screen.
I created the mod specifically on the request from EW player and I did install EW for this purpose and the tests proved reliability. Do you enter the promotion screen through barracks or through post-mission report? I admit not testing the mod with post-mission report due to missing a proper save file for tests.
Entered through barracks. Upon further examination, I may have made a mistake somewhere in installation. Some of the mini mods (example: the pre-mission picture) are working, while others are not. I originally installed UI Mod Manager from it's own page, then did the installation form there, only to realize it is also included in the zip file on this mod, where I did another (perhaps incorrect) install. Very confused process :D
I have the same problem, I installed the update but the "New Training" window appears, forcing you to take the first skill of any class that is automatically assigned
A word of explanation. The mod DOES NOT PREVENT the initial perk assignment. The game forces the soldier to be of some class after the level up. But the mod allows for a ONE TIME CHANGE of the initially assigned class. If the button for the choice is not visible immediately (after the "New Perk" pop up) scroll forth-back to the soldier or re-enter the soldier's ability screen.
Concluding - with the mod the soldier can be re-speced to a different class until his/her next level-up. For example you can go as a Heavy for a mission or two and as long as you did not level up you can re-spec to a different class.
Yes, you DO miss the most important thing. See the button above the icon? I have added a button with the name of the class. "Sniper" , "Heavy". Click the BUTTON, not the icon :)))
Consequtive clicking on the button scrolls through available classes. Confirm the choice by clicking the perk icon.
Dumb-proof instructions: Move mouse cursor over the icon. Move the cursor c.a. 2 cm to the top. The mouse cursor is now over the rectangle-shaped button with the name of the class. Click the button. Note: the mod should allow you to change class of already promoted soldiers (before the mod) as long as they are still on their first level.
This should not be happening. The mod is tracking every change of fGameSpeed attribute and ensures it to be always as set by the player. Have you tried setting the default speed to >1.0 instead of increasing it with Ctrl+?
Yes, I have changed the default speed in the defaultminimods.ini file that I copied to config. This line right: VarPath="MiniModsTactical.GAME_SPEED_TACTICAL", fMin=0.50, fMax=2.50, fStep=0.20, fDefault=2.50 Am I doing something wrong? I do have some other mods installed too using patcherGUI, but minimods doesn't utilize it either.
Oh right, in the DefaultMutatorLoader.ini I also have sightlines mod enabled, in this order: arrTacticalMutators="Sightlines.SightlineMutator" arrStrategicMutators="MiniModsCollection.MiniModsStrategy" arrTacticalMutators="MiniModsCollection.MiniModsTactical"
Maybe the order is wrong, or I can't use sightlines with minimods?
No, this is not that line. You have modified the line that controls default value for the Mods Menu (when you click "Reset Defaults" this is the value that will be set). The correct place for "hard default" is: GAME_SPEED_TACTICAL=
You simply remove or comment out the lines in DefaultMuatorLoader.ini and that's all. MiniMods do not alter any part of the existing code (well, unless you play vanilla and have applied the mutator enabling part) so when disabled they silently stop their job.
Hi SZ, hope all is well in you world. I appreciate all the hard work and effort you have put into modding this still great game! I am having an issue getting the mod manager to show on main xcom screen (on steam deck) (when u load start game etc) the mods are installed ok as when i start game i can see unit xp ammo counter etc.
I just dont have the ability to go in and tweak the mod settings to my liking. Got it running fine on PC , but trying to get this sorted on my steam deck. I checked all files and folder were lower case when copying in to right locations. as I did on the pc. but still the mods menu is not there for me.
Can you please advise a fix at all? also i was looking for your discord link and couldnt find it could you drop it here please?
I mainly want to be able to turn on enemy hit percentages and defense shield ratings both really help a lot.
Appreciate any help you can give ty. :)
EDIT: Managed to go into the ini file and manually adjust all the mods i want so I am happy! :) now the war begins once more.... Best wishes commander!
I have no option to test the mod on linux machines, including steam deck. A hint is maybe that the most recent version of ui mod manager requires putting the files one level up in the folder tree - into \xew, not into \xew\xcomgme. Have you done it this way? You can also control the mods traditionally through DefaultMiniMods.ini. All the switches and settings are there.
Thanks for the response, Managed to go into the ini file and manually adjust all the mods i want so I am happy! :) yeah I did follow the readme an put all into xew, its working fine except for the mod manager. (you need a steam deck in your life!)
now the war begins once more.... Best wishes commander!
Click "Manage Profiles" button at the top (right end), add New Profile (or select an existing one) and Save. The settings are saved in the OnlineProfileSettings (probably the Steam user profile) so should be available even after reinstalling (Manage Profiles-> Select profile -> Load).
I saved the settings in the profile, but it didn't help, unfortunately. After the settings crashed, I couldn't load them. So I thought it might be a good idea to save the files I needed, so I could just restore them to their original location if needed. Unfortunately, I don't know what exactly needs to be saved. I have a version from GOG, so all the settings should be on the disk
GOG version hacks/cheats the SteamWorksSubsystem so that is probably why the profiles will not work with GOG version (there is no reference for OnlingProfileSettings). The files that hold the setting are located in \Config user folder in ...\Documents\My Games\XCOM - Enemy Within\XComGame\Config (next to the SaveData folder). The files have "Xcom" instead of "Default" in their name. This is where the settings are being saved when you click "Save and Exit" in Mods Menu. The files of interest would be: XComModProfile.ini XComMiniMods.ini depending on the other mods might be more (like another config for the Gender Mod or Shiv Slot mod etc.)
I'm not sure I understand the installation instructions. I'm trying to play with Commander's Choice for the base game (XCom: Enemy Unknown), which the description for this mod says should work, but there are no instructions to do so. Everything is either for Long War or Enemy Within. I've tried installing all the different versions following the instructions and none of them seem to do anything. The mod manager never appears ingame. Also, the instructions say to open the file "DefaultMutatorLoader.ini" but it does not exist anywhere within the xcom files nor in the mod files. I was able to find the file because I was dumb and kept misspelling it.
Appologies, I forgot that PatcherGUI is designed for EW version and that the paths are all for XEW. Try putting the files not in \XEW\XcomGame but in \XCom-EnemyUnknown\XComGame. And the UIMODMANAGER files into \XCom-EnemyUnknown instead of into \XEW. Then try the MMXComEngine trick from Troubleshooting hints at the bottom of description. Remember to edit the files for EU so not the ones in \XEWXComGame\Comfig but one branch up, that is in Xcom-EnemyUnknown\XComGame\Config
Update: I have installed base EU and tried to make it work. No hope. What I have learned after several attempts, trying tricks and different methods - the base game refuses to load the file packages compiled for EW. Sorry. I'll update the description to "only EW/LW".
632 comments
Check also the discussion with QueridoAsno below for more insight.
You can see all the details here. Only CC is on. Fresh campaign. Update is applied. tried all you said (going back into the abilities screen, scrolling back and forth etc.). Still no button to be seen. Thanks for your time and patience :)
1. Go to \Users\[yourusername]\Documents\My Games\XCOM - Enemy Within\XComGame\Config
2. Find XComMiniMods.ini. Look inside, search for m_bCommandersChoice=. (should be =true)
3. Find XComMutatorLoader.ini. Check if the following line is there and has no typos
arrStrategicMutators=MiniModsCollection.MiniModsStrategy
If all above is in place and still doesn't work:
In Mods Menu, go to "Mod Packages" (center bottom button), MiniModsCollection should be checked ON. If it is - uncheck and re-check. Save Changes, retry.
If all this fails - report back.
Commander Choice still works as expected: the first time a soldier is promoted, even if you choose their class from the mission report, when you go to the barracks and select the newly promoted soldier, the button appears at the top you press it, and it changes the class each time you click. To confirm the class, you click the ability below and it asks for confirmation.
At that point, the class bonus changes and adapts to the new class everything is working fine. The user "AtoriasReborn" is making some mistake they haven't noticed yet, but Commander Choice works perfectly. We tested it for a long time. I'm still very grateful for this mini mod, it’s essential for me (づ￣ 3￣)づ
PS: If you need me to run any tests, just say the word 😁
By the way, my mods got reset too not just that, the entire game did: resolution, keybindings, everything 😅 I don’t know why, but in my case I had saved a “mod profile” in MiniMods, so I just loaded the profile and had all my favorite mods ready and configured again. Still, it’s pretty weird that the game completely resets itself after some time without playing, but oh well, it’s not a big deal and I highly doubt it’s your fault, just an observation.
C:\Program Files (x86)\Steam\steamapps\common\XCom-Enemy-Unknown\XEW\XComGame\CookedPCConsole\MutatorsYou need to place the updated MiniModsCollection.u file in that folder. It’s found in the “Update files” section of the downloads, under the name:
MiniModsCollection.u - vanilla EW (version 2.40.3)
Put the MiniModsCollection.u file from that download into the folder mentioned above and it will be correctly updated for XCOM EW. If you’ve done everything properly, enabled mod support, confirmed other mods using mutators work, and followed these steps, then it should work for you.
Keep in mind:
- Once you change the class for the first time, it can’t be changed again.
- The first class selection for a rookie doesn’t count. You must pick a class for the rookie when they level up for the first time, that’s normal. Once you’ve done that, a button will appear at the top to let you change it.
- Press the button multiple times until you see the class you want.
- After selecting a class, click on the ability at the bottom, whichever one it is. When you click it, the game will ask for confirmation. Accept, and at that point the class will change and the bonus will adapt to the new class (class bonuses, of course, if your rookie was a Heavy and you switch to Sniper, they will now get the Sniper aim bonus).
That’s all. It works perfectly. Just make sure you have mods working, that Commander Choice is properly updated, and that MiniMods is running correctly too.Regarding the reset of the options - it's the engine\config\BaseGame.ini file. When you overwrite it while installing UI Mod Manager 1.5 you force the reset of the options. It's a trade-off for the lack of edit of DefaultGame.ini manually (cause the required lines come with BaseGame.ini). If you have the line in DefaultGame.ini from previous installations, you can omit copying the "\engine" folder from UI Mod Manager zip package.
(☞ﾟヮﾟ)☞
And this isn't the first time this has happened... Most mods are quick to set up, but some are a bit of a pain...
SU2 isn't selected in the mod manager, but it still works.
Do I need to select it in the manager and will its previous settings remain in effect?
Regarding SU2 - yeah, the switch in Mods Menu does not disable it. I should add a note about it. You need to remove the line from DefaultMutatorLoader.ini OR you can do it in-game through ModPackages. You can disable (tick off) its package or go further to "Strategy Mutators" and remove it there. After re-enabling the settings are kept (disabling the mod does not change/reset the settings).
1. I really don't have a profile.
2. As far as I remember, I haven't edited any config files since I finished my previous game session a few months ago. I could be wrong though... Anyway, thanks for the info, I'll pay attention to that now.
3. I don't want to delete SU 2, on the contrary, I want to continue playing it with the same settings as before. But after resetting the settings, the mod was disabled and I wanted to know how to enable it again correctly. I was afraid that if I enable it in the mod manager now, the mod settings will change. Maybe it's better not to do anything with it at all, if everything works as before now...
By the way, the description of this parameter states that the default value is 1.5, although in reality for some reason it is set to 1.0
If I'm not mistaken, then this is the parameter INTERCEPTION_TWEAK_SCALER.
1. Open file "defaultmodsprofile.ini" in the \Config folder of the game (default path is ...\steamapps\common\XCom-Enemy-Unknown\XEW\XComGame\Config)
2. Remove/delete this line:
ModSettings=(ModName="SquadronUnleashed",PropertyName="INTERCEPTION_TWEAK_SCALER",PropertyPath="SquadronUnleashed.INTERCEPTION_TWEAK_SCALER",Value="1.00",ValueType=eVType_Float)
3. Check if the settings keeps being reset to 1.0 (hopefully not).
4. Come with feedback :)
[The yellow default value is the true default value - when you click Reset Defaults you will get this yellow version. Descriptions is what the author wrote, yellow is from reading the actual settings]
All these mods are so closely related that I don't always understand what is related to what anymore)
Unfortunately, this did not help (. The parameter is still reset to 1 after saving.
Just in case, I also deleted this line in the XComModsProfile.ini file (C:\Users\Professional\Documents\My Games\XCOM Long War\XComGame\Config).
But this did not help either.
Resetting to default settings does indeed set the value to 1.5. But after saving, it returns to 1
I would save all the settings to a Profile in Mods Menu. Then delete everything in \Documents\xcom....\Config\ (everything). The game will recreate the deleted files from their Default... prototypes. It will "reset" everything in Mods Menu, so you will need to restore from the saved Profile.
I cannot help anymore, sorry.
It's interesting that another parameter value is saved (for example, 2.0). It's 1.5 that isn't saved.
In general, in my defaultsquadronunleashed.ini I have set
bInterceptionTweakOn=true
INTERCEPTION_TWEAK_SCALER=1.5
And in the mod manager it remains 1.
I hope this will work.
In any case, thanks for the help!
There is the little compatibility patch that this mod pack ships with so I assume they should be compatible (otherwise why would there even be a patch at all?) but for the life of me I can't figure out how you're supposed to install them together.
SOLUTION: You have to download and install LoS mod seperatly. THEN apply the compatibility fix patch.
EDIT: Do not worry about "overwriting" of the files. These are (or should be) the same files just spread accros the various packages. It must be that way because mini mods' code refers to the code of ui mod manager so the game requires the references.
So, summarizing - seems like UIModManager v. 1.5 is partially broken on vanilla EW :(
You still can install UIModManager v1.4, enable LoS mod, and upgrade it to v 1.5. Though "Mod Packages" would still be broken (there are no checkboxes to enable/disable mutators).
Concluding - with the mod the soldier can be re-speced to a different class until his/her next level-up. For example you can go as a Heavy for a mission or two and as long as you did not level up you can re-spec to a different class.
https://youtu.be/xuEXTDlhW3c
https://staticdelivery.nexusmods.com/mods/151/images/735/735-1734914260-312975648.png
Consequtive clicking on the button scrolls through available classes. Confirm the choice by clicking the perk icon.
Dumb-proof instructions: Move mouse cursor over the icon. Move the cursor c.a. 2 cm to the top. The mouse cursor is now over the rectangle-shaped button with the name of the class. Click the button.
Note: the mod should allow you to change class of already promoted soldiers (before the mod) as long as they are still on their first level.
VarPath="MiniModsTactical.GAME_SPEED_TACTICAL", fMin=0.50, fMax=2.50, fStep=0.20, fDefault=2.50
Am I doing something wrong? I do have some other mods installed too using patcherGUI, but minimods doesn't utilize it either.
Oh right, in the DefaultMutatorLoader.ini I also have sightlines mod enabled, in this order:
arrTacticalMutators="Sightlines.SightlineMutator"
arrStrategicMutators="MiniModsCollection.MiniModsStrategy"
arrTacticalMutators="MiniModsCollection.MiniModsTactical"
Maybe the order is wrong, or I can't use sightlines with minimods?
GAME_SPEED_TACTICAL=
I just dont have the ability to go in and tweak the mod settings to my liking. Got it running fine on PC , but trying to get this sorted on my steam deck. I checked all files and folder were lower case when copying in to right locations. as I did on the pc. but still the mods menu is not there for me.
Can you please advise a fix at all? also i was looking for your discord link and couldnt find it could you drop it here please?
I mainly want to be able to turn on enemy hit percentages and defense shield ratings both really help a lot.
Appreciate any help you can give ty. :)
EDIT: Managed to go into the ini file and manually adjust all the mods i want so I am happy! :) now the war begins once more.... Best wishes commander!
https://discord.gg/nZevH7QZ
now the war begins once more.... Best wishes
commander!
XComModProfile.ini
XComMiniMods.ini
depending on the other mods might be more (like another config for the Gender Mod or Shiv Slot mod etc.)
Also, the instructions say to open the file "DefaultMutatorLoader.ini" but it does not exist anywhere within the xcom files nor in the mod files.