Yeah the reason why the bloom is so strong is because, the enb was too dark without the bloom effect, thanks for the tip though. I would use Reshade, but I have never tried it.
if it to dark remove eye adaption or under Color Correction you can find a gamma spinner. the gammer spinner affect DNI (Day/Night/Interio) Bloom is always a bad idea it blur to heavy . gaussian do almost the same it can hide low res texture without to make everything bright or look unrealistic
just a example from my NV ENB [ENVIRONMENT] LightingIntensityDay=1.2 (will make everthing brighert which need a light source) LightingIntensityNight=1.25 (will make everthing brighert which need a light source) LightingCurveDay=0.6 (fine tuning) LightingCurveNight=0.4 (fine tuning)
AmbientLightingIntensityDay=0.7 (will make everthing brighter which dosent need a light source) AmbientLightingIntensityNight=1.0 (will make everthing brighter which dosent need a light source) AmbientLightingCurveDay=0.25 (fine tuning) AmbientLightingCurveNight=1.0 (fine tuning)
LightingIntensityInterior=0.41(will make everthing brighter which need a light source) LightingCurveInterior=1.73 (fine tuning)
AmbientLightingIntensityInterior=0.8 (will make everthing brighter which dosent need a light source) AmbientLightingCurveInterior=1.02 (fine tuning)
I don't recommend reshade, in my experience even if installing via instructions its such a gateway to a broken game, even if not indirectly caused by new vegas itself. hell the last time i tried reshade it worked, then windows update came along and it never worked right since - im not even making that up
What SamuelOlson1701 said is true. Also you should never combine Reshade with ENB, it will kill your FPS by a lot especially if the game is 32-bit. From my experience, I go from 80 FPS with an ENB, but once Reshade is installed with it I will get 30-40. Sweetfx does something simillar but I've only noticed a 10-20 FPS loss with Sweetfx and I have a good PC GTX 1080 GPU, i7 CPU. I don't know what the creators of Resahde did but once it went to Resahde version 3, it's just been a performance killer.
i agree to but it the same about ENB. Reshade and ENB use a dll plugin. you can disable all effect but it will coast fps. try it. test fps without the dll and only dll without effect you will notice a huge performance different
2x i9 4x Titan Rtx dropp from 140 to ca 90 just with the dll
dosent matter which effect i enable. i loose maybe 2 fps
so from what i understand this rich human whom i envy very much right now says use the .dll but take out the effects? or keep the effects but dont use the .dll? maybe im not understanding that right, but, what?
well english is not my native language. just to load the dll without effect will coast performance
have nothing to do with rich. even on my second pc with i5 9400 and a 1070 i get the same result my last pc with Pentium G5400 and a 1070 have too the same result
I can see why everyone is saying don't try Reshade, and I get it. I have tried reshade before (worst thing i ever did to my game) It just does not work.
i get never a problem with reshade but you dont need to use it. your problem is other if you have problem with brightniss
higher values for brightniss [COLORCORRECTION] GammaCurve=1.0
[ENVIRONMENT] LightingIntensityDay=1.2 (will make everthing brighert which need a light source) LightingIntensityNight=1.25 (will make everthing brighert which need a light source) LightingCurveDay=0.6 (fine tuning) LightingCurveNight=0.4 (fine tuning)
AmbientLightingIntensityDay=0.7 (will make everthing brighter which dosent need a light source) AmbientLightingIntensityNight=1.0 (will make everthing brighter which dosent need a light source) AmbientLightingCurveDay=0.25 (fine tuning) AmbientLightingCurveNight=1.0 (fine tuning)
LightingIntensityInterior=0.41(will make everthing brighter which need a light source) LightingCurveInterior=1.73 (fine tuning)
AmbientLightingIntensityInterior=0.8 (will make everthing brighter which dosent need a light source) AmbientLightingCurveInterior=1.02 (fine tuning)
12 comments
just a example from my NV ENB
[ENVIRONMENT]
LightingIntensityDay=1.2 (will make everthing brighert which need a light source)
LightingIntensityNight=1.25 (will make everthing brighert which need a light source)
LightingCurveDay=0.6 (fine tuning)
LightingCurveNight=0.4 (fine tuning)
AmbientLightingIntensityDay=0.7 (will make everthing brighter which dosent need a light source)
AmbientLightingIntensityNight=1.0 (will make everthing brighter which dosent need a light source)
AmbientLightingCurveDay=0.25 (fine tuning)
AmbientLightingCurveNight=1.0 (fine tuning)
LightingIntensityInterior=0.41(will make everthing brighter which need a light source)
LightingCurveInterior=1.73 (fine tuning)
AmbientLightingIntensityInterior=0.8 (will make everthing brighter which dosent need a light source)
AmbientLightingCurveInterior=1.02 (fine tuning)
2x i9 4x Titan Rtx dropp from 140 to ca 90 just with the dll
dosent matter which effect i enable. i loose maybe 2 fps
have nothing to do with rich. even on my second pc with i5 9400 and a 1070 i get the same result
my last pc with Pentium G5400 and a 1070 have too the same result
[PROXY]
EnableProxyLibrary=true
InitProxyFunctions=false
ProxyLibrary=Reshade.dll
i get never a problem with reshade but you dont need to use it. your problem is other if you have problem with brightniss
higher values for brightniss
[COLORCORRECTION]
GammaCurve=1.0
[ENVIRONMENT]
LightingIntensityDay=1.2 (will make everthing brighert which need a light source)
LightingIntensityNight=1.25 (will make everthing brighert which need a light source)
LightingCurveDay=0.6 (fine tuning)
LightingCurveNight=0.4 (fine tuning)
AmbientLightingIntensityDay=0.7 (will make everthing brighter which dosent need a light source)
AmbientLightingIntensityNight=1.0 (will make everthing brighter which dosent need a light source)
AmbientLightingCurveDay=0.25 (fine tuning)
AmbientLightingCurveNight=1.0 (fine tuning)
LightingIntensityInterior=0.41(will make everthing brighter which need a light source)
LightingCurveInterior=1.73 (fine tuning)
AmbientLightingIntensityInterior=0.8 (will make everthing brighter which dosent need a light source)
AmbientLightingCurveInterior=1.02 (fine tuning)