Thanks everyone for your screenshots, kind words and support !
09/02/2015 : Rampage updated to version 2.0, add LUT support with 7 presets. Switch on the fly with the GUI ;)
Note : - LUT textures came from my fallout 4 preset and weren't tweaked for the Rampage, which use a different PP method. Black will be crushed with some presets (ex : red epic crush, grand war), you can fix this easily by reducing HD6 contrast, in the GUI under enbeffect.fx.
Keep in mind most of them aren't intended for regular gameplay, just for screenshots & tweaks ! - You can use your own 4096x64 LUT textures by replacing existing ones or by editing enbeffect.fx (require some coding knowledge) ____________________________________________________
Currently this ENB isn't supported and won't be updated anymore.
The Wrapper version works however it does not have the settings as the version of the Injector for some reason. On the other hand, the Injector version does not load at all I installed as recommended and it does not work
bFloatPointRenderTarget=1 must be under [Display] into SkyrimPrefs.ini If you use MO go into the Puzzle pieces (Tools) > INI Editor.
Otherwise try to change bFloatPointRenderTarget to 0 and then back to 1
Go into the search box of your text editor (ctrl+F usually), enter "bFloatPointRenderTarget" without the quotes to see if you have none or more than 1 instance.
I had the exact same issue, if you're using steam then sometimes you can find a second copy of the skyrimprefs.ini file under Libraries/Documents/my games/skyrim (the first being under steam/steamapps/common/skyrim). Or at least this was the case for me. Once I changed the second file to 1 as the error message went away. Hope that helps someone
Thx Lok, so yes if you don't have MO you must always change the SkyrimPrefs.ini (and Skyrim.ini) into Documents/My Games/Skyrim as stated on our description page, it's the same with the other mods.
i copy and paste it to inside of my SkyrimPrefs.ini and under display and when i got to test it it said:"Can't find bFloatPointRenderTarget=1 or it have several copys"
The purpose of this setting is providing a more accurate lighting by using floating point verc’s/points instead of only int values. You can't run properly an ENB or any lighting mods without this line because they actively use this settings, a lot of guides around the web advertise to keep this value to “0” but this is a common misconception, keeping it disabled doesn’t provide any advantage (only issues) even in Vanilla. Comparison or something like that (if on 0)
If you have NMM (not Mod Organizer -MO- ), you simply must go into " C:\Users\yourusername\documents\My Games\Skyrim " and change or add your lines into the SkyrimPrefs.ini.
Have you check if you don't have also a "bFloatPointRenderTarget=0" lying around ? Maybe you have one line on 1 and one on 0 into the same file.
Hello thank you for an amazing enb. Just finished building my new pc and always wanted to use it. Which binaries should I use as 3.19 is no longer available. 2.92 or most recent? After spending a lot of time tweaking it to my liking I have one last thing I can't seem to fix. Compared to other presets it has a lot of tree and grass noise while moving. I try to ignore it as everything else is so damn good but it wears on you. I don't see it for instance on rudy nlva so I figure its a setting. Getting rid of distant sharpening/ sharpening/ enabling temporal AA helps but doesn't get rid of it. If I move against a rock so the walking animation happens grass and trees move. I don't want to say flicker more like crawling with ants almost.
Yo, for some reason i can't open the gui and i'm not sure if the ENB was installed or not. If you can get back to me it will be much appreciated. Thanks!
Why does Night Eye work out of the box with this ENB? Serious question cause other ENB's the Night Eye does not work. What setting is it in the ENB that makes that effect work here?
616 comments
09/02/2015 :
Rampage updated to version 2.0, add LUT support with 7 presets.
Switch on the fly with the GUI ;)
Note :
- LUT textures came from my fallout 4 preset and weren't tweaked for the Rampage, which use a different PP method.
Black will be crushed with some presets (ex : red epic crush, grand war), you can fix this easily by reducing HD6 contrast, in the GUI under enbeffect.fx.
Keep in mind most of them aren't intended for regular gameplay, just for screenshots & tweaks !
- You can use your own 4096x64 LUT textures by replacing existing ones or by editing enbeffect.fx (require some coding knowledge)
____________________________________________________
Currently this ENB isn't supported and won't be updated anymore.
Injector for some reason. On the other hand, the Injector version does not load at all I installed as recommended and it does not work
If you use MO go into the Puzzle pieces (Tools) > INI Editor.
Otherwise try to change bFloatPointRenderTarget to 0 and then back to 1
Go into the search box of your text editor (ctrl+F usually), enter "bFloatPointRenderTarget" without the quotes to see if you have none or more than 1 instance.
my 1st time try instal a ENB <-<
i copy and paste it to inside of my SkyrimPrefs.ini and under display
and when i got to test it it said:"Can't find bFloatPointRenderTarget=1 or it have several copys"
bFloatPointRenderTarget=1
bTreesReceiveShadows=1
bDrawLandShadows=1
bShadowsOnGrass=1
i used notepad++ and used search and it count only one:
bFloatPointRenderTarget=1
and i using NMM how my mod organizator so have to edit my NMM too?
and i will try follow lok7 guide
Comparison or something like that (if on 0)
If you have NMM (not Mod Organizer -MO- ), you simply must go into " C:\Users\yourusername\documents\My Games\Skyrim " and change or add your lines into the SkyrimPrefs.ini.
Have you check if you don't have also a "bFloatPointRenderTarget=0" lying around ?
Maybe you have one line on 1 and one on 0 into the same file.
EDIT :
Installation tutorial video
i guess is resolved but i didn't tested yet
So now, enjoy !
i bad can move my character but the " bFloatPointRenderTarget " be fixed unique problem i got to much slow
thanks for helped me
https://drive.google.com/open?id=0B9AaipzJB6FeM3dFblNrQ1NSa0E
Serious question cause other ENB's the Night Eye does not work.
What setting is it in the ENB that makes that effect work here?