Outstanding Mod having installed and transferred Vault 88 which took me a couple of tries This and the other Far Harbor Settlements are a piece of cake. You've done a wonderful job of space utilization with large areas available for customization. Thanks for all.
No problem! Yeah, it's a breath of fresh air importing my other settlements - compared to my vault, they take no time at all. Sorry I didn't reply sooner - I don't get much traffic on my other BPs these days so I usually just check my vault page. Glad you liked this BP, it's one of my personal favorites!
couldnt exit out of the contamination arch due to the metal structure of the roof blocking the way. the only way out is to delete it but will leave space above. replace it with which roof or floor?
Those pieces are part of the barn roof set if you want to replace them with some pieces that don't have that support frame built in. However, I find it strange that you're having this problem, because those pieces never stopped my character from passing through the opening there. Maybe try to select>release them in workshop mode before deleting, that often fixes problems with imported pieces.
Thank you for your comments. I had the game freeze up on me twice when I attempted to import your design. However, I followed your advice and troubleshooting. It resolved itself and worked well.
Pinksluvva121 wrote: Looks awesome, but freezes my PC never to unfreeze when transferring gutted!
Sorry to her that you're having problems, especially with this build because it's my most under-rated settlement on Nexus. I wanted to be sure nothing was wrong on my end so I just tested it again. I went through the entire process of nuking the settlement, importing it, and reactivating the power. I completed the process successfully without any problems at all. So I'm confident that there's no problem with my blueprint.
I'm always mystified by the problems some people have with Transfer Settlements because I've never had a single issue, and I've used version 1.2, 1.3, and 1.41. I'm not dismissing the fact that you're having an issue, but I do think the problem very likely is on your end. First, I would suggest making sure that you have the Echo Lake Lumberyard under your control as a settlement where you can use the workshop and build. There is a quest associated with gaining control of this settlement if I recall correctly.
Turned out I had transfer settlements in wrong position in load order. Changed that and downloaded and installed the HUD Framework DEF_UI patch and everything worked perfectly. Thank you so much. I can strip a PC down to bare bones and put it back together no problem, but Im crap with programming and most programs. It's an awesome settlement and obvious youve put ALOT of work into it. Thank you for that and thank you for your help.
Nice, but cleaning up beforehand is proving difficult. Any suggestions on what to prioritize? Using the "WorkshopBudget" console command causes some walls to be exposed, which looks jarring.
Are you referring to clearing the initial scrap laying around in the settlement? I'm not sure what to say about prioritizing. It's all priority for me when I play. I don't lay the first brick until I've cleared all the scrap. It only takes like 5-10 minutes without console commands.
I guess I would say that you should focus on the main building next to the bleachers, and the area along either side of the boardwalk.
12 comments
Sorry to her that you're having problems, especially with this build because it's my most under-rated settlement on Nexus. I wanted to be sure nothing was wrong on my end so I just tested it again. I went through the entire process of nuking the settlement, importing it, and reactivating the power. I completed the process successfully without any problems at all. So I'm confident that there's no problem with my blueprint.
I'm always mystified by the problems some people have with Transfer Settlements because I've never had a single issue, and I've used version 1.2, 1.3, and 1.41. I'm not dismissing the fact that you're having an issue, but I do think the problem very likely is on your end. First, I would suggest making sure that you have the Echo Lake Lumberyard under your control as a settlement where you can use the workshop and build. There is a quest associated with gaining control of this settlement if I recall correctly.
You can also refer to the troubleshooting checklist I have on my Vault 88 page. Even though that's a different settlement, 95% of the stuff on the checklist would apply to any settlement, or to any issues with getting Transfer Settlements and blueprints to work. If you're certain you can rule out everything on the checklist and can verify that it still freezes your PC even with no mods beyond HUD Framework and Transfer Settlements, then your next recourse is to contact CDante, the Transfer Settlements mod author, and follow his process for bug reporting.
Good luck, let me know whether or not you get it working.
It's an awesome settlement and obvious youve put ALOT of work into it. Thank you for that and thank you for your help.
I guess I would say that you should focus on the main building next to the bleachers, and the area along either side of the boardwalk.