I was able to get it working just by using Cathedral Assets Optimizer and NEMESIS.
1. Extract the downloaded archive into a folder 2. Open CAO 3. Click on open directory and navigate to the extracted mod 4. Run CAO (make sure the option: necessary optimizations is checked under the animation tab) 5. Add the mod folder back to an archive 6. Install manuallly 7. Run NEMESIS
I was able to get it to work for SE (thanks Zero_Ryoko) but I was wondering, is there a way to make it so your character will walk on all fours all the time, not just when sprinting or sneaking?
can someone port this to se? i tried following the steps others have said worked but I cant get it to work and am hoping a see port will be made for ppl like me with -100 modding skill level...
*Note* the "(" and ")" around folders names will not be there in the actual folders I am using them just for easier navigation 1) install SKYUI 2) Install FNIS 3) Install FNIS PCEA 2 4) Navigate to \SteamLibrary\steamapps\common\Skyrim Special Edition\Data\Meshes\actors\character\animations\FNIS_PCEA2 or \SteamLibrary\steamapps\common\Skyrim\Data\Meshes\actors\character\animations\FNIS_PCEA2 5) Create a new folder called 2KISS(or what ever you want but it must have the 2 at the start!!!) in the above directory *open this folder and do not close it you need this location for drag and drop* *For Skyrim LE* 6) MANUALY Download this mod(KISS) "full version", open the RAR and inside you will see the (Meshes) folder, open it then open (actors), then (charachter). here u will see (animations) and (Behaviors) folders. 7) Open the (Behaviors) folder put the "sprintbehavior.hkx" file in the 2KISS folder you made above. (Do Not CLose The "KISS RAR" window. go back to where you see (animations) and (Behaviors) folders. 8) Open the animations folder, ingnore the (female) and (male) folders. highlight and move all the other files in the "2kiss" folder. Now *choose only *1* (female) or (male) *wich do u play as in game*. open the corresponding folder and move the hkx to the "2KISS' folder. 9) now run GenerateFNISforUsers.exe 10) start skyrim(launch SKSE), load what ever save or new game, go to the MCM menu, find FINS PCEA2 select KISS ALSO MAKE SURE THAT (xp32_new_anim_pack) IS *NOT* CHECKED** select "Refresh PCEA2 animations NOW" close MCM (and maybe deselect other animations) IF something is not working. This should get this working, it works for me. *SOME ANIMATION MODS WILL NOT APPEAR IN MCM UNDER FNIS PCEA. IF THEY ALTER ANY OF THE ANIMATIONS THAT KISS DOES THEN SOMETHING MAY NOT WORK DUE TO CONFLICTS.* *For Skyrim SE* 6) MANUALY Download this mod(KISS) "full version", open the RAR and inside you will see the (Meshes) folder, open it then open (actors), then (charachter). here u will see (animations) and (Behaviors) folders. 7) Open the (Behaviors) folder put the "sprintbehavior.hkx" file in the 2KISS folder you made above. (Do Not CLose The "KISS RAR" window. go back to where you see (animations) and (Behaviors) folders. 8) Open the animations folder, ingnore the (female) and (male) folders. highlight and move all the other files in the "2kiss" folder. 9) You will need to follow this guide https://www.nexusmods.com/skyrimspecialedition/mods/2970 BUT put "converttoskyrimSE.bat" and "HavokBehaviorPostProcess.exe" in the 2KISS folder! You may also need to run "converttoskyrimSE.bat" as an administrator! 10) now run GenerateFNISforUsers.exe 11) start skyrim(launch SKSE), load what ever save or new game, go to the MCM menu, find FINS PCEA2 select KISS ALSO MAKE SURE THAT (xp32_new_anim_pack) IS *NOT* CHECKED** select "Refresh PCEA2 animations NOW" close MCM (and maybe deselect other animations) IF something is not working. Thanks @ Zero_Ryoko for your comment to help me make this.
yes this will only set the animation for you alone, to make it affect khajits only is beyond me at this time but i do plan to make it so but this will be years away. if i even get to it. I don't know What Elderscrolls 6 will bring nor do I know what curveballs life will continue to throw in my face. I have not even decided to move onto SE because LE has been a great testing ground for me and at this time makes se look bad. :P
I have followed the instructions and finally got the Kiss folder to show up. I only want the run animation so I have only taken the run behavior and run for gender (bot not the gender folder itself) and put them in 2kiss. I have also put the other two required files in 2kiss and ran as administrator .bat. Ran fnis multiple times too and deployed mods to make sure everything was correct. When I get in game I have a vanilla run animation which shows me I do not have any other run animations installed. I then go into the MCM disable everything from pcea2 and then enable kiss and tell it to refresh. Once this is all done my character will T-pose while sprinting. Anyone got an idea of what is going wrong? Maybe its vortex since it "manages" the folder?
The only instruction I'm not perfectly clear on is the link where it says "4. Run this file through Nexus Mod Manager picking which Animations you want". I assume adding the files to the kiss folder is what this would mean but not sure so this could be what is screwing it up.
Give Feedback
569 comments
"Dig a Hole in the Ground With a Grave For Your Camera"
Thank catnip there are archives backed up.
1. Extract the downloaded archive into a folder
2. Open CAO
3. Click on open directory and navigate to the extracted mod
4. Run CAO (make sure the option: necessary optimizations is checked under the animation tab)
5. Add the mod folder back to an archive
6. Install manuallly
7. Run NEMESIS
2. Can I have the file
EDIT: Got it working in a simpler way.
navigation
1) install SKYUI
2) Install FNIS
3) Install FNIS PCEA 2
4) Navigate to \SteamLibrary\steamapps\common\Skyrim Special Edition\Data\Meshes\actors\character\animations\FNIS_PCEA2
or \SteamLibrary\steamapps\common\Skyrim\Data\Meshes\actors\character\animations\FNIS_PCEA2
5) Create a new folder called 2KISS(or what ever you want but it must have the 2 at the start!!!) in the above directory
*open this folder and do not close it you need this location for drag and drop*
*For Skyrim LE*
6) MANUALY Download this mod(KISS) "full version", open the RAR and inside you will see the (Meshes) folder, open it
then open (actors), then (charachter). here u will see (animations) and (Behaviors) folders.
7) Open the (Behaviors) folder put the "sprintbehavior.hkx" file in the 2KISS folder you made above. (Do Not CLose The
"KISS RAR" window. go back to where you see (animations) and (Behaviors) folders.
8) Open the animations folder, ingnore the (female) and (male) folders. highlight and move all the other files in the
"2kiss" folder. Now *choose only *1* (female) or (male) *wich do u play as in game*. open the corresponding folder and
move the hkx to the "2KISS' folder.
9) now run GenerateFNISforUsers.exe
10) start skyrim(launch SKSE), load what ever save or new game, go to the MCM menu, find FINS PCEA2 select KISS ALSO
MAKE SURE THAT (xp32_new_anim_pack) IS *NOT* CHECKED** select "Refresh PCEA2 animations NOW" close MCM
(and maybe deselect other animations) IF something is not working.
This should get this working, it works for me. *SOME ANIMATION MODS WILL NOT APPEAR IN MCM UNDER FNIS PCEA. IF THEY
ALTER ANY OF THE ANIMATIONS THAT KISS DOES THEN SOMETHING MAY NOT WORK DUE TO CONFLICTS.*
*For Skyrim SE*
6) MANUALY Download this mod(KISS) "full version", open the RAR and inside you will see the (Meshes) folder, open it
then open (actors), then (charachter). here u will see (animations) and (Behaviors) folders.
7) Open the (Behaviors) folder put the "sprintbehavior.hkx" file in the 2KISS folder you made above. (Do Not CLose The
"KISS RAR" window. go back to where you see (animations) and (Behaviors) folders.
8) Open the animations folder, ingnore the (female) and (male) folders. highlight and move all the other files in the
"2kiss" folder.
9) You will need to follow this guide https://www.nexusmods.com/skyrimspecialedition/mods/2970
BUT put "converttoskyrimSE.bat" and "HavokBehaviorPostProcess.exe" in the 2KISS folder!
You may also need to run "converttoskyrimSE.bat" as an administrator!
10) now run GenerateFNISforUsers.exe
11) start skyrim(launch SKSE), load what ever save or new game, go to the MCM menu, find FINS PCEA2 select KISS ALSO
MAKE SURE THAT (xp32_new_anim_pack) IS *NOT* CHECKED** select "Refresh PCEA2 animations NOW" close MCM
(and maybe deselect other animations) IF something is not working.
Thanks @ Zero_Ryoko for your comment to help me make this.
The only instruction I'm not perfectly clear on is the link where it says "4. Run this file through Nexus Mod Manager picking which Animations you want". I assume adding the files to the kiss folder is what this would mean but not sure so this could be what is screwing it up.