I've completed all of the vault quest and into chapter 2 of SS2, problem I'm having is that the beacon won't shut off, when I do shut it off I get the message "it won't work without power" so I leave thinking that it is off but yet settlers just keep coming, it currently has 40+ settlers with no way to stop it, I'm just done and over it. Going to tear it all down.
Edit in; I may have misspoke, I had tinkered with my charisma raising it via "Setav" console command but I had both NPC and recruitment settings to on via the SS2 manager desk and thought they would override my charisma, maybe I need to go into mod manager and make changes there.
just doesn't show up as an available plan at all, tried everything google/nexus/ss2 forums can suggest, nothing works.
EDIT: found a way to "fix" it, not limited to just this city plan: 1. start up a save file that doesn't have this or the city plans you wanna use. Turn off building limits for city plans in City Manager holotape options 2. refresh building plans, save game, close game. 3. enable the mod that contains the city plan you want to use, then check the City Plans list on the city manager's desk. It won't be there. 4. open up city manage holotape again, refresh building plans. 5. it's there now
So I completed the starter quests then built the plan and everything was working fine for a while, noticed a few areas had multiple of the same build items in one spot near the entrance area and cleaned it up a bit. Progressed the quests further a bit passed the bike experiment stuff and some upgrades happened while I was gone and they got successfully attacked by raiders and now every time I go back to the vault it doesn't CTD immediately but after I'm there about 30-60 seconds it eventually CTDs me, any ideas?
Guessing I'll just be giving up vault 88 for this playthrough unless I have enough time to build the planning table and scrap everything before the CTD which I'm not actually clear how do do exactly or if its possible in time. But it would be more ideal if I could fix it outright, I'll just science it in a new playthrough at some point with console commands to get there instantly if I can't though no shot I would be doing vault 88 without a working SS2 plan anyway the building system is just frustrating to me and this one was perfect until things broke. I did manually add some power and water maybe that's what screwed things up because the upgrades placed things over them? idk.
Have a seriously newbie question. I loading the city place and it started, but eventually stopped. (crates everywhere and half finished) I cannot find Borstow anymore and every time I try to start the Vault 88 radio beacon I get "This cannot start without power" But I cannot wire it up to any generator?
I am completely at a loss to what to do next? Now in regular settlements I can place a recruitment beacon down (but this is an outside thing). I have no idea what to do next?
Oh, and also I still have the mission to create an Overseeer's desk even though the city place has one?
I'm probably missing a step somewhere but I can't pull this plan up at the desk. I only see the default one that shipped with Sim Settlement's 2. Is there an extra step for making mod downloaded layouts appear to be selected besides just installing through mod organizer? I checked the forums and the wiki but came up blank.
Hi sorry, i've been busy with irl things and haven't been checking my nexus often. If you are still having this issue and want to tag me on the SS2 forum I'll try and help. @Blackbelt
i like this plan. it works...now. explanation; i told the overseer that i would never work with vault-tec and then got message to dismiss. (i get muscle spasms in my fingers and accidently sent her packing right from the get go) so i did No quests or cleaning. went right to 'building' , made desk ,chose this plan and boom. the structures and crates start popping into place, however NONE of the scrap was removed. so it looked like a disaster. i had to go thru the whole build later and carefully scrap what i thought was not part of the build. messy. don't know where the bug came in. from my error or from the mod. it seems okay now but i have not updated with this latest .. so just a heads up
Sorry for the late response, if that issue occurs again and again it is likely an issue with the scrap profile for this settlement either on my end or with the plugin we use to make plans. Hopefully it was just a one time bug, sorry you experienced it.
hi there i am trying your vault 88 city plan but cant see it listed, i just cleared the one i had the default one. i cleared it out destroyed etc. when i go to choose a city plan option when i go next etc to see other plans listed besides the default one thats there i cannot see yours for some reasons. i can see its installed and not disabled anyway etc in my plugins. do i need to leave the vault and return is there something im missing keen to try yours out very much
I think you borked it further with this update Blackbelt16. :<
Plan was working for me, did the update when I saw it come up in vortex, had to replace plan because the old one was not recognized: now it just sets the vault back to its original and then does nothing. refreshing, replacing, removing plan and adding this back: none of them do anything I'm afraid.
Hmmm okay, I'll just revert to the 1.0.0 as the main file. The scripting update in city plans that caused me to update them isn't a must have thing and I don't have the personal time to figure out why these updates are breaking it. Thanks for letting me know!
Give Feedback
37 comments
1.0.2 file should be esl now, hopefully the build issues should also be resolved.
So that doesn't seem to have changed anything, just reverting the main file back to the old 1.0.0 file for now until I can figure out what is wrong.Edit in; I may have misspoke, I had tinkered with my charisma raising it via "Setav" console command but I had both NPC and recruitment settings to on via the SS2 manager desk and thought they would override my charisma, maybe I need to go into mod manager and make changes there.
EDIT: found a way to "fix" it, not limited to just this city plan:
1. start up a save file that doesn't have this or the city plans you wanna use. Turn off building limits for city plans in City Manager holotape options
2. refresh building plans, save game, close game.
3. enable the mod that contains the city plan you want to use, then check the City Plans list on the city manager's desk. It won't be there.
4. open up city manage holotape again, refresh building plans.
5. it's there now
Guessing I'll just be giving up vault 88 for this playthrough unless I have enough time to build the planning table and scrap everything before the CTD which I'm not actually clear how do do exactly or if its possible in time. But it would be more ideal if I could fix it outright, I'll just science it in a new playthrough at some point with console commands to get there instantly if I can't though no shot I would be doing vault 88 without a working SS2 plan anyway the building system is just frustrating to me and this one was perfect until things broke. I did manually add some power and water maybe that's what screwed things up because the upgrades placed things over them? idk.
I loading the city place and it started, but eventually stopped. (crates everywhere and half finished)
I cannot find Borstow anymore and every time I try to start the Vault 88 radio beacon I get "This cannot start without power"
But I cannot wire it up to any generator?
I am completely at a loss to what to do next?
Now in regular settlements I can place a recruitment beacon down (but this is an outside thing). I have no idea what to do next?
Oh, and also I still have the mission to create an Overseeer's desk even though the city place has one?
First do ALL the Vault 88 quests, complete them THEN start the city plan (also scrapping EVERYTHING)
don't know where the bug came in. from my error or from the mod. it seems okay now but i have not updated with this latest .. so just a heads up
i can see its installed and not disabled anyway etc in my plugins. do i need to leave the vault and return is there something im missing
keen to try yours out very much
Plan was working for me, did the update when I saw it come up in vortex, had to replace plan because the old one was not recognized: now it just sets the vault back to its original and then does nothing. refreshing, replacing, removing plan and adding this back: none of them do anything I'm afraid.