Ok I Fixed The Errors I Saw/Found In the Files, Added Physics, Did Best To Fix Any Clipping I saw With my Preset, Added AWKCR & Renamed The Outfits In the Esp. Also Created A ESL Version.
If ya want it let me know and if the Uploaded/Author Wants it same.... also added Physics to the Sniperwolf Attire
I know is an old mod, but i decided to give a try and see what was the issue...It seems that the wrong path was written for the Nif files (bodyslide says thery are in a file called "EVACBBE "but there is none named like that) and because of that they aren't used in the game and other related issues(trying to directly open it causes errors on outfit studio). To fix it, you have to go to outfit studio and make a new project (with a new reference) and load the outfit mesh and change the original reference(delete the old cbbe body and set as reference the new one you want to put). Fix the clipping issues and then save project, It will create a new bodyslide file with the correct path and finally build it on Bodyslide and you are good to go.
Test in it in-game and it is working fine for me after fixing the issue. Even the chemical station recipe works.
Bodyslide files not working. Tried installing manually and in MO2. When spawning this project in Outfit Studio, the sliders don't affect the body at all.
Please post the console commands for this, as I only found the "recipies" after pulling up the "help eva 4" command. The outfit doesn't show up in the chem station, hence me asking for this small favor with HUGE gratitude consequential to the correct result.
Can somebody make a bodyslide conversion that actually works for the Open Jumpsuit? I tried replacing the built-in CBBE mesh inside the JumperOpen.nif's file using Outfit Studio and I finally got it to have the shape I wanted. However, I get "Unweighted" errors while trying to save.
It was just a straightforward patch job I did. 1.)Load up the reference bodyshape I wanted. 2.)Loaded up the open jumpsuit's .nif file. Now I have two CBBE bodies on the Shapes list. 3.)Delete the CBBE body included with the open jumpsuit's file. This is the one that doesn't change shape. 4.)Rename my CBBE reference body to "CBBE" since that's what the open jumpsuit's original included body was named as. 5.)Used the tool to expand a few areas near the crotch and upper thighs of the "jumper" to hide the overlapping skin. 6.)Did the same to the overlapping skin on the "bra" shape. 7.)Under "Sliders" clicked "Conform All" as usual. 8.)Selected all outfit shapes "jumper", "bra", "boots", "watch", basically everything other than the CBBE shape. 9.)Right-clicked and selected "Copy Bone Weights". 10.)Tried to Save Project As, I got the Unweighted error. Saved anyway. 11.)Replaced the EvaJumperOpen.nif in my game's Data folder with the one I just made. 12.)Ran the game.
This is where the issues appear. In-game, the open jumper now shows a curvy body since I put one inside the mesh as per above (I use JosieBody presets). However, its crotch area has the private parts clipping through the jumper and some parts of the legs, knees on the pants-area of the jumper. This is especially terrible when I crouch, the knees get squished as if someone smashed them flat and the legs poke through that area.
Can somebody please do a much better job than I did and share it here?
42 comments
Added AWKCR & Renamed The Outfits In the Esp.
Also Created A ESL Version.
If ya want it let me know and if the Uploaded/Author Wants it same....
also added Physics to the Sniperwolf Attire
Test in it in-game and it is working fine for me after fixing the issue. Even the chemical station recipe works.
It was just a straightforward patch job I did.
1.)Load up the reference bodyshape I wanted.
2.)Loaded up the open jumpsuit's .nif file. Now I have two CBBE bodies on the Shapes list.
3.)Delete the CBBE body included with the open jumpsuit's file. This is the one that doesn't change shape.
4.)Rename my CBBE reference body to "CBBE" since that's what the open jumpsuit's original included body was named as.
5.)Used the tool to expand a few areas near the crotch and upper thighs of the "jumper" to hide the overlapping skin.
6.)Did the same to the overlapping skin on the "bra" shape.
7.)Under "Sliders" clicked "Conform All" as usual.
8.)Selected all outfit shapes "jumper", "bra", "boots", "watch", basically everything other than the CBBE shape.
9.)Right-clicked and selected "Copy Bone Weights".
10.)Tried to Save Project As, I got the Unweighted error. Saved anyway.
11.)Replaced the EvaJumperOpen.nif in my game's Data folder with the one I just made.
12.)Ran the game.
This is where the issues appear. In-game, the open jumper now shows a curvy body since I put one inside the mesh as per above (I use JosieBody presets). However, its crotch area has the private parts clipping through the jumper and some parts of the legs, knees on the pants-area of the jumper. This is especially terrible when I crouch, the knees get squished as if someone smashed them flat and the legs poke through that area.
Can somebody please do a much better job than I did and share it here?
Will upload an image later!
Edit: ALso there is an issue with the bodyslide files, however it's nothing a few minutes in outfit studio cannot fix (just did it myself)!
Image Uploaded!!!
-Vinovat