Like this a lot. The increase in power is subtle, yet notable. It pulls a trailer full of wood uphill with much more ease. Looks good as well, and I always love the whistling of a turbocharger. I was hoping for a tiny bit more top speed, though.
rear was 1.2f, 1.05f, 1.05f front 0.9f, 0.75f, 0.75f also changed radius so it doesn't float/sink rear radius 0.825f front 0.575f because of smaller wheels speed will be lower
I see. does the tractor lean back like i said or is that just the trailer? Although the lean looks small enough I might tolerate it. Looks really good with the tire sizes listed and etc and once i stop being lazy im definently gonna add that. This is why i love letting people experiment, great job with it.
Nope. The tire size is the tire size you get taken from real life valmet tire heights ingame. The problem with the fenders and etc which i assume is why this is mentioned, is due to the fact that the tractor has no rear suspension and id have to edit the body.
well 602 also came with same tire sizes as 502 also 602 had rear wheel drive only models and i see that rear tires are too narrow maybe work in row crop which are changed when doing rowcrop work and changed to standard wider when doing other work.
You're right about the tires. The issue is the kekmet has no suspension ingame so this was kind of a work around. The rear tires are skinnier than they should be upon further inspection however. The 502 for the 75 model year is 14,9-30 tire size, while the 602-t is 13,6-36. so technically i need to widen them by 20% if the 2nd number is width
95 comments
press clutch properly
press the gas pedal and make sure you reached high rpms or engine screams.
release clutch.
here you go
and i recommend these two mods.
kekmet 602T-V2
Kekmet v8
install all these mods and you will have ultimate kekmet
Based on https://agro-specs.com/images/13416_2.jpg or https://agro-specs.com/images/13416_3.jpg
because of smaller wheels speed will be lower