File information

Last updated

Original upload

Created by

ICFur

Uploaded by

ICFur

Virus scan

Safe to use

36 comments

  1. ICFur
    ICFur
    • premium
    • 267 kudos
    Locked
    Sticky
    I have posted a functionally complete version of the Complex Parallax Test over on my Patreon page. This one includes all of the reach tree meshes and will work with Happy Little Trees out of the box. I've also included some optional mesh files to work with Majestic Mountains Complex Materials if you're using that mod too.

    These are Free to the Public (aka not pay-walled). I still need to make some 2k versions (everything is in 4k at the moment) and fix a visual issue on one mesh before I post these to NexusMods.

    Once I finish polishing up these, I'm going to tackle making some snowy variants to replace the reach trees in cold areas and also add Seasons of Skyrim support.

  2. ni1by2
    ni1by2
    • premium
    • 6 kudos
    these are so great, but I had to remove them because of the lack of seasons support. Really jarring when you go to the Reach in winter and these trees, unlike everything else, look like it's still spring!
  3. KingJamesIII
    KingJamesIII
    • member
    • 11 kudos
    WHAT REACH GROUND TEX WAS USED IN 2ND PIC?!
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      Oh boy, it's been a while since I took that picture and I cycle landscape textures a lot. I thinking it was either The Ominibus or Majestic Landscapes that I was using at the time.
  4. usaid12345
    usaid12345
    • supporter
    • 19 kudos
    perfect addition to happy little trees. Thank you so much for fixing vanilla issue as well. Appreciate it
  5. m1sf1t711
    m1sf1t711
    • premium
    • 11 kudos
    Hi

    Are you still planning to add Seasons of Skyrim support? In particular I use Turn of the Seasons with it's Happy Little Trees patch for the seasonal changes to reach trees but I would really love to be able to overwrite Happy Little Trees with your mod to lose the floating hanging moss.
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      I am. I have been working on some snowy meshes and textures for these. I'm also trying to find all of the trees in areas that are normally snowy so I can replace the green trees with snow covered ones in those areas.
    2. m1sf1t711
      m1sf1t711
      • premium
      • 11 kudos
      Oh that sounds excellent. Very much looking forward to seeing your results
    3. DFLeftovers
      DFLeftovers
      • supporter
      • 0 kudos
      hi, any update on this?
    4. ICFur
      ICFur
      • premium
      • 267 kudos
      I got sidetracked with some other mods and this got put on the back burner. I recently injured my knee and I can't get to my main PC easily because of stairs. If I have the files for this on my laptop, I'll take a look at this again and see what I can do.
  6. Dradaki
    Dradaki
    • supporter
    • 4 kudos
    If anyone has issues using this with Happy Little Trees (even with FOMOD), what I did to solve one of the trees not being replaced (reach cliff I think), I copied the nif files from this mod and pasted them in the "aHappyLittleTreeMod" folder. That seemed to have solved the issue
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      I thought I set the FOMOD to do that automatically if you check the Happy Little Trees option, but I'll double check to see if something is not setup correctly.
    2. Dradaki
      Dradaki
      • supporter
      • 4 kudos
      I very well may have done something wrong with installation,been known to happen from time to time lol
  7. RyanhMODs
    RyanhMODs
    • supporter
    • 3 kudos
    How might I get this to be compatible with Fabled Forests?
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      It looks like Fabled Forests uses the same file path for reach trees as Happy Little Trees, so if you use the Happy Little Trees option in the FOMOD for this mod it should work. You just need to make sure my mod loads after Fabled Trees.
  8. arghTease
    arghTease
    • premium
    • 214 kudos
    Thank you!  great solution to those "ugly azz" trees.  😁
    kudos 
  9. m1sf1t711
    m1sf1t711
    • premium
    • 11 kudos
    These trees look really good 

    I just wondered how they would work with my combination of Happy Little Trees, Seasons of Skyrim, Shrubs of Snow and Turn of the Seasons? I know that Turn of the Seasons has a patch for Happy Little Trees which I think makes HLT use the TotS meshes all year round so I guess this would need a patch for TotS as well?
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      Looking at Turn of the Season (TotS), it appears that you would most likely see the Happy Little Trees (HLT) variants of the reach trees in every season except winter. However, if you're up to modifying a few ini files in Notepad, it's fairly easy to fix.

      Open the Turn of the Seasons mod folder and find the Seasons folder. Inside of the Seasons folder there will be four ini files for each of the seasons. Remove/delete the following lines from the [Trees] section in three of the ini files, then save your changes and you'll be good to go.

      Turn of the Seasons_AUT.ini
      ;TreeReachTree01|TreeReachTree01Autumn
      0xB8A73~Skyrim.esm|0x811~Turn of the Seasons.esp

      ;TreeReachTree02|TreeReachTree02Autumn
      0xB8A74~Skyrim.esm|0x812~Turn of the Seasons.esp

      Turn of the Seasons_SPR.ini
      ;TreeReachTree01|TreeReachTree01Spring
      0xB8A73~Skyrim.esm|0x817~Turn of the Seasons.esp

      ;TreeReachTree02|TreeReachTree02Spring
      0xB8A74~Skyrim.esm|0x818~Turn of the Seasons.esp

      Turn of the Seasons_SUM.ini
      ;TreeReachTree01|TreeReachTree01Spring
      0xB8A73~Skyrim.esm|0x817~Turn of the Seasons.esp

      ;TreeReachTree02|TreeReachTree02Spring
      0xB8A74~Skyrim.esm|0x818~Turn of the Seasons.esp

      I am working on a winter version of these too. I just haven't gotten the frosty texture on the needles quite the way I want it yet. When I get that done, I'll make these compatible with Seasons of Skyrim, and I also plan to find the trees in cold areas and swap them for the snowy version so they don't stand out so much.
    2. m1sf1t711
      m1sf1t711
      • premium
      • 11 kudos
      Ah thank you! Yes I was thinking of taking the trees out of the inis so your confirming that as an option is really encouraging.  I also love your plans for snowy and seasons compatibility with your mod! I am definitely tracking in anticipation :)

      Thank you so much for the advice :)
  10. Kredje
    Kredje
    • supporter
    • 16 kudos
    Hello, one of your tree meshes (reachtreestump01.nif) uses texture ICFTreeReachAddOn01.dds with wrong normal map icftreepineforestaddon01_n.dds instead of ICFTreeReachAddOn01_n.dds
    Just got warning from dyndolod about that
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      Edit:
      Fixed in version 1.02. I also made a modification to the bark texture so there aren't so many dark gashes in the tree trunk.

      Original Post:
      I probably copy pasted the file name incorrectly for the normal texture when I was working on the mesh. I'll work on fixing that.
  11. JosieJeen
    JosieJeen
    • supporter
    • 0 kudos
    Hello! I recently saw how amazing your reach tree replacer looked like and was wondering if you'd give permission for a Xbox port of this mod? I assure you that you would be credited in the description and will have a link back to this nexus mod. I would love to have this mod on Xbox! Hope to heard back from you!!!

    -By JosieJeen
    1. ICFur
      ICFur
      • premium
      • 267 kudos
      Sure go ahead. Xbox users deserve nice trees too.
    2. andfive
      andfive
      • member
      • 3 kudos
      Hi kiara,

      i fulfilled the xbox port. Thank you again for allowing us xbox players to use your beautiful tree replacer.
      You can find the xbox port here: https://mods.bethesda.net/en/skyrim/mod-detail/4331165

      if you would like to have anything changed, please let me know! :)

      Greetings, Andy