The recent update will give you access to 3 more armor sets. The strider, bearclaw and barbarian armor. I hope you guys like it.
I do know that for an update its pretty small given that I have been inactive for a long time. But no worries, I still intend to work on this mod and still work towards expanding the variety of the content.
Bryanwee - if you read the comments below by Siryux and YourMemorial, do you think the texture path problem thy describe is a serious problem for this mod?
And does version 2.2 fix the problem they describe?
This is actually a reply I made to another post, but I figured I should copy it to here so people can see.. @bryanwee20 feel free to delete it if you don't support what I did here.
I tried fixing the missing textures etc. The comment basically describes how I got there, if you are too lazy to read it skip to the bottom for a fix.
-
I'm actually in the process of checking the texture paths in every single .nif file provided by this mod and correcting them where needed.. (Removing "d:\games\tsev skyrim le\data\" from every texture path)
Edit: It's extremely tedious lol. The files have up to 4 incorrect paths, and only a very few do not have to be corrected at all. (Which means you need to at least check every single file). I'm not even sure it's all needed for stuff to work properly in game. You'd have expected more reports of stuff missing.
Edit 2: After a couple of hours of tedious work (I did discover some new music during that time! ) I finished correcting the texture paths for all meshes that come with this mod. I did not change anything else, simply opened the meshes in nifskope, changed texture paths if needed and saved them.
I could upload them somewhere but I'm not sure about permissions.. Edit: A mod can remove the link if it's not allowed, enjoy - https://onedrive.live.com/redir?resid=F57B564CCC624EB1!165&authkey=!AA8VWjIIKQcnTtk&ithint=file%2czip
Edit 3: It seems there are also just missing textures.. So there are still bandits walking around with purple armors. I also installed the textures and meshes folder from the old version of this mod (but not its esp! ) and this combined with the edited meshes seems to fix most issues.
http://www.nexusmods.com/skyrim/mods/50058/
Edit 4: One thing that still wasn't fixed was one light iron armor set that causes invisible legs. All paths (esp->meshes->textures) seemed to be correct so with my limited knowledge I couldn't figure out what was wrong. The light armor set using "Custom\Immersive Mashups\Nord Beserker Set\cuirassM_1.nif" works, but the one using "Custom\Immersive Mashups\Nord Slaver Set\cuirassM_1.nif" does not.
My solution was to just point both sets to the Nord Berserker meshes. To do this, open the file in TES5Edit, open 'Armor Addon', find 00ArmorLightIronCuirassBA and change the Male world model to "Custom\Immersive Mashups\Nord Beserker Set\cuirassM_1.nif". I'm not sure if the female model causes problems, but to be sure I also changed the Female world model to "Custom\Immersive Mashups\Nord Beserker Set\cuirassF_1.nif"
(Note that in the path Beserker seems misspelled, but the folder is actually called like that! )
This might result in a slightly different look not intended by the author, but at least it fixes the mercenaries with invisible legs...
Final edit: The fixed esp: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!167&authkey=!AOR7sF2P2wZmJKA&ithint=file%2czip
Edit 30-07-2016: I just noticed this is included in the Dangerous mod master list on Reddit, so I felt it was needed to inform you of the comment AndrealphusVIII made: "After doing this fix, I still end up with missing leg meshes for the following sets: - Barbarian Cuirass - Iron Mercenary Cuirass - Nocturnal Apostle Armor - Strider Outfit - Strider Dark Outfit - Strider Snowscape Outfit - Strider Woodland Outfit Also, the textures in the Justearin Armor Piece seem to be mismatched. (too dark compared to the other ones.)" I have not yet verified if this is indeed the case, but to be honest I don't feel like looking at these files again, I'm sorry If someone else wants to take a look at this, all I did with the other meshes was open them in Nifskope and check the texture paths. After that you can check the texture folders (of both this mod and v1) to see if the appropriate files are present
-
TL; DR
So to fix most issues you need to: 1) DL this mod 2) Replace its meshes with my meshes that have fixed texture paths: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!165&authkey=!AA8VWjIIKQcnTtk&ithint=file%2czip 3) Replace its esp with my esp that fixes the invisible legs issue for a light iron armor set: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!167&authkey=!AOR7sF2P2wZmJKA&ithint=file%2czip 4) Install the old mod (http://www.nexusmods.com/skyrim/mods/50058/ ) but remove the esp!! Its textures (these are needed! ) and meshes (possibly not needed) shouldn't conflict because of a different folder structure. 5) Problems may still occur (according to user AndrealphusVIII, see above), but as of now (30-07-2016) I have no intention of trying to solve them.. sorry!
Thanks for fixing this YourMemorial. If bryanwee20 doesn't update the files maybe you could post this as a bugfixing mod since a lot of people wouldn't know unless they read the comments. Then again, I don't know if that violates permissions.
I've managed to port this to SE for myself. (Downloaded the fixes here, ran everything through cathedral assets optimizer, resaved esp in ck64.) Some very minor clipping here and there, though the only major issue I'm having is parts of the character's legs disappearing when wearing the vigilant armor on females. Otherwise the mesh fixes and installing the old versions mesh/texture folders below it did the trick for solving all the other issues. Some of the rogue/assassin mashups are great.
where is mesh Cuirass_Var01_1.nif? I cant find this mesh at all. It's for your light iron armor varient and its not in any of your mod files. Not this one OR the older one.
Man it's extremely hard to find good armor mod in the vast ocean of porno female armor mods. It's like there are like only 0.0001% of armor mod are worth using and the rest are porno female armors mods absolute garbage this site is turning into lovers lab 2.0.
Hey, wonderful mod, but I ran into a problem. It appears as if I cannot enchant any of the gauntlets or boots. Is there a fix, or was this intentional?
Hello bryanwee20! I translated mod Immersive Mashups on russian, ask permission so I can post the mod's on the Russian site. Advance thank you very much!
Give Feedback
258 comments
Got a small little update here.
The recent update will give you access to 3 more armor sets.
The strider, bearclaw and barbarian armor.
I hope you guys like it.
I do know that for an update its pretty small given that I have been inactive for a long time. But no worries, I still intend to work on this mod and still work towards expanding the variety of the content.
Bryanwee - if you read the comments below by Siryux and YourMemorial, do you think the texture path problem thy describe is a serious problem for this mod?
And does version 2.2 fix the problem they describe?
I tried fixing the missing textures etc. The comment basically describes how I got there, if you are too lazy to read it skip to the bottom for a fix.
-
I'm actually in the process of checking the texture paths in every single .nif file provided by this mod and correcting them where needed.. (Removing "d:\games\tsev skyrim le\data\" from every texture path)
Edit: It's extremely tedious lol. The files have up to 4 incorrect paths, and only a very few do not have to be corrected at all. (Which means you need to at least check every single file). I'm not even sure it's all needed for stuff to work properly in game. You'd have expected more reports of stuff missing.
Edit 2: After a couple of hours of tedious work (I did discover some new music during that time! ) I finished correcting the texture paths for all meshes that come with this mod. I did not change anything else, simply opened the meshes in nifskope, changed texture paths if needed and saved them.
I could upload them somewhere but I'm not sure about permissions.. Edit: A mod can remove the link if it's not allowed, enjoy - https://onedrive.live.com/redir?resid=F57B564CCC624EB1!165&authkey=!AA8VWjIIKQcnTtk&ithint=file%2czip
Edit 3: It seems there are also just missing textures..
http://www.nexusmods.com/skyrim/mods/50058/
Edit 4: One thing that still wasn't fixed was one light iron armor set that causes invisible legs. All paths (esp->meshes->textures) seemed to be correct so with my limited knowledge I couldn't figure out what was wrong. The light armor set using "Custom\Immersive Mashups\Nord Beserker Set\cuirassM_1.nif" works, but the one using "Custom\Immersive Mashups\Nord Slaver Set\cuirassM_1.nif" does not.
My solution was to just point both sets to the Nord Berserker meshes. To do this, open the file in TES5Edit, open 'Armor Addon', find 00ArmorLightIronCuirassBA and change the Male world model to "Custom\Immersive Mashups\Nord Beserker Set\cuirassM_1.nif". I'm not sure if the female model causes problems, but to be sure I also changed the Female world model to "Custom\Immersive Mashups\Nord Beserker Set\cuirassF_1.nif"
(Note that in the path Beserker seems misspelled, but the folder is actually called like that! )
This might result in a slightly different look not intended by the author, but at least it fixes the mercenaries with invisible legs...
Final edit: The fixed esp: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!167&authkey=!AOR7sF2P2wZmJKA&ithint=file%2czip
Edit 30-07-2016: I just noticed this is included in the Dangerous mod master list on Reddit, so I felt it was needed to inform you of the comment AndrealphusVIII made:
"After doing this fix, I still end up with missing leg meshes for the following sets:
- Barbarian Cuirass
- Iron Mercenary Cuirass
- Nocturnal Apostle Armor
- Strider Outfit
- Strider Dark Outfit
- Strider Snowscape Outfit
- Strider Woodland Outfit
Also, the textures in the Justearin Armor Piece seem to be mismatched. (too dark compared to the other ones.)"
I have not yet verified if this is indeed the case, but to be honest I don't feel like looking at these files again, I'm sorry
-
TL; DR
So to fix most issues you need to:
1) DL this mod
2) Replace its meshes with my meshes that have fixed texture paths: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!165&authkey=!AA8VWjIIKQcnTtk&ithint=file%2czip
3) Replace its esp with my esp that fixes the invisible legs issue for a light iron armor set: https://onedrive.live.com/redir?resid=F57B564CCC624EB1!167&authkey=!AOR7sF2P2wZmJKA&ithint=file%2czip
4) Install the old mod (http://www.nexusmods.com/skyrim/mods/50058/ ) but remove the esp!! Its textures (these are needed! ) and meshes (possibly not needed) shouldn't conflict because of a different folder structure.
5) Problems may still occur (according to user AndrealphusVIII, see above), but as of now (30-07-2016) I have no intention of trying to solve them.. sorry!
I've managed to port this to SE for myself. (Downloaded the fixes here, ran everything through cathedral assets optimizer, resaved esp in ck64.) Some very minor clipping here and there, though the only major issue I'm having is parts of the character's legs disappearing when wearing the vigilant armor on females. Otherwise the mesh fixes and installing the old versions mesh/texture folders below it did the trick for solving all the other issues. Some of the rogue/assassin mashups are great.
It's like there are like only 0.0001% of armor mod are worth using and the rest are porno female armors mods absolute garbage this site is turning into lovers lab 2.0.
Thanks!
much!