No other mods required. All meshes and textures included.
These armors and helmets are not made by me. I take absolutely no credit for design.
I only combined and added it to the Stormcloaks.
All credit goes to Foxia, m150, lumps and gulchanar for optional helmet textures. Please refer all appreciation to them for the armors and helmets. See description for links.
I wanted my Stormcloaks to look very different from the regular guards. Figured some might like it.
Ulric's armor in the image section is Stormlord Armor SE from Immersive Armors. You can use the original mod, if you don't want to use IA.
NOTE 1: Female mesh was made for UNP body.
NOTE 2: If you install on a saved game and some Stormcloaks are not wearing new armor and/or horned helmets, resurrect in game console or wait indoors for your game's respawn time (10 days usually).
Game Console Instructions: - hit ~ key - use mouse to left click on body, you will see a reference id in the center of screen. - type "resurrect" or "resetinventory" if NPC is mounted (type without quotations). - hit Enter key - exit from console using ~ key. You might be lucky enough to select more than one NPC, if they are close to each other.
NOTE 3: Windhelm guards will wear guard armor and non-horned helmets, unless they have changed to Stormcloaks or you are using Windhelm Guards wear Stormcloak Battle Armor Patch
NOTE 4: Toggle off soldier distribution in MCM if using Immersive Armors
- No Stormcloaks - No locations changed (for better compatibility) - New Weapons added - Elite armors added - Removed Bolgeir Bearclaw's helmet (As in vanilla game) - Uses Guard Armor Replacer's Stormcloak helmet. Not vanilla. My Horned helmet versions will overwrite this helmet.
Guards Armor Replacer - SBAR Compatible2 4.1d
- No Stormcloaks - No locations changed (for better compatibility) - New Weapons added - Elite armors added - Removed Bolgeir Bearclaw's helmet (As in vanilla game) - Uses vanilla Stormcloak Helmet. My Horned helmet versions will overwrite this helmet.
Use only one ESP REPLACER FILE with Guards Armor Replacer Asset file. Do not use any of Guards Armor Replacer's ESP files. This ESP is used instead. Thanks to DanielUA for permission to upload.
Load Stormcloak Battle Armor Replacer below/after Guards Armor Replacer Assets and ESP (or my replacement ESP). Load my patches or texture files below/after Stormcloak Battle Armor Replacer
There is a good description of what each version adds and which patch is used for which version. PLEASE READ IT. Seriously, take a @#$%ing moment. I can't stress this enough.
PATCH FILES - DO NOT UPDATE
- uninstall old version and patches - clean save - install new version and then patches
NPC's armor changes are saved.
You must make a clean save without the previous changes, so that these new changes show up. Making armor changes to saved games will sometimes not take, therefore you have to resurrect in game console or wait your games' respawn time.
Hi! I installed your mod along with the patch for Immersive patrols, and upon inspection with Tes5edit the patch has two errors:
[00:00] ImmersiveNilheimSonsLeader "Stormcloak Leader" [NPC_:04061030] [00:00] NPC_ \ Packages \ PKID - Package -> [0406101B] < Error: Could not be resolved > [00:00] ImmersivePaleSonsLeader "Stormcloak Leader" [NPC_:04061032] [00:00] NPC_ \ Packages \ PKID - Package -> [0406101E] < Error: Could not be resolved >
I don't know how to fix the two missing packages, if you could help I'd be most grateful... Can't wait to try your mod, and thanks for supporting Oldrim :)
Sorry for late response. This patch is probably outdated, since IA has been updated recently. He may have renamed those 2 leaders. Check in Tes5edit if these leaders still exist. If they don't exist, you could remove these entries from my mod. But there might be a couple leaders without my armor.
Judging by how many files you've downloaded, make sure you do a clean save before installing another file. Also, if you are having pixel problems with the Officer armor, then download my Officer Texture Patch under miscellaneous files.
The mod doesn't work! I put it through HMM and after a failure in the Data folder - to no avail. I have no idea what's the matter, the latest patch of skyrim.
Not sure what mod manager HMM is. Unless you meant NMM. Not sure what problem you are having. Uninstall and then download file again and install. Make sure the esp is activated.
so i have a very noob question. i downloaded the Replacer 3 Horned FF Helmets, the reason i downloaded the 3 is Because i want the high rank to be more special. now, i want to put the heroic thing ( the one for officers only), is it okay and will work together?
I don't quite understand what you want. Version 3 adds the Battle Armor and horned helmets to all regular Stormcloaks. Nothing for Officer. If you want the Heroic Armor for the Officers and what's in version 3, choose version 4. If you only want the Officer's to wear Heroic armor and leave the regular Stormcloaks vanilla, then choose version 5.
I sincerely apologize in advance if I've missed something somewhere, but all of these armors are showing up as Light Armor in the game. Even the plated ones. I tried overwriting with Heroic Stormcloak Armor from lumps and *that* showed up as Heavy. I have Ordinator and prefer the Heavy perks over Light. Did I do something wrong? Or are all of the armors flagged as Light in this mod?
I left all armor as light, I believe. You can easily change that. These are new armors and do not replace the vanilla one's except for the Officer one. That one is light in vanilla, too.
That makes sense. :-) And yeah, I realize I can grab the edit tool to change the flags, and I'm going to have to anyway with 80+ mods running right now. Hahaha
I appreciate the reply and the mod. My Stormcloaks look so much better for it.
The armor creators did an awesome job on these armors. I use Guards Armor Replacer, but still use these armors for Stormcloaks. Just suits them more IMO.
if you are using a newer version of GAR minimal, I can't say for sure it won't mess up some Windhelm guards. My esp replacer was on an older version of GAR minimal. I noticed there were Stormcloak edits not removed, so I made my esp replacer with those edits removed.
You can replace the minimal esp with mine and see if the guards are wearing the proper armor after resetinventory. Let me know if that solves it. If not, let me know what versions of my mod and my patches you are using.
why ralof wearing the battle armor?just like a normal soldier.I install the second file - Stormcloak Battle Armor Replacer(2) - Officer 1.5. should i use other file to change ralof`s armor? i wish ralof can wear heroic shormcloak armor.
In the vanilla game he wears regular Stormcloak armor, so my mod doesn't change that. If you want to change it then: - Open this mod in xedit - collapse my ESP (click +) - collapse Outfit and click Ralofoutfit - look on right side under INAM - Items (sorted) - under my ESP double click 848_ArmorStormcloakBattleCuirassv2 "Stormcloak BT Armor 2" [ARMO:020012C8] - A drop down arrow will appear on the right, then click it and scroll to ArmorStormcloakBearCuirass "Stormcloak Officer Armor" [ARMO:0008697E] and select - under my ESP double click 848_ArmorStormcloakBattlerBoots "Stormcloak Battle Boots" [ARMO:020012CE] - A drop down arrow will appear on the right, then click it and scroll to ArmorStormcloakBearBoots "Stormcloak Officer Boots" [ARMO:00086981] and select - close xedit and click OK in the popup box to complete changes (make sure only Stormcloak Battle Armor Replacer.esp is checked. If there are more esp"s checked, then uncheck every esp and click Ok - nothing will be changed. Repeat my instructions again until you get it right and stay away from any other esp's. I would save a copy of this changed esp somewhere in case you reinstall this mod. You can then replace my esp with your modified esp.)
286 comments
No other mods required. All meshes and textures included.
These armors and helmets are not made by me.
I take absolutely no credit for design.
I only combined and added it to the Stormcloaks.
All credit goes to Foxia, m150, lumps and gulchanar for optional helmet textures.
Please refer all appreciation to them for the armors and helmets. See description for links.
I wanted my Stormcloaks to look very different from the regular guards. Figured some might like it.
Ulric's armor in the image section is Stormlord Armor SE from Immersive Armors. You can use the original mod, if you don't want to use IA.
NOTE 1: Female mesh was made for UNP body.
NOTE 2: If you install on a saved game and some Stormcloaks are not wearing new armor and/or horned helmets, resurrect in game console or wait indoors for your game's respawn time (10 days usually).
Game Console Instructions:
- hit ~ key
- use mouse to left click on body, you will see a reference id in the center of screen.
- type "resurrect" or "resetinventory" if NPC is mounted (type without quotations).
- hit Enter key
- exit from console using ~ key.
You might be lucky enough to select more than one NPC, if they are close to each other.
NOTE 3: Windhelm guards will wear guard armor and non-horned helmets, unless they have changed to Stormcloaks or you are using Windhelm Guards wear Stormcloak Battle Armor Patch
NOTE 4: Toggle off soldier distribution in MCM if using Immersive Armors
Let me know if there are any problems.
TWO VERSIONS AVAILABLE:
Guards Armor Replacer - SBAR Compatible1 4.1d
- No Stormcloaks
- No locations changed (for better compatibility)
- New Weapons added
- Elite armors added
- Removed Bolgeir Bearclaw's helmet (As in vanilla game)
- Uses Guard Armor Replacer's Stormcloak helmet. Not vanilla. My Horned helmet versions will overwrite this helmet.
Guards Armor Replacer - SBAR Compatible2 4.1d
- No Stormcloaks
- No locations changed (for better compatibility)
- New Weapons added
- Elite armors added
- Removed Bolgeir Bearclaw's helmet (As in vanilla game)
- Uses vanilla Stormcloak Helmet. My Horned helmet versions will overwrite this helmet.
Use only one ESP REPLACER FILE with Guards Armor Replacer Asset file.
Do not use any of Guards Armor Replacer's ESP files.
This ESP is used instead. Thanks to DanielUA for permission to upload.
Load Stormcloak Battle Armor Replacer below/after Guards Armor Replacer Assets and ESP (or my replacement ESP).
Load my patches or texture files below/after Stormcloak Battle Armor Replacer
Spanish Translation Link (Traduccion de Stormcloak Battle Armor Replacer al Español)
Stormcloak Battle Armor Replacer Spanish by zaxon007
EVERYONE READ: Click DESC tab and scroll down.
There is a good description of what each version adds and which patch is used for which version.
PLEASE READ IT. Seriously, take a @#$%ing moment. I can't stress this enough.
PATCH FILES - DO NOT UPDATE
- uninstall old version and patches
- clean save
- install new version and then patches
NPC's armor changes are saved.
You must make a clean save without the previous changes, so that these new changes show up.
Making armor changes to saved games will sometimes not take, therefore you have to resurrect in game console or wait your games' respawn time.
[00:00] ImmersiveNilheimSonsLeader "Stormcloak Leader" [NPC_:04061030]
[00:00] NPC_ \ Packages \ PKID - Package -> [0406101B] < Error: Could not be resolved >
[00:00] ImmersivePaleSonsLeader "Stormcloak Leader" [NPC_:04061032]
[00:00] NPC_ \ Packages \ PKID - Package -> [0406101E] < Error: Could not be resolved >
I don't know how to fix the two missing packages, if you could help I'd be most grateful... Can't wait to try your mod, and thanks for supporting Oldrim :)
im using only one armor files as recomended
i downloaded the Replacer 3 Horned FF Helmets,
the reason i downloaded the 3 is Because i want the high rank to be more special.
now, i want to put the heroic thing ( the one for officers only), is it okay and will work together?
sorry for being so noob
Version 3 adds the Battle Armor and horned helmets to all regular Stormcloaks. Nothing for Officer.
If you want the Heroic Armor for the Officers and what's in version 3, choose version 4.
If you only want the Officer's to wear Heroic armor and leave the regular Stormcloaks vanilla, then choose version 5.
im so godamn dumb
I appreciate the reply and the mod. My Stormcloaks look so much better for it.
You can replace the minimal esp with mine and see if the guards are wearing the proper armor after resetinventory. Let me know if that solves it. If not, let me know what versions of my mod and my patches you are using.
should i use other file to change ralof`s armor?
i wish ralof can wear heroic shormcloak armor.
- Open this mod in xedit
- collapse my ESP (click +)
- collapse Outfit and click Ralofoutfit
- look on right side under INAM - Items (sorted)
- under my ESP double click 848_ArmorStormcloakBattleCuirassv2 "Stormcloak BT Armor 2" [ARMO:020012C8]
- A drop down arrow will appear on the right, then click it and scroll to ArmorStormcloakBearCuirass "Stormcloak Officer Armor" [ARMO:0008697E] and select
- under my ESP double click 848_ArmorStormcloakBattlerBoots "Stormcloak Battle Boots" [ARMO:020012CE]
- A drop down arrow will appear on the right, then click it and scroll to ArmorStormcloakBearBoots "Stormcloak Officer Boots" [ARMO:00086981] and select
- close xedit and click OK in the popup box to complete changes
(make sure only Stormcloak Battle Armor Replacer.esp is checked. If there are more esp"s checked, then uncheck every esp and click Ok - nothing will be changed. Repeat my instructions again until you get it right and stay away from any other esp's. I would save a copy of this changed esp somewhere in case you reinstall this mod. You can then replace my esp with your modified esp.)