Please first read FAQ before do the same question.
Q. I updated from old PHP to Version2x, but the character does not posing and remains in idle. A. From v2.0 is not compatible with the original Poser Hotkeys or old Poser Hotkeys Plus(v1) and old save data. If you keep using old PHP's save data as it is, character will be idle. Please create the clean save or do new game.
Q. MCM is not showing. If do not show the MCM after waiting a few minutes, please try change the load order of esp. If it still does not showing, please enter "setstage ski_configmanagerinstance 1" from the console.
Q. I installed all required Mods but the poser presets does not displayed on MCM and menu. or I get an error that Mfg Console is not installed at startup. A.If you installed this Mods and after installing Campfire or Sexlab etc., it will be overwritten by old PapyrusUtil included in those Mods and will not function properly. So delete old PapyrusUtil included in installed mods or overwrite to new PapyrusUtil.
Q. Can not get strength of expression other than Dialogue Anger. This is a Mfg Console bug in "MfgConsoleFunc.pex". But I fixed mfg script for this problem, so that you can get the strength of all facial expressions. However, If you install PHP and after installing Sexlab or Osex or etc. will overwrite the fixed mfg script to original mfg script with bug. Please delete the original "MfgConsoleFunc.pex" included in the after installed Mods or overwrite to my fixed "MfgConsoleFunc.pex" of this PHP.
Q. How many poser Mods can registration? A. this mod is no limit. However, FNIS has an upper limit on the number of registrations, so the maximum number of FNIS registrations is the upper limit.
Q.FootIK OFF Spell is necessary? A. It is not necessary because automatically disable FootIK when posing.
Q. Where is the created face presets? Also can I publish the my face presets to Nexus? A. Version2 Face presets are saved in "Data/SKSE/Plugins/Poserhotkeys/FaceData" And you can publish your created face presets to Nexus.
Q.I downloaded optional presets, but not getting any poses showing. A.If the downloaded preset does not work, it is most users make installation mistakes. Please check that the downloaded preset is correctly installed in the following directory. "Data/SKSE/Plugins/PoserHotKeys/PoserData" And if using MO, make sure there are no older presets in the overwrite folder.
Many of the reasons it doesn't work are due to problems with the way users install it.
I'm often asked by nexus users to update the presets for each pose mod, but it's difficult in time to accommodate weekly pose mods like GS Poses. So I developed an editor that allows users to update their own presets.
This editor will allow you to add pose names and categorize to existing PHP presets and presets generated from PoserDataGen. Of course, edit your favorite preset, so you can create your own poser pack.
The editing operation is very easy.
1. Create a new preset or load an existing preset (JSON). Existing presets can be found at "Data\SKSE\Plugins\PoserHotKeys\PoserData". (If you are using Mod Organizer, register "PoserDataEdit.exe" and execute it from MO)
2. If you want to create a new preset, open FNIS_MODNAME_LIST.txt in the pose mod you want to use. Create a new file from the editor, add as many poses (rows) as you need, and enter the AnimEvent defined in the "AnimEvent" column.
For "PoseName", enter the pose name to be displayed in PHP's poser menu. (Double-byte characters can also be used) (If "PoseName" is empty, "AnimEvent" will be displayed as the pose name)
3. Saving the preset will update the PHP poser menu. (Presets must be saved to "Data\SKSE\Plugins\PoserHotKeys\PoserData")
This tool can be download from the Main file. Good luck.
Everything is working perfectly for me besides one thing: animated speed slider is not working, literally have no idea where that could be coming from so if anyone has any ideas thanks in advance
I Installed this mod, and got the MFG Fix. it shows me opparco mfg command for SSE and Mfg Fix both are in conflict. funfact i did not Install opparco mfg command for SSE.
I Deleted Mfg Fix and Tryed opparco mfg command for SSE same here. Mfg Fix and opparco mfg command for SSE are in conflict but Mfg Fix was already gone can someone help x.x
I have a little problem, when I try to use the keybinds it doesn't work, I changed the keybinds and I even enable the option to use them but nothing, any help please?
I'm having an odd problem. My MCM is not showing any poser hotkey mod. I have tried the most current Poser Hotkey Plus, the previous version, and the most current Poser Hotkeys. It does not matter how long I wait, and the suggested console command does not resolve the issue. Re-downloading the mod also did not help. I use Vortex for mod management, and I have set this mod to the highest priority, so it should not be a file conflict. My mod list quite large, but it is not over capacity. If anyone has any suggestions, or if I just need to give up on it, please let me know.
This mod looks very well put together and honestly a lot simpler than the old fashioned rings.
My problem may not be unique but I would still like to see if anyone has any guidance. I cannot, for the life of me, get this to register in MCM. I already had the vast majority of required mods installed due to other animation/pose mods I was using. I am guessing it might be a load order issue? I have tried putting it near the top (underneath the required mods of course) and even near the bottom but many minutes of waiting yield no menu. I even used the console command that mille posted in the sticky but that only registers the MCM menus that I already have present. Maybe I'm just not being patient enough waiting in game.
the mod work perfectly fine, but once you have sexlab on your game, when i tick fov mode with free camera, i activated the animation, then the fov become weird, like super weird, so how to fix that weird fov, press end to end the animation, then i press tab, because thats where fov always reset\
ive this both on le and se skyrim, so i an guarantee the mod worked perfect if you dont install sexlab, the thing is i cant disable sexlab like i disable cloth armor, this is animation mod, so you have to uninstall sexlab v1.62
215 comments
Q. I updated from old PHP to Version2x, but the character does not posing and remains in idle.
A. From v2.0 is not compatible with the original Poser Hotkeys or old Poser Hotkeys Plus(v1) and old save data.
If you keep using old PHP's save data as it is, character will be idle.
Please create the clean save or do new game.
Q. MCM is not showing.
If do not show the MCM after waiting a few minutes, please try change the load order of esp.
If it still does not showing, please enter "setstage ski_configmanagerinstance 1" from the console.
Q. I installed all required Mods but the poser presets does not displayed on MCM and menu.
or I get an error that Mfg Console is not installed at startup.
A.If you installed this Mods and after installing Campfire or Sexlab etc., it will be overwritten by old PapyrusUtil included in those Mods and will not function properly.
So delete old PapyrusUtil included in installed mods or overwrite to new PapyrusUtil.
Q. Can not get strength of expression other than Dialogue Anger.
This is a Mfg Console bug in "MfgConsoleFunc.pex".
But I fixed mfg script for this problem, so that you can get the strength of all facial expressions.
However, If you install PHP and after installing Sexlab or Osex or etc. will overwrite the fixed mfg script to original mfg script with bug.
Please delete the original "MfgConsoleFunc.pex" included in the after installed Mods or overwrite to my fixed "MfgConsoleFunc.pex" of this PHP.
Q. How many poser Mods can registration?
A. this mod is no limit.
However, FNIS has an upper limit on the number of registrations, so the maximum number of FNIS registrations is the upper limit.
Q.FootIK OFF Spell is necessary?
A. It is not necessary because automatically disable FootIK when posing.
Q. Where is the created face presets? Also can I publish the my face presets to Nexus?
A. Version2 Face presets are saved in "Data/SKSE/Plugins/Poserhotkeys/FaceData"
And you can publish your created face presets to Nexus.
Q.I downloaded optional presets, but not getting any poses showing.
A.If the downloaded preset does not work, it is most users make installation mistakes.
Please check that the downloaded preset is correctly installed in the following directory.
"Data/SKSE/Plugins/PoserHotKeys/PoserData"
And if using MO, make sure there are no older presets in the overwrite folder.
Many of the reasons it doesn't work are due to problems with the way users install it.
I'm often asked by nexus users to update the presets for each pose mod, but it's difficult in time to accommodate weekly pose mods like GS Poses.
So I developed an editor that allows users to update their own presets.
This editor will allow you to add pose names and categorize to existing PHP presets and presets generated from PoserDataGen.
Of course, edit your favorite preset, so you can create your own poser pack.
The editing operation is very easy.
1. Create a new preset or load an existing preset (JSON).
Existing presets can be found at "Data\SKSE\Plugins\PoserHotKeys\PoserData".
(If you are using Mod Organizer, register "PoserDataEdit.exe" and execute it from MO)
2. If you want to create a new preset, open FNIS_MODNAME_LIST.txt in the pose mod you want to use.
Create a new file from the editor, add as many poses (rows) as you need, and enter the AnimEvent defined in the "AnimEvent" column.
For "PoseName", enter the pose name to be displayed in PHP's poser menu. (Double-byte characters can also be used)
(If "PoseName" is empty, "AnimEvent" will be displayed as the pose name)
3. Saving the preset will update the PHP poser menu.
(Presets must be saved to "Data\SKSE\Plugins\PoserHotKeys\PoserData")
This tool can be download from the Main file.
Good luck.
I Installed this mod, and got the MFG Fix.
it shows me opparco mfg command for SSE and Mfg Fix both are in conflict.
funfact i did not Install opparco mfg command for SSE.
I Deleted Mfg Fix and Tryed opparco mfg command for SSE
same here.
Mfg Fix and opparco mfg command for SSE are in conflict but Mfg Fix was already gone can someone help x.x
My problem may not be unique but I would still like to see if anyone has any guidance. I cannot, for the life of me, get this to register in MCM. I already had the vast majority of required mods installed due to other animation/pose mods I was using. I am guessing it might be a load order issue? I have tried putting it near the top (underneath the required mods of course) and even near the bottom but many minutes of waiting yield no menu. I even used the console command that mille posted in the sticky but that only registers the MCM menus that I already have present. Maybe I'm just not being patient enough waiting in game.
Any ideas would be helpful.
Is it some kind of issue or pretty motion poses just aren't made with head tracking possible?
ive this both on le and se skyrim, so i an guarantee the mod worked perfect if you dont install sexlab, the thing is i cant disable sexlab like i disable cloth armor, this is animation mod, so you have to uninstall sexlab v1.62