By popular request this is the preset used in the screen shots of my various bodyslide armor mods. Included are instructions on how to get everything looking right and the same. The point of this mod was for those that really liked the look, didn't want to mess with too many slider values, and just rather do the install and call it done.
Enjoy guys!
EDIT I had my preset originally based upon one of R246 presets from his mod. I took his first preset and changed a few slider values after that. His first Breton race preset also used a non-vanilla nose and cheeks that was included in his mod. R246 decided to remove his mods from the nexus which made my preset not look right because the nose it was referencing was missing. So I switched the closest approximated vanilla nose instead. Hence the revision number on this mod. The nose and cheeks were pulled from ECE (Enhanced Character Edit) and I may look into doing something similar.
by default there is 10 presets for the female breton. This mod adds an 11th. Not sure how you are ending up with 9. Just double checked with a clean game with no mods and it had 10. Added mine and got 11. So something else you have installed is changing up the presets you have available is all I can say.
If you have the time and harddrive space, try moving your game into a dummy folder and reinstall the game fresh. With no mods on a fresh game check how many presets you have. Then try just adding my mod. If all that works and you have 10 presets with vanilla, and 11 with my mod, then the next thing to do is start installing mods one at a time to see if it affects the presets. It will take awhile, but that is about the only way I can think to identify the issue.
Hi, i did try the suggestion you said and managed to get 10 vanilla its was strange really because i cannot replicate the only 9 error now, and after all that messing about i still can't get this mod to work, with or with it.. it stays at 10 now, so i have no clue whats going on, i may try a full re-download of skyrim if it annoys me enough but that might end up borking everything so no idea unless you can move it just for me? lol
I have the presets from this mod but only messes with like 1 - 4 so i know it's not this..right? https://rd.nexusmods.com/skyrimspecialedition/mods/7945
correct, the R246 presets replace the first 4. Still, the preset I have is very close to the first one. You can use it and change the weight, colors, makeup, hair, and eyes around until you match what my preset looks like.
How do you install the Demoniac textures for SSE? I have tried so much, followed so many tutorials but none apply to Demoniac, and I'm getting nowhere. I am relatively new to this so if you could help me out, that would help alot, thanks.
Give Feedback
13 comments
Enjoy guys!
EDIT
I had my preset originally based upon one of R246 presets from his mod. I took his first preset and changed a few slider values after that. His first Breton race preset also used a non-vanilla nose and cheeks that was included in his mod. R246 decided to remove his mods from the nexus which made my preset not look right because the nose it was referencing was missing. So I switched the closest approximated vanilla nose instead. Hence the revision number on this mod. The nose and cheeks were pulled from ECE (Enhanced Character Edit) and I may look into doing something similar.
I have the presets from this mod but only messes with like 1 - 4 so i know it's not this..right? https://rd.nexusmods.com/skyrimspecialedition/mods/7945
Thanks for the help.