I have this downloaded through Creations at the moment and I have never gotten it to work. Does it need to be at the top of my load order along with other patches? I've tried having multi brigs (OwlTech along with 2 SPE) and it just picked up the OwlTech. I took that out and went down to one SPE brig and sometimes the terminal shows literally nothing, and sometimes it shows 0's. I've uninstalled and reinstalled SPE, UB, and Non Lethal Frame. Any ideas?
All patches need to bo place at the bottom of your load order not on top. They must be placed after their master mods. If the terminal shows nothing, it's a bug from UB.
Well that would explain it, I have a lot of mods so I'll have to reorganize. Thank you! I was going off of this Reddit post, which appears I got it backwards.
I'm getting vastly inconsistent number of beds on different loads of the game.
I have four (4x) Stroud Premium Brigs. 3x aft and 1xfore (or possibly the other way around) 3 open towards the cockpit; one opens the same way as the cockpit.
On one load I get 56beds, another was 42. I dont even understand how it can arrives at 42 when it is not divisible by 4...
I used to have the creations version of UB, and NLF, but ended up dropping them out in preference of Nexus as I have a lot more control over whether to update it, and how I roll it back if it breaks (like it did in January 2025), so this is my one-stop shop, but as above, I still get inconsistent number of beds.
Will update this post with numbers as I notice different values going forwards.
This is the first time I see such a bug. Usefull SPE Birhs now have 10 beds, so you should have only 40 beds. I'll see if the bug is on my side. Btw, you should update the patch to the 1.2.1, I fixed a bug with the UB terminal not being removed by ladders x)
Of course you did. Korodic said on it's mod page that you had to sell all you prisoners before updating... This is not something with the SPE patch but something with UB itself.
It won't solve their problem ^^ the problem comes from the UB update. To get their prisoners back, they need to reload a previous save AND use an older version of UB
The problem got patched in the last UB update, that's why there is a new update of the patch 😁 You can now update SPExUB patch to have usefull SPE brigs x)
Great Mod. I added the 2X1 Brig (fore) . The brig terminal only shows 6 beds. I believe it should be 12. I updated the SPE mod (1.2) first and the Useful brig patch after it but together in the same session( that might be the problem) In the load order I have the SPE 1.2 ahead of this brig patch. any ideas? thanks
I mean, if you have only one module, then there is no problem, but if you have two brigs, then there is a problem. During my testing, when I had two brigs, I always had 12 beds in the terminal, and 6 with one module, as expected.
Then there's no problem ^^ upper beds are not taken into account (as in vanilla habs). They can't be used by NPCs, so there's no reason to consider them as real beds.
I think the confusion might be coming from when we use the Vanilla Stroud 2x2 Brig, even though there's only 2 cells, each cell will have 1 lower bed and 1 upper bed. But Useful Brig would count them as 4 beds and we can send 4 NPC into the brig as prisoners, and they would actually sleep on the top bed.
So I think it's understandable if the commenter thought that the same logic would apply, that having 1 lower and 1 upper bed is counted as 2 beds like it's coming from Useful brig, rather than the fact the game only considers the lower bed as the actual usable one.
31 comments
Thanks for all your effort.
Cheers!
Nope, not necessary, the current version of the patch is compatible with the SPE V2.0.0 👍
I have four (4x) Stroud Premium Brigs. 3x aft and 1xfore (or possibly the other way around) 3 open towards the cockpit; one opens the same way as the cockpit.
On one load I get 56beds, another was 42. I dont even understand how it can arrives at 42 when it is not divisible by 4...
I used to have the creations version of UB, and NLF, but ended up dropping them out in preference of Nexus as I have a lot more control over whether to update it, and how I roll it back if it breaks (like it did in January 2025), so this is my one-stop shop, but as above, I still get inconsistent number of beds.
Will update this post with numbers as I notice different values going forwards.
Not sure where the problem lies.
This is the first time I see such a bug. Usefull SPE Birhs now have 10 beds, so you should have only 40 beds. I'll see if the bug is on my side.
Btw, you should update the patch to the 1.2.1, I fixed a bug with the UB terminal not being removed by ladders x)
I will look at it x)
This is not something with the SPE patch but something with UB itself.
You can now update SPExUB patch to have usefull SPE brigs x)
thanks again.
I added the 2X1 Brig (fore) . The brig terminal only shows 6 beds. I believe it should be 12.
I updated the SPE mod (1.2) first and the Useful brig patch after it but together in the same session( that might be the problem) In the load order I have the SPE 1.2 ahead of this brig patch. any ideas?
thanks
and thanks for the quick response!
So I think it's understandable if the commenter thought that the same logic would apply, that having 1 lower and 1 upper bed is counted as 2 beds like it's coming from Useful brig, rather than the fact the game only considers the lower bed as the actual usable one.