As much as I like it from the outside (perfect spot - a boat in front of it) it does not work for me on the inside: missing floor, walls.. Shame. Did not read about this kind of thing in the comments below, so it must be on my end - although with just one esp to load that could not be that difficult for my current set up. Edit: probably elfx. Edit: uninstalled elfx - problem still there.
Brandiibuck wrote: congrats on the release! i'd test it out and share screenshots, but my laptop has been failing me and skyrim is crashing most of the time i try to enter a different cell D:
michaelspicer16 wrote: Thank you very much Nicole! And no need to feel obligated to do anything such as that your praise is more than enough! .... and about your laptop what are the specs? because judging from your screenshots I see that you use ENB and possibly some detailed Textures may I recommend Optimizer Textures (Ordenador)...this has helped me more times that I can count at this point.
Brandiibuck wrote: i use stakado cinemascope enb and tamriel reloaded hd (with the 1k texture option), i have tried uninstalling both of these and i still get crashes. i am planning on doing a factory reset to see if that helps, but first i will try the optimizer textures, thanks!
i don't know my laptops specs off the top of my head, but let me run speccy...
michaelspicer16 wrote: From looking at your specs I can see that they are clearly not the problem. I think a factory reset would be the best option as a last resort.
Reylegh wrote: you have the possibility to connect a second monitor? I want you to check the ram usage, I think there is a plug in to do that ingame as well. If it crosses a certain amount you might expirience crashes. I had the same, CTD or freeze after couple of seconds. But I managed to reduce the ram usage from 3GB to 1GB without any compromise in the quality If it is really a ram issue I will be able to help you out. But first you need to confirm that.
@Micheal: I can also try to make some screenshots once I am home, but I am not sure if they will look good, my setup is a bit "dark"
Brandiibuck wrote: I think my brother has an old monitor, I will check with him. Thanks!
@Reylegh Hey I am aware of the lighting problems lol I will be working on a solution in the next update!
I am adding some shots, but now I got a problem with my ENB....it kinda has no DoF and I can't repair it. I will get another ENB and set it up right, and when you add some light into it I will make new shots.
So as for the dungeon and basement area, you need some more lights, some wall torches maybe, something, it's really dark there
Also something that was mentioned - I have 2 followers and one stayed outside, and only Sofia followed, sofia has a script to teleport to the player when she is too far away,m that might be why she followed. One more issue I saw, it's cosmetic, but might be more immersive - when you exit the dungeon area, for a split second when the door opens you see the blank texture area behind the area. Put maybe something dark behind the door to cover it up
Hey Reylegh! Thank you so much for taking taking the shots!!! and I'm aware that the dungeon and the bathing area are fairly dark, i'm currently working on amending those areas including adding more lighting to the main living area. also I will look into putting a "void wall" (I'm just gonna call it that ) behind the door!
Very nice, and may well use if there's a relocate patch to allow both ETaC, other mods, and this to work together.
(Appreciate you have a problem in R/Wood, as space to north of bridge, both sides, is used by a lot of mods, incl TPOS, White River Cottage and so on, space opposite Bannered Mare is also used by many mods, and even opposite the lumber yard can be pretty busy. Somewhere a fair bit further west of where you have it now might be OK though?)
Otherwise:
Had same problem on dungeon navmesh. Follower seemed too frightened to enter :-)
Agree on the need for more lighting in the jail. Nice to have one in Riverwood, but it's really too dark at present
Meant to be constructive! Keep going, you're doing fine
Hey donkeywho I will defiantly be creating a patch to make this work with city and Town overhauls by relocating the house to somewhere outside of riverwood's entrance possibly. (I'll experiment with the location a bit ).
And I appreciate any criticism, constructive or otherwise! ...about the Navmesh I will attempt to fix it in the second update (After lighting is fixed)
Had a chance to try out the Release Version and it's really nice now. Navmesh and followers work fine, and the lighting is much better.
I use RLO and you also did me a big favour by making me look at that too, and adding RLO Torches and Torches for RLO!
A little patch to move it out of ETaC's way and it will be just great. Bear in mind that some other mods add bridges/buildings directly across from the lumber mill, so ideally it needs to be a bit further in the direction of the lake, but before the terrain starts to rise up. Not sure if that's the best description ever, but you should get the idea :-)
Thank you very much for this. Fits well into the local scene, without going over the top. Really nice piece of work
congrats on the release! i'd test it out and share screenshots, but my laptop has been failing me and skyrim is crashing most of the time i try to enter a different cell D:
Thank you very much Nicole! And no need to feel obligated to do anything such as that your praise is more than enough! .... and about your laptop what are the specs? because judging from your screenshots I see that you use ENB and possibly some detailed Textures may I recommend Optimizer Textures (Ordenador)...this has helped me more times that I can count at this point.
i use stakado cinemascope enb and tamriel reloaded hd (with the 1k texture option), i have tried uninstalling both of these and i still get crashes. i am planning on doing a factory reset to see if that helps, but first i will try the optimizer textures, thanks!
i don't know my laptops specs off the top of my head, but let me run speccy...
you have the possibility to connect a second monitor? I want you to check the ram usage, I think there is a plug in to do that ingame as well. If it crosses a certain amount you might expirience crashes. I had the same, CTD or freeze after couple of seconds. But I managed to reduce the ram usage from 3GB to 1GB without any compromise in the quality If it is really a ram issue I will be able to help you out. But first you need to confirm that.
@Micheal: I can also try to make some screenshots once I am home, but I am not sure if they will look good, my setup is a bit "dark"
my brother let me borrow his portable hard drive, so I backed up everything I needed ^^ it didn't take nearly as long as a thought it would either! very pleased
Might down load and try, but im concerned it may not mesh well with ETAC (expanded towns and city), Can you confirm this ? Either way, will track and download.
Hey MisterB1969 I don't personally use ETAC but I will defiantly Check to see if there are any Incompatibilities And if so I shall "Attempt "create a patch!
...no promises though as that mod pretty much covers every empty space in the towns. perhaps I shall move the house to just outside the Town In the compatibility Patch?
Brandiibuck wrote: congrats on the release! i'd test it out and share screenshots, but my laptop has been failing me and skyrim is crashing most of the time i try to enter a different cell D:
michaelspicer16 wrote: Thank you very much Nicole! And no need to feel obligated to do anything such as that your praise is more than enough! .... and about your laptop what are the specs? because judging from your screenshots I see that you use ENB and possibly some detailed Textures may I recommend Optimizer Textures (Ordenador)...this has helped me more times that I can count at this point.
Brandiibuck wrote: i use stakado cinemascope enb and tamriel reloaded hd (with the 1k texture option), i have tried uninstalling both of these and i still get crashes. i am planning on doing a factory reset to see if that helps, but first i will try the optimizer textures, thanks!
i don't know my laptops specs off the top of my head, but let me run speccy...
michaelspicer16 wrote: From looking at your specs I can see that they are clearly not the problem. I think a factory reset would be the best option as a last resort.
Reylegh wrote: you have the possibility to connect a second monitor? I want you to check the ram usage, I think there is a plug in to do that ingame as well. If it crosses a certain amount you might expirience crashes. I had the same, CTD or freeze after couple of seconds. But I managed to reduce the ram usage from 3GB to 1GB without any compromise in the quality If it is really a ram issue I will be able to help you out. But first you need to confirm that.
@Micheal: I can also try to make some screenshots once I am home, but I am not sure if they will look good, my setup is a bit "dark"
I think my brother has an old monitor, I will check with him. Thanks!
So if you can connect another screen, let task manager run on it and look at the ram usage of the Game and the ENBHost
I'm glad you like it! And I apologies about that I thought I did the Navmesh properly but I Gauss not...Give me a Minuit and I'll get working on a fix ASAP.
Give Feedback
33 comments
Edit: probably elfx.
Edit: uninstalled elfx - problem still there.
I am adding some shots, but now I got a problem with my ENB....it kinda has no DoF and I can't repair it. I will get another ENB and set it up right, and when you add some light into it I will make new shots.
So as for the dungeon and basement area, you need some more lights, some wall torches maybe, something, it's really dark there
Also something that was mentioned - I have 2 followers and one stayed outside, and only Sofia followed, sofia has a script to teleport to the player when she is too far away,m that might be why she followed.
One more issue I saw, it's cosmetic, but might be more immersive - when you exit the dungeon area, for a split second when the door opens you see the blank texture area behind the area. Put maybe something dark behind the door to cover it up
Thank you so much for taking taking the shots!!!
and I'm aware that the dungeon and the bathing area are fairly dark, i'm currently working on amending those areas including adding more lighting to the main living area.
also I will look into putting a "void wall" (I'm just gonna call it that
(Appreciate you have a problem in R/Wood, as space to north of bridge, both sides, is used by a lot of mods, incl TPOS, White River Cottage and so on, space opposite Bannered Mare is also used by many mods, and even opposite the lumber yard can be pretty busy. Somewhere a fair bit further west of where you have it now might be OK though?)
Otherwise:
Had same problem on dungeon navmesh. Follower seemed too frightened to enter :-)
Agree on the need for more lighting in the jail. Nice to have one in Riverwood, but it's really too dark at present
Meant to be constructive! Keep going, you're doing fine
:-)
And I appreciate any criticism, constructive or otherwise!
...about the Navmesh I will attempt to fix it in the second update (After lighting is fixed)
I use RLO and you also did me a big favour by making me look at that too, and adding RLO Torches and Torches for RLO!
A little patch to move it out of ETaC's way and it will be just great. Bear in mind that some other mods add bridges/buildings directly across from the lumber mill, so ideally it needs to be a bit further in the direction of the lake, but before the terrain starts to rise up. Not sure if that's the best description ever, but you should get the idea :-)
Thank you very much for this. Fits well into the local scene, without going over the top. Really nice piece of work
also I have a few location ideas in mind for the compatibility patch
.... and about your laptop what are the specs? because judging from your screenshots I see that you use ENB and possibly some detailed Textures may I recommend Optimizer Textures (Ordenador)...this has helped me more times that I can count at this point.
https://www.nexusmods.com/skyrim/mods/12801/?
i don't know my laptops specs off the top of my head, but let me run speccy...
Operating System: Windows 10 Home 64-bit
CPU
Intel Core i7 5500U @ 2.40GHz119 °F
Broadwell-U 14nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-2
Motherboard
ASUSTeK COMPUTER INC. Q551LNB (SOCKET 0)117 °F
Graphics
2047MB NVIDIA GeForce 840M (ASUStek Computer Inc)110 °F
Storage
111GB SSD2SC120G1CS1754D117-551 (SSD)
@Micheal: I can also try to make some screenshots once I am home, but I am not sure if they will look good, my setup is a bit "dark"
I will be working on a solution in the next update!
Its a shame you had to do a factory reset! ....I hope you didn't loose anything important!
Also Thank you for Posting some shots it really helps!
...no promises though as that mod pretty much covers every empty space in the towns. perhaps I shall move the house to just outside the Town In the compatibility Patch?
So if you can connect another screen, let task manager run on it and look at the ram usage of the Game and the ENBHost
Please let me know if you experience any problems!
but my follower dont follow me into the house - mo navmesh i think
And I apologies about that I thought I did the Navmesh properly but I Gauss not...Give me a Minuit and I'll get working on a fix ASAP.
Thank you very much Remhac!