I think your Customize Item and Perk Charges one doesn't have any effect on Psi Grenades, even after your alleged update. I did a look through the replacement code for it and it doesn't mention the Psi Grenades in said code.
Might wanna double-check it.
EDIT: Someone on Reddit provided a fix. https://pastebin.com/1Mqpijr7
The covert extraction mod (set to six soldiers) made those mid-/end-game EXALT missions a bit more bearable, thanks! Drone Repair unfortunately didn't work under LW 1.0, though. At least not for me.
Does ITZ damage remove patch work with LW1.0? I've reinstalled on a new computer recently with LW1.0 and pretty much the same mods I was using with B15f, and the ITZ damage removal doesn't seem to work, where it did before.
Quite useful, I'm using Lightning Reflexes (which at least screws me over as well when an alien has the perk) and item charges, both work well - plus drone repair, but I haven't gotten to a point where I'd used that yet.
One thing, though. I've edited the item charges file so my Smoke & Mirrors soldiers would get 2 Ghost Grenades instead of 1, but I've since started a new game alongside and it would appear that my rookies are now able to carry two charges of AP grenades in one slot. I can refrain from using those extra charges for balance's sake, but is there some way to not have them, is it somehow related to LW using the same icon for both, or is it a screw-up on my part?
I'm pretty excited about using your mods. This post applies only (so far) to the ITEM AND PERK CHARGES mod file. However, I don't know if it was the compression technique (which is my suspicion) used for the .RAR or the actual format the files were wrote it in (which I highly doubt for the sake of the authors sanity), but either way I found the .TXT file to initially be rather un-friendly towards editing. So, I went ahead and indexed/sorted through the .TXT file and made it a little bit more approachable. I was mindful of the // comment separators and the syntax used on every line & have tested its after-the-fact for functionality (100%) to make sure I hadn't blown the whole deal; and I have not made ANY changes to the original defaults provided by the author nor made any changes in any other regard from the original content provided.
I figure on account of my limited prowess and general mod-n00b status I'd share that re-organized file with anyone who manages to find this in an attempt to make some (very, very) minor contribution to the community. So; here you go --it was easiest for me to share the file(s) from Google Drive-- I can't foresee any issues arising from that, but I'd be glad to accommodate if there are. I felt it inappropriate to simply upload the files to be hosted my own Nexus Mod account in recognition of not being the original Author, and the sake of due-recognition for his work. Well, if anyone has bothered to read all this I'm down now -- here are links to the files;
ITEM AND PERK CHARGES - Customize Charges from NexusMod 581.TXT
https://drive.google.com/open?id=0B6ZWTgmv3IdLYkxqb0ZLSVpZQUE -- this goes directly to the 'raw' .TXT file; treat it as you like from there be it copying or downloading the file from the bar at the top of the screen.
ITEM AND PERK CHARGES - 4kb (4,097 bytes) - File Name: "Customize Charges from NexusMod 581.RAR" https://drive.google.com/open?id=0B6ZWTgmv3IdLQmFoNGE5eGZsWm8 -- this goes directly to a .RAR file; which I believe Google will "open" for you to access the contained .TXT file but can be downloaded if you like from the bar at the top of the screen. (Is technically also compressed; but I was sure to check that it maintained the organization)
If you don't already know; NOTHING below the line that starts [REPLACEMENT CODE] needs to be edited or configured; regardless I still spaced the entirety of the contents cleanly for your viewing pleasures (well, mine anyway.) Only the ALIAS=BlahBlahBlah < #value > needs to be altered for desired results, though be mindful of the // comment instructions for whether or not that variable value represents the base quantity value or an additional quantity on-top-of the default base. "
Does that mean to make the mod work properly i have to do this Way, mmauser ?
You can use it whatever way you wish, mmauser's changes simply make editing the mod more user-friendly in terms of spacing, organization, et cetera. Just altering the ALIAS commands, so there's no changes in the actual function.
I'm pretty excited about using your mods. This post applies only (so far) to the ITEM AND PERK CHARGES mod file. However, I don't know if it was the compression technique (which is my suspicion) used for the .RAR or the actual format the files were wrote it in (which I highly doubt for the sake of the authors sanity), but either way I found the .TXT file to initially be rather un-friendly towards editing. So, I went ahead and indexed/sorted through the .TXT file and made it a little bit more approachable. I was mindful of the // comment separators and the syntax used on every line & have tested its after-the-fact for functionality (100%) to make sure I hadn't blown the whole deal; and I have not made ANY changes to the original defaults provided by the author nor made any changes in any other regard from the original content provided.
I figure on account of my limited prowess and general mod-n00b status I'd share that re-organized file with anyone who manages to find this in an attempt to make some (very, very) minor contribution to the community. So; here you go --it was easiest for me to share the file(s) from Google Drive-- I can't foresee any issues arising from that, but I'd be glad to accommodate if there are. I felt it inappropriate to simply upload the files to be hosted my own Nexus Mod account in recognition of not being the original Author, and the sake of due-recognition for his work. Well, if anyone has bothered to read all this I'm down now -- here are links to the files;
ITEM AND PERK CHARGES - Customize Charges from NexusMod 581.TXT
ITEM AND PERK CHARGES - 4kb (4,097 bytes) - File Name: "Customize Charges from NexusMod 581.RAR" https://drive.google.com/open?id=0B6ZWTgmv3IdLQmFoNGE5eGZsWm8 -- this goes directly to a .RAR file; which I believe Google will "open" for you to access the contained .TXT file but can be downloaded if you like from the bar at the top of the screen. (Is technically also compressed; but I was sure to check that it maintained the organization)
If you don't already know; NOTHING below the line that starts [REPLACEMENT CODE] needs to be edited or configured; regardless I still spaced the entirety of the contents cleanly for your viewing pleasures (well, mine anyway.) Only the ALIAS=BlahBlahBlah < #value > needs to be altered for desired results, though be mindful of the // comment instructions for whether or not that variable value represents the base quantity value or an additional quantity on-top-of the default base.
Lastly, the files can only be viewed, commented on or downloaded. This should suffice to preserve their integrity.
Many Thanks to Vazeron1 for your efforts and time!
52 comments
Might wanna double-check it.
EDIT: Someone on Reddit provided a fix.
https://pastebin.com/1Mqpijr7
One thing, though. I've edited the item charges file so my Smoke & Mirrors soldiers would get 2 Ghost Grenades instead of 1, but I've since started a new game alongside and it would appear that my rookies are now able to carry two charges of AP grenades in one slot. I can refrain from using those extra charges for balance's sake, but is there some way to not have them, is it somehow related to LW using the same icon for both, or is it a screw-up on my part?
I'd just like to know if there was a way to have Packmaster increase the number of Ghost Grenades you had.
"Just because;
I'm pretty excited about using your mods. This post applies only (so far) to the ITEM AND PERK CHARGES mod file. However, I don't know if it was the compression technique (which is my suspicion) used for the .RAR or the actual format the files were wrote it in (which I highly doubt for the sake of the authors sanity), but either way I found the .TXT file to initially be rather un-friendly towards editing. So, I went ahead and indexed/sorted through the .TXT file and made it a little bit more approachable. I was mindful of the // comment separators and the syntax used on every line & have tested its after-the-fact for functionality (100%) to make sure I hadn't blown the whole deal; and I have not made ANY changes to the original defaults provided by the author nor made any changes in any other regard from the original content provided.
I figure on account of my limited prowess and general mod-n00b status I'd share that re-organized file with anyone who manages to find this in an attempt to make some (very, very) minor contribution to the community. So; here you go --it was easiest for me to share the file(s) from Google Drive-- I can't foresee any issues arising from that, but I'd be glad to accommodate if there are. I felt it inappropriate to simply upload the files to be hosted my own Nexus Mod account in recognition of not being the original Author, and the sake of due-recognition for his work. Well, if anyone has bothered to read all this I'm down now -- here are links to the files;
ITEM AND PERK CHARGES - Customize Charges from NexusMod 581.TXT
https://drive.google.com/open?id=0B6ZWTgmv3IdLYkxqb0ZLSVpZQUE -- this goes directly to the 'raw' .TXT file; treat it as you like from there be it copying or downloading the file from the bar at the top of the screen.
ITEM AND PERK CHARGES - 4kb (4,097 bytes) - File Name: "Customize Charges from NexusMod 581.RAR"
https://drive.google.com/open?id=0B6ZWTgmv3IdLQmFoNGE5eGZsWm8 -- this goes directly to a .RAR file; which I believe Google will "open" for you to access the contained .TXT file but can be downloaded if you like from the bar at the top of the screen. (Is technically also compressed; but I was sure to check that it maintained the organization)
If you don't already know; NOTHING below the line that starts [REPLACEMENT CODE] needs to be edited or configured; regardless I still spaced the entirety of the contents cleanly for your viewing pleasures (well, mine anyway.) Only the ALIAS=BlahBlahBlah < #value > needs to be altered for desired results, though be mindful of the // comment instructions for whether or not that variable value represents the base quantity value or an additional quantity on-top-of the default base. "
Does that mean to make the mod work properly i have to do this Way, mmauser ?
I'm pretty excited about using your mods. This post applies only (so far) to the ITEM AND PERK CHARGES mod file. However, I don't know if it was the compression technique (which is my suspicion) used for the .RAR or the actual format the files were wrote it in (which I highly doubt for the sake of the authors sanity), but either way I found the .TXT file to initially be rather un-friendly towards editing. So, I went ahead and indexed/sorted through the .TXT file and made it a little bit more approachable. I was mindful of the // comment separators and the syntax used on every line & have tested its after-the-fact for functionality (100%) to make sure I hadn't blown the whole deal; and I have not made ANY changes to the original defaults provided by the author nor made any changes in any other regard from the original content provided.
I figure on account of my limited prowess and general mod-n00b status I'd share that re-organized file with anyone who manages to find this in an attempt to make some (very, very) minor contribution to the community. So; here you go --it was easiest for me to share the file(s) from Google Drive-- I can't foresee any issues arising from that, but I'd be glad to accommodate if there are. I felt it inappropriate to simply upload the files to be hosted my own Nexus Mod account in recognition of not being the original Author, and the sake of due-recognition for his work. Well, if anyone has bothered to read all this I'm down now -- here are links to the files;
ITEM AND PERK CHARGES - Customize Charges from NexusMod 581.TXT
https://drive.google.com/open?id=0B6ZWTgmv3IdLYkxqb0ZLSVpZQUE -- this goes directly to the 'raw' .TXT file; treat it as you like from there be it copying or downloading the file from the bar at the top of the screen.
ITEM AND PERK CHARGES - 4kb (4,097 bytes) - File Name: "Customize Charges from NexusMod 581.RAR"
https://drive.google.com/open?id=0B6ZWTgmv3IdLQmFoNGE5eGZsWm8 -- this goes directly to a .RAR file; which I believe Google will "open" for you to access the contained .TXT file but can be downloaded if you like from the bar at the top of the screen. (Is technically also compressed; but I was sure to check that it maintained the organization)
If you don't already know; NOTHING below the line that starts [REPLACEMENT CODE] needs to be edited or configured; regardless I still spaced the entirety of the contents cleanly for your viewing pleasures (well, mine anyway.) Only the ALIAS=BlahBlahBlah < #value > needs to be altered for desired results, though be mindful of the // comment instructions for whether or not that variable value represents the base quantity value or an additional quantity on-top-of the default base.
Lastly, the files can only be viewed, commented on or downloaded. This should suffice to preserve their integrity.
Many Thanks to Vazeron1 for your efforts and time!