this is just a PA guys. if youre using the active effect on hud mod, you may have seen its squeezed to a tiny paste. thats due to the fact that AEoHUD depends on the size of the crosshair. if you know what youre doing you can just resize the crosshair setting in the fallui settings back to 100%. its defaulted to 30%. i suggest for a relatively small hud, try 70% but no more smaller than that. around 70~80% was my sweet spot on a 1600x1000 resolution
Yo dude, great mod! Do you know what's causing this? I tried your HUD and the result is this even with the Toounx Ammo UI MCM configuration, please help :).
if someone hud word become square,you can change the font ,in fallui hud >layout >text>font.THE BEST hud This should not be hindered, and more people should know about it.
Chinese : 在Fall Ui里的布局选中变为方块的部分，在有文本选项的下方有字型选择（几乎所有带文本地方都得弄一次）
Ive been trying to sort this problem for a couple of days now. Thank you for your post! Not sure if FallUI had a recent update, but to change the overall font, i had to go to FallUI > Layout > Layout settings > then change the overall font. I had no idea if i could do it or not, but your post helped me figure it out. So thank you!
Using a translator Hello, thank you for your great work. Do you know the reason why my Condition Boy doesn't appear? I downloaded the Condition Boy version and have already installed Condition Boy.
HI! This is a very great mod,dude.I like it very much. Please help me to get two answers, 1. this mod doesn't show the "Holo Time"in the game ,Here's the links: https://www.nexusmods.com/fallout4/mods/20300. 2.where did i download the AMMO WEAPON UI? can u give a link for me? Thanks very much!
Hi friend, long time don't use FO4 so I try to remember but it's not sure. In fall-ui HUD, select a layout (1,2 or 3) BEFORE import and save settings. Change layout, and import other settings.
This is obviously my personal favorite hud by far. However there's two things disappeared from vanilla hud: (I don't know if these are glitches tho)
1) No NESW direction in the compass. It's hard to locate which direction I'm going. 2) No obtained objects counts were shown. For example, If I loot nine of 10mm ammo, It shows only "10mm" instead of "10mm (9)".
I got interested in your HUD mod since it offers a lot of features and also compatible with Tooun's Ammo and Weapon UI. Since I already have the other requirements, I opted to install your mod.
Regarding the installation, I followed it to the letter however, I'm a bit confused with this:
"2) For Ammo&weaponUI, after my preset install MCM value is lying. You just need to add and remove 1, on each value of the MCM to set it effective."
When you mentioned, just add and remove 1, as an example did you mean it this way:
185 => 85 or 185 => 184 or 185 => 186?
I tried everything, but the Ammo&UI is still not showing up, even when your preset has been installed and applied. Also did saving and reloading, turning the mod "OFF" and saving, reloading, turned "ON" again, saving and reloading still it won't show. Weapon and grenades has been hidden through MCM HUD layout.
Here's hoping you can help me here. Thanks and best regards.
It is not necessarily +1 -1 or +100 -100, just modify each value and put them back to bring up the elements of the HUD (so +1 -1 with mouse click in your mcm setting remains the simplest).
If I understand correctly (I use Google trad), AmmoUi does not activate even before installing my preset, so there must be a problem of requirements or conflict somewhere with AmmoUi.
In case AmmoUi worked before :
Spoiler:
Show
if it received an update, it is possible that my preset file no longer works today. Perhaps it is best to uninstall it, and copy the values manually in the original settings into the mcm.
Thanks for your reply and clarification on what exactly to do. If in case, no positive results remain even after doing as per your instruction (simply +1 then -1 on each values in the mod's MCM setting to revert to the actual setting), I might just uninstall said mod as suggested to avoid further headaches.
After all, your HUD mod looks pretty sleek on its own.
Thanks for your time on this, stay safe and best regards. ENDORSED!!!
46 comments
Yo dude, great mod! Do you know what's causing this? I tried your HUD and the result is this even with the Toounx Ammo UI MCM configuration, please help :).
1) IMAXHUD fit with your HUD game setting color. Turn in white (R255 G255 B255) in your game general setting.
2) For Ammo&weaponUI, after my preset install MCM value is lying.
You just need to add and remove 1, on each value of the MCM to set it effective.
3) Go to fallUI - HUD, select used layout, and hide grenade and Ammo.
This should not be hindered, and more people should know about it.
Chinese :
在Fall Ui里的布局选中变为方块的部分，在有文本选项的下方有字型选择（几乎所有带文本地方都得弄一次）
Hello, thank you for your great work.
Do you know the reason why my Condition Boy doesn't appear? I downloaded the Condition Boy version and have already installed Condition Boy.
This is a very great mod,dude.I like it very much.
Please help me to get two answers, 1. this mod doesn't show the "Holo Time"in the game ,Here's the links: https://www.nexusmods.com/fallout4/mods/20300.
2.where did i download the AMMO WEAPON UI? can u give a link for me?
Thanks very much!
Don't know if it's a conflict with anything for holotime but try holotime2 : https://www.nexusmods.com/fallout4/mods/22372
For ammo weapon UI, it's a paywalled patreon mod:
https://www.patreon.com/posts/ammo-weapon-ui-47564293
Do you have this in your condition boy mcm settings?
It's inside the menu if you scroll down normally.
If you don't have them, it's because there's a problem with Condition Boy.
As I've got another 2 presets that i'd like to switch between!
In fall-ui HUD, select a layout (1,2 or 3) BEFORE import and save settings.
Change layout, and import other settings.
(I don't know if these are glitches tho)
1) No NESW direction in the compass. It's hard to locate which direction I'm going.
2) No obtained objects counts were shown. For example, If I loot nine of 10mm ammo, It shows only "10mm" instead of "10mm (9)".
Thank you for the hud anyway.
I got interested in your HUD mod since it offers a lot of features and also compatible with Tooun's Ammo and Weapon UI. Since I already have the other requirements, I opted to install your mod.
Regarding the installation, I followed it to the letter however, I'm a bit confused with this:
"2) For Ammo&weaponUI, after my preset install MCM value is lying.
You just need to add and remove 1, on each value of the MCM to set it effective."
When you mentioned, just add and remove 1, as an example did you mean it this way:
185 => 85 or 185 => 184 or 185 => 186?
I tried everything, but the Ammo&UI is still not showing up, even when your preset has been installed and applied. Also did saving and reloading, turning the mod "OFF" and saving, reloading, turned "ON" again, saving and reloading still it won't show. Weapon and grenades has been hidden through MCM HUD layout.
Here's hoping you can help me here. Thanks and best regards.
It is not necessarily +1 -1 or +100 -100, just modify each value and put them back to bring up the elements of the HUD (so +1 -1 with mouse click in your mcm setting remains the simplest).
If I understand correctly (I use Google trad), AmmoUi does not activate even before installing my preset, so there must be a problem of requirements or conflict somewhere with AmmoUi.
In case AmmoUi worked before :
Thanks for your reply and clarification on what exactly to do. If in case, no positive results remain even after doing as per your instruction (simply +1 then -1 on each values in the mod's MCM setting to revert to the actual setting), I might just uninstall said mod as suggested to avoid further headaches.
After all, your HUD mod looks pretty sleek on its own.
Thanks for your time on this, stay safe and best regards. ENDORSED!!!