Incredible. I was so upset when I saw the art style of the gen 4 remakes. I genuinely can't stand that lamentably common 3D-chibi art. It's some kind of pathological aversion I think, it just hurts to look at haha. I might actually play the remakes with this mod!
I would recommend mixing the files rather than doing a separte directory only becuase I haven't tested the other method at all, but not I don't believe that is the issue. It shouldn't be too long, maybe a second or two longer but that's all I've experienced. The reason it happens though is because the overworld loads a ton more models and there are 150+ models being added to the game. I've compressed the files as much as is possible but overall that's just the state of redoing the characters from an entire game.
1. You can use Brilliant Diamond or Shining Pearl to play this game. Read the mod details page for instructions. 2. I have never made a trailer for this so my assumption is that you’re referring to Pokemon Re:Lumi (Also called luminescent 3.0.) which isn’t out yet. 3. If you are talking about this mod (which I don’t know where you might have seen a trailer for this) I do have ≈370 models that you can use, you’ll just have to actually look at the instructions for that.
https://youtube.com/shorts/jEsNKoG4yMg?si=BqJnw9TZWxslKRAs here its shown that you can customise character from any design given but i only get M.Cs boys and girls of differnt game
Yeah, but if you go read pretty much anything on my documents page you would have found the information you're looking for. My mod is built ON Luminescent Platinum. It will update it. You are trying to play the base mod. Follow the link below.
DEVILLORD1234: Make sure you’re following the instructions on the main page. I know it works for sure, but it may take trying again. You should have a clean import of Lumi installed and then you need to place the Dechibified file in. It is meant to overwrite the Luminescent Platinum files and modify the mod. If you DON’T want Dechibified then just use Luminescent Platinum and don’t add Dechibified.
If you’re looking for the combination of the outfits in Luminescent and Dechibified platinum, they are currently not available. Those are the final step in the road map.
Dinmyr: I literally said that but if you’re willing to get on and make a mountain out of a mole hill then yes, it is completed. I have 100% Dechibified Pokemon Platinum. That’s what the base files are and it has all the protagonists from gen 1-9 pre installed.
Now I am adding an extra 700+ models for people to use. Technically this is a separate project that is maintained within the optional files. Hence, it is only “not-completed” based on what you want the definition to be: The starting goal or the evolved goal.
Idk if there is something I just haven't noticed but only the playable character is not chibi anymore. The NPCs are still chibi, help???
Edit: Now it's just Barry being a chibi, everyone else is dechibified. I'm being haunted by chibi Barry
Edit 2: I'm using the coronet version of this mod, everyone stayed chibi so I grabbed the main file, then everyone aside from Barry dechibified. What can I do to stop being haunted by this little gremlin T_T
I haven’t tried the coronet version for a while, but I can look into it later today. I would recommend a fresh install though. Delete the romfs and ExeFS folders (don’t delete your saved files) and then reinstall Lumi/coronet and Dechibified.
Okay, so I've tested this various times and still haven't encountered the Barry issue in either Dechibified Lumi or Dechibified Coronet. I'm uploading a new version that's barely an update with a single file change, but you can check to see if that helps. Otherwise, I'm not sure what to tell you. Make sure you're following the instructions for adding the mod.
1. Download Coronet Platinum. 2. Put it in your mod folder. 3. Download Dechibified Platinum v1.0.5b - Coronet 1.1. (Has been uploaded.) 4. Open Dechibified Platinum v1.0.5b - Coronet 1.1 and move or copy the romfs INTO the Coronet Platinum mod. Replace all.
is the game complete will it work on ryunjx or yuzu and what's its steps , )fan fav pokegirls Cynthia misty Clair Sonia , and ash Ketchum model can they be added as characters , cynthia one is easily findable on internet )
Seriously, look at the description page. I already added Cynthia. I added 10 versions of her. Heck, every one of your questions is on the description page or on a link from the description page.
---- FIXED, see the end of the comment in case you had my same problem---- Hello dude, first let me thank you for your hardwork, i can't make the mod work yet but i've seen it from other videos and it looks AMAZING, so much that it made me want to replay luminescent platinum which i dropped in the past^^ As i said before tho somehow i think i've made a mistake in the installation cause the mod doesn't work, i installed Dechibified Platinum v1.0.5a - Lumi 2.1 and took your mod directory (unzipped of course) and pasted it into lumi 2.1 F directory in the mod folder of the game; i saw some answers you gave to other comments and i didn't copy-paste the romfs of your mod into the romfs of lumi, but like i read from your answers i just copy-pasted the entire mod folder into the lumi folder, it didn't ask me to swap anything tho, it just added the files. I also previously tried to copy the romfs files of your mod into the romfs of lumi but after doing so the game didn't load and ryujinx (ver ldn 3.1.3) was freezing and the console prompt was full of red codes so i basically deleted the lumi mod from the mods folder and put it back again, and then tried like i read from you but with no change in chibi models. Sorry for the long comment, wanted to give you as many details as i could so it could be easier and faster to fix it, i know you're busy so take your time, i can wait and thanks in advance for the help and the mod! ^^ Edit-> i fixed it and i feel dumb, it was easier than i expected... my mistake was that i tried to copy the dechibified mod INTO the lumi mod, i just had to put it in the mod folder of the game, not into the lumi directory, but in the same mod directory that the lumi mod was. Now i can see those beautiful grown ass models and not those damn chibis, and again thank you so much for the mod!
I don't know if anyone else has experienced this, but I get much longer load times going between buildings and the town with this mod loaded. Just FYI.
Did you update from 1.0.4a to 1.0.5a or is this the first time you’ve added this mod? Also, do you have any other mods? Also, what are you playing on? Switch, Ryujinx, Yuzu, Steam Deck Emulator?
Don't mind Red being the default, but it looks like her Platinum outfit is missing from your files and spreadsheet. Is there a way to get the Platinum outfit model that came with BDSP back in the game with this mod?
193 comments
is this the case or can it be corrected?
I have installed it in a separate directory from Lumi (is this ok or should I put it inside the Lumi folder? it works fine apparently).
thanks for the work by the way!
I’m still working on adding about 450+ models, so it’s not “complete”.
OR ANY OTHER GAME TELL ME
If you’re looking to use base Brilliant Diamond or Shining Pearl, use the file called base BDSP.
1. You can use Brilliant Diamond or Shining Pearl to play this game. Read the mod details page for instructions.
2. I have never made a trailer for this so my assumption is that you’re referring to Pokemon Re:Lumi (Also called luminescent 3.0.) which isn’t out yet.
3. If you are talking about this mod (which I don’t know where you might have seen a trailer for this) I do have ≈370 models that you can use, you’ll just have to actually look at the instructions for that.
here its shown that you can customise character from any design given but i only get M.Cs boys and girls of differnt game
Luminescent Platinum at Pokemon Brilliant Diamond and Shining Pearl Nexus - Mods and community
Make sure you’re following the instructions on the main page. I know it works for sure, but it may take trying again. You should have a clean import of Lumi installed and then you need to place the Dechibified file in. It is meant to overwrite the Luminescent Platinum files and modify the mod. If you DON’T want Dechibified then just use Luminescent Platinum and don’t add Dechibified.
If you’re looking for the combination of the outfits in Luminescent and Dechibified platinum, they are currently not available. Those are the final step in the road map.
Dinmyr:
I literally said that but if you’re willing to get on and make a mountain out of a mole hill then yes, it is completed. I have 100% Dechibified Pokemon Platinum. That’s what the base files are and it has all the protagonists from gen 1-9 pre installed.
Now I am adding an extra 700+ models for people to use. Technically this is a separate project that is maintained within the optional files. Hence, it is only “not-completed” based on what you want the definition to be: The starting goal or the evolved goal.
Edit: Now it's just Barry being a chibi, everyone else is dechibified. I'm being haunted by chibi Barry
Edit 2: I'm using the coronet version of this mod, everyone stayed chibi so I grabbed the main file, then everyone aside from Barry dechibified. What can I do to stop being haunted by this little gremlin T_T
1. Download Coronet Platinum.
2. Put it in your mod folder.
3. Download Dechibified Platinum v1.0.5b - Coronet 1.1. (Has been uploaded.)
4. Open Dechibified Platinum v1.0.5b - Coronet 1.1 and move or copy the romfs INTO the Coronet Platinum mod. Replace all.
That should be it.
Ignore this post.
Response in wrong locationHello dude, first let me thank you for your hardwork, i can't make the mod work yet but i've seen it from other videos and it looks AMAZING, so much that it made me want to replay luminescent platinum which i dropped in the past^^
As i said before tho somehow i think i've made a mistake in the installation cause the mod doesn't work, i installed Dechibified Platinum v1.0.5a - Lumi 2.1 and took your mod directory (unzipped of course) and pasted it into lumi 2.1 F directory in the mod folder of the game; i saw some answers you gave to other comments and i didn't copy-paste the romfs of your mod into the romfs of lumi, but like i read from your answers i just copy-pasted the entire mod folder into the lumi folder, it didn't ask me to swap anything tho, it just added the files. I also previously tried to copy the romfs files of your mod into the romfs of lumi but after doing so the game didn't load and ryujinx (ver ldn 3.1.3) was freezing and the console prompt was full of red codes so i basically deleted the lumi mod from the mods folder and put it back again, and then tried like i read from you but with no change in chibi models. Sorry for the long comment, wanted to give you as many details as i could so it could be easier and faster to fix it, i know you're busy so take your time, i can wait and thanks in advance for the help and the mod! ^^
Edit-> i fixed it and i feel dumb, it was easier than i expected... my mistake was that i tried to copy the dechibified mod INTO the lumi mod, i just had to put it in the mod folder of the game, not into the lumi directory, but in the same mod directory that the lumi mod was. Now i can see those beautiful grown ass models and not those damn chibis, and again thank you so much for the mod!
I have not exported/rigged the original models to be Dechibified. That is at the end of the roadmap.