Hi, anyone who experiences combability problem, since I have not updated this mod for years, and I saw in the bugs report that some people have got them to work, please respond to this post or dm me on how to solve it so I can modify the files and upload a newer version, and also write down a new installation guide.
I GOT THIS MOD TO WORK!!! It took me hours and I think this is a solid way to get it done. Get ready, there's a lot of steps.
1. Download this mod (Both WizardRomanceableSpriteChaekal-Rizum and WizardPortrait Chaekal) and everything needed, install everything else before getting to this one. (Depending on what you want to do, you may want Stardew Valley Expanded, Portraiture and I'm guessing definitely Romanceable Rasmodius. I have these and I know this works with them, but I haven't been able to test SVE portraits yet.)
2. Unzip both files, and go to the game's main directory and then to Content, which will most likely be located at C:\Program Files (x86)\Steam\steamapps\common\Stardew Valley\Content 3. Go to the Characters folder and backup the Wizard.xnb file, this is very important. You only need to drag it onto your desktop or copy it somewhere, I suggest renaming this one to "Wizard Sprites" to distinguish it from the next step's file. Open the WizardRomanceableSpriteChaekal-Rizum folder and drag and drop the the new Wizard.xnb file from that into Characters folder, replacing the original. 4. Go back to the Content folder, then go into Portraits. Again, backup the Wizard.xnb file that's in there then take the Wizard.xnb file from the WizardPortrait Chaekal folder and replace the original.
That should be all you need to get him in your main game, here's the steps for getting it to work with my setup.
For Romanceable Rasmodius: To keep it easy on you, I've already unpacked the sprite sheet in this mod, you can download it here: https://imgur.com/a/4gjI0Cm Or, if you want you can unpack the .xnb file yourself! Here's a tutorial: https://youtu.be/HYyiHE9BRMM?si=oEi-eW-aGtR_wNNy 1. Download the sprites (making sure it's a PNG) and name it VanillaWizard. 2. Go to your mods folder and to [CP] Romanceable Rasmodius SVE, then to assets, then Characters. Most likely the directory is C:\Program Files (x86)\Steam\steamapps\common\Stardew Valley\Mods\[CP] Romanceable Rasmodius SVE\assets\Characters 3. Backup the VanillaWizard.PNG that's in the folder already, then drag and drop the new sprites in there. 4. Either start up the game and enter the General Config Menu if you have that mod installed and go to the RomRas option there, or edit the config.json in the [CP] Romanceable Rasmodius SVE folder in your mods.
Portrait Mode should be at "9", Sprite option should be set to "vanilla", and sleeping sprite and pink hair options should be disabled if you don't have Stardew Valley Expanded and the compatible sprites for it which are linked in the sticky locked post here. For SVE: 1. Download the mod in the stickyd post here and follow the instructions for it. That should be all!
For Portraiture: Now, I actually don't know if this really worked, but the folder that Portraiture says I'm using seems to be this one so... Here's those instructions. 1. Download this: https://www.nexusmods.com/stardewvalley/mods/10517?tab=description 2. Don't follow the instructions for that one, it would replace his sprite sheets instead of his portrait. Instead, go to Portraiture in your mods folder then to Portraits. 3. Make a new folder either called Magnus or Wizard (I think Wizard is for base game and Magnus is for SVE? Wizard is probably the safest to go with.) 4. Put the portrait sheet in there and name it either Magnus or Wizard, doesn't matter what your folder name is (at least in my case.)
You should be done!! If you're having problems, check to make sure no other mods are affecting the wizard, in my case Diverse Stardew Valley caused a hiccup (disable the option for him) and Seasonal Cute Characters, even the SVE version made his sprites change. Go in and delete or move any Wizard and Magnus folders from mods that affect his sprites.
I hope this helped, this mod is gorgeous and I'm so happy it finally works ;v;
Hey! I've made an edited version of this portrait and was wondering if I could get permission to share it here on Nexus? I will ofc give credit and link to the original artwork.
Hello Rizumu! I just wanted to say thank you so much for this mod. I think the art is beautiful and still looks close enough to the original Stardew to fit in. I love the wizard now that he looks like a hot anime dude.
hi sora, if u haven't gotten it to work yet, have u tried changing the sprite to custom in the romanceable rasmodius mod?
if not, go to the romanceable rasmodius folder and open config with notepad, when open, change the word "vanilla" to "custom" and then save. it should work after that :)
I did this and it works (except the portrait since I'm trying to use the gigi one) but every time I lock on the edges of his tower and I can't get into the right tower, can you help me?
You can fix this by going into the content file and changing the "load" command to "EditImage" as shown below.
I recommend combining the portrait and sprite into one mod, creating an assets/characters and assets/portraits folder to store the respective xnb files.
?Hi so the sprite works for me but the protrait doesnt. I tried everything I know but it just doesnt show up and I cant use the SVE version of this since I dont play with SVE. anyone know a solution?
ik this is old but when i kiss him it turns into black square, i have seen the SVE convert ver but I dont plan on using SVE ver, is there an alternate way ?
edit : i fixed it ! I had to edit it manually so download this (https://imgur.com/7NmqPqG) and re-name the image to "NewWizard" then put it in [CP] Romanceable Rasmodius\assets\sprites this hopefully should fix it ! <3
109 comments
Please check this version for those who uses SVE Chaekal and Rizum's Wizard Sprite - SVE at Stardew Valley Nexus - Mods and community (nexusmods.com).
It took me hours and I think this is a solid way to get it done. Get ready, there's a lot of steps.
1. Download this mod (Both WizardRomanceableSpriteChaekal-Rizum and WizardPortrait Chaekal) and everything needed, install everything else before getting to this one. (Depending on what you want to do, you may want Stardew Valley Expanded, Portraiture and I'm guessing definitely Romanceable Rasmodius. I have these and I know this works with them, but I haven't been able to test SVE portraits yet.)
2. Unzip both files, and go to the game's main directory and then to Content, which will most likely be located at C:\Program Files (x86)\Steam\steamapps\common\Stardew Valley\Content
3. Go to the Characters folder and backup the Wizard.xnb file, this is very important. You only need to drag it onto your desktop or copy it somewhere, I suggest renaming this one to "Wizard Sprites" to distinguish it from the next step's file.
Open the WizardRomanceableSpriteChaekal-Rizum folder and drag and drop the the new Wizard.xnb file from that into Characters folder, replacing the original.
4. Go back to the Content folder, then go into Portraits. Again, backup the Wizard.xnb file that's in there then take the Wizard.xnb file from the WizardPortrait Chaekal folder and replace the original.
That should be all you need to get him in your main game, here's the steps for getting it to work with my setup.
For Romanceable Rasmodius:
To keep it easy on you, I've already unpacked the sprite sheet in this mod, you can download it here: https://imgur.com/a/4gjI0Cm
Or, if you want you can unpack the .xnb file yourself! Here's a tutorial: https://youtu.be/HYyiHE9BRMM?si=oEi-eW-aGtR_wNNy
1. Download the sprites (making sure it's a PNG) and name it VanillaWizard.
2. Go to your mods folder and to [CP] Romanceable Rasmodius SVE, then to assets, then Characters. Most likely the directory is C:\Program Files (x86)\Steam\steamapps\common\Stardew Valley\Mods\[CP] Romanceable Rasmodius SVE\assets\Characters
3. Backup the VanillaWizard.PNG that's in the folder already, then drag and drop the new sprites in there.
4. Either start up the game and enter the General Config Menu if you have that mod installed and go to the RomRas option there, or edit the config.json in the [CP] Romanceable Rasmodius SVE folder in your mods.
Portrait Mode should be at "9", Sprite option should be set to "vanilla", and sleeping sprite and pink hair options should be disabled if you don't have Stardew Valley Expanded and the compatible sprites for it which are linked in the sticky locked post here.
For SVE:
1. Download the mod in the stickyd post here and follow the instructions for it. That should be all!
For Portraiture:
Now, I actually don't know if this really worked, but the folder that Portraiture says I'm using seems to be this one so... Here's those instructions.
1. Download this: https://www.nexusmods.com/stardewvalley/mods/10517?tab=description
2. Don't follow the instructions for that one, it would replace his sprite sheets instead of his portrait. Instead, go to Portraiture in your mods folder then to Portraits.
3. Make a new folder either called Magnus or Wizard (I think Wizard is for base game and Magnus is for SVE? Wizard is probably the safest to go with.)
4. Put the portrait sheet in there and name it either Magnus or Wizard, doesn't matter what your folder name is (at least in my case.)
You should be done!!
If you're having problems, check to make sure no other mods are affecting the wizard, in my case Diverse Stardew Valley caused a hiccup (disable the option for him) and Seasonal Cute Characters, even the SVE version made his sprites change. Go in and delete or move any Wizard and Magnus folders from mods that affect his sprites.
I hope this helped, this mod is gorgeous and I'm so happy it finally works ;v;
really love it TUT
hope u will fix it soon..
if not, go to the romanceable rasmodius folder and open config with notepad, when open, change the word "vanilla" to "custom" and then save. it should work after that :)
I recommend combining the portrait and sprite into one mod, creating an assets/characters and assets/portraits folder to store the respective xnb files.
edit : i fixed it ! I had to edit it manually so download this (https://imgur.com/7NmqPqG) and re-name the image to "NewWizard" then put it in [CP] Romanceable Rasmodius\assets\sprites this hopefully should fix it ! <3