155 comments

  1. slavomirperun
    slavomirperun
    • premium
    • 47 kudos
    Locked
    Sticky
    New ESL version, the form ID where changed, needs new game or game where it was not used! Don't update.
  2. Malistroth
    Malistroth
    • member
    • 16 kudos
    Locked
    Sticky
    Will it not conflct with the BoS vertibird which takes you to Mass Fusion?
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      No, all good. My vertibird is temporary disabled then.
  3. LtPaladinKells1337
    LtPaladinKells1337
    • member
    • 1 kudos
    In the Parking House on the Airport the cars and Rubel is bolcing me to get on top ?
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Parking house is not restored, use the stairs in back to go the top.
  4. DBZWarrior360
    DBZWarrior360
    • premium
    • 18 kudos
    I'm having an issue with the mod. The cars just won't vanish. I've moved the mod all the way to the bottom of my load order, and they just won't vanish. Manually disabling them doesn't seem to work either. The console tells me it's "not a valid behavior and will be ignored."
     
    This is the image proof here.
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      That is not my mod, what edits last the cars. Ask on discord what to do with the FOLIP edits. Manual disable will not work. My mod is is not last, don't know how you have your setup. Could be also different mod, check with xedit to see what mod is the last editing airport.

      FOLIP

      I have it like this and works fine for me. My load order

      You can try to disable my mod, save, enable my mod back.
    2. DBZWarrior360
      DBZWarrior360
      • premium
      • 18 kudos
      Do you use the Fallout 4 Unofficial Patch?
    3. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Yes, I use the Unofficial patch.
  5. xomutt
    xomutt
    • member
    • 3 kudos
    Hello
    Are you planning a similar rework for Prydwen?
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Hi,
      I use this one https://www.nexusmods.com/fallout4/mods/24198, If there is more interest I can take a look.
    2. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Will rework Prydwen and add it as separate ESL to his mod. This mod could be made as ESL too, need to test that.
    3. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Almost done with the Prydwen. Doing some testing and fine tuning.
    4. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Prydwen mod is done testing ESL version and converting Airport to ESL. I hope to release it on this Sunday.
  6. hey man, really like the look of this mod and plan to use it.

    just a couple questions - im currently in the process of adding mods and doing test runs, and with this modi spawned in a new character and ran all the way to boston airport to see if there are any changes yet, there are. but some of the environments are messed up in the area like missing walls on top of the car park and invisible holes in the floors.

    im just wondering is this expected to be the case as the brotherhood havent showed up in that area yet due to me just starting the game and obviously not having done fort hagen to trigger the brotherhood and prydwen showing up just yet, basically will it be fine once the brotherhood are there for the mod to actually take effect. many thanks in advance.

    P.S the same goes for fort strong as im aslo play testing your fort strong redux mod.
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Hi, all precombines/previs was generated so there is some mod conflict, try to check with xedit and adjust loading order.
      Doesn't matter if Prydwyn or BoS are in Commonwealth. You should not have any visual issues that you described.
  7. william09703
    william09703
    • member
    • 6 kudos
    sorry for a question might be unrelating, but are those additional sentry bots lacking something in record that vanilla one would have? cuz I am trying to change their hand weapon myself, but the changes have no effect even after refreshing them
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Sentry bots are from this mod, I only adjusted some parameters. They don't have any templates but use vanilla records.
      They have Bot_HandRightMiniGun and Bot_HandLeftMiniGun change those object mods to different it should work.

      In CK no issue after changing weapons, it shows the new weapon.
    2. william09703
      william09703
      • member
      • 6 kudos
      that's weird, those two mods are exactly what I changed. But it has no effect somehow. I also tried to add shoulder launcher parts to the one patrolling the outside of airport, doesn't work either
    3. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      The NPC data is in save file, when I tried clean save changes worked. You can try disable mod, save and enable like when upgrading.

      https://imgur.com/a/8u37Uru

      One remark, if you use the BoS Sentry Paint patch you need to change them there.
    4. william09703
      william09703
      • member
      • 6 kudos
      it works now! thanks for explanation
    5. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Glad I could help, enjoy!
  8. epicman32232311
    epicman32232311
    • member
    • 0 kudos
    The wall behind where Liberty Prime is worked on is invisible when I disable the mod it is not. Are there any fixes?
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Those previs changes are not in save file, when you disable my mod. Some other mod is doing that, check with xedit what else edits the airport cells.
  9. TheZeroGeass
    TheZeroGeass
    • member
    • 1 kudos
    Excuse me but how can I make it clean like picture number 7 and 8? Do I need PRP version too?
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      No need for PRP, try to move my mod lower in your load order. Airport is cleaned once Prydwen arrives.
    2. TheZeroGeass
      TheZeroGeass
      • member
      • 1 kudos
      I try put it as the lastest in load order but it still the same as before. Very confused now XD
    3. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Check with xedit what is the last mod that overwrites airport. Try disable / enable my mod. If you use PRP, you need my PRP patch.

      Version 2.0 has all trash, only 2.1+ has no trash, are you using 2.2? I see that you downloaded last 2.0.
    4. TheZeroGeass
      TheZeroGeass
      • member
      • 1 kudos
      Already has 2.2 version and tried re-download again (include trying 2.1 version too, same result) but the trash still not disappear so I tried use another mod like Improved Boston Airport 2.0 and it's work perfectly well (Don't have any trash, very clean). After your last comment I thought maybe cambridge police station redux gonna make trash at the Boston airport not disappear like 3 or 4 years ago of bos Boston airport mod at that time but no and your cambridge police station redux work perfectly well as the same too (yes, already try defend mission over there more than 1 time). Maybe I just need to look over some trash and enjoy your mod XD, only this mod that change or impact Boston airport (I hope improved brotherhood of steel from Warsaw2135 not cause this trouble).
    5. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Dont know what to tell you, it works fine for me. That mod breaks precombines, you will lose lot of FPS at airport. I use also improved brotherhood of steel, no issues. Try Discord maybe someone can help you.
    6. TheZeroGeass
      TheZeroGeass
      • member
      • 1 kudos
      ok, thank you for the help.
    7. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      That is very strange, are you perhaps on Next Gen version? DM me your load order list I will take a second look.

      I checked my setup running PRP 74.12 with my PRP patch and all works fine. Tested using this clean save.
      Last time there was Airport issue, it was Fort Strong mod that was causing it from other mod author.
    8. TheZeroGeass
      TheZeroGeass
      • member
      • 1 kudos
      Already have someone fully test for me and I think it's bug on my current save, also try with pure save without mod when I bought this game on 2017 (it's clean). I tried different save that used same mod and load order as my current and it still pretty clean XD and now I already finished the point when I gonna kill Kellogg (the same save but before BOS arrive) meet up with Danse - fly to Prydwen and it's clean now (GOD DAMNED O_O) but I need say when I play this save on the first time I got bug on show no mercy quest not started, that's all. I have 2 choices 1. continue suffer with some trash at Boston airport or 2. restart from that point but I lose all 23-26 hours and become sole builder again XD.
    9. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Sorry, to hear that. Yeah finish your playthrough, not worth to mess with save files at this point. Thanks for the info.
  10. kaliban93
    kaliban93
    • member
    • 2 kudos
    мод работает норм но машины не убрались в гараже и на крыше гаража 
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      There are no cars there, you see it in images. Adjust your load order move my mod at the end.
  11. Werexey
    Werexey
    • member
    • 0 kudos
    Hello. At the airport, after some time, the textures of buildings begin to disappear. At the Boston police station too. And exactly those textures that were in the clean version disappear.
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Hi, make a screenshot. Most likely load order issue.
    2. HerrmTheWorm
      HerrmTheWorm
      • member
      • 0 kudos
      I have the same issue as well, maybe the new update?
    3. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Mod works with v1.10.980, I tested that. No idea about Monday update don't have it yet. I use the old version 1.10.163.
      Still no screenshot.
  12. Mightywarri0rr
    Mightywarri0rr
    • premium
    • 0 kudos
    Is it compatible with Prydwen Redone?

    https://www.nexusmods.com/fallout4/mods/52333?tab=description

    Thanks!
    1. slavomirperun
      slavomirperun
      • premium
      • 47 kudos
      Yes, all Prydwen mods work fine.
    2. Mightywarri0rr
      Mightywarri0rr
      • premium
      • 0 kudos
      Thanks bud!