When I try to launch the mod I get, Run time error (at 33:71); could not call proc. Is there something else I should do before launching or downloading?
Someone else noticed that as well; Unfortunately, I can't replicate it and not sure what's wrong. You can follow those instructions though that lets you install the mod manually here.
Could you please try also this new installer I uploaded here: Control-DualSensitive-Mod_Setup.exe v2.2.2 to see if it makes any difference. It's literally shooting in the dark as I can't replicate the issue in order to find out what's wrong...
btw I tried manual installation, but not sure how to proceed as no adaptive feedback from triggers, my dualsense controller does not work unless I enable steamiput. is that why it's not working? I checked lower right tray, triggers enabled.
Ok it finally worked with manual installation and dsx with steaminout enabled. Not sure if that was the right combo of stuff needing to be enabled but i think its working im still in the tutorial section i will see if things continue to be smooth from here on.
I downloaded Control version 1.30 (new patch) and DSX 3.143 (beta), but the Dualsense features don't work. The emulation is installed as if I have an Xbox 360. Maybe you need to wait for the mod to be updated for the new version of the game?
Check the new version I just uploaded that no longer requires DSX and let me know. Unfortunately, I don't have the GOG version of the game to test it there. If you could send me back some logs, I might be able to see what's wrong
I've been trying to get the mod to work for two days. I've tried changing DSx versions, putting the .ini file in the mod folder, and uninstalling the mod several times, but nothing works. With this new version, when I try to run the .exe, i go this error message "Error Runtime error (at 33:71): Could not call proc." appears. I checked my antivirus, and it's not blocking the file.
I think I've only seen this error when I tried the installer on steam deck that didn't work and came with the same or similar message to "Error Runtime error (at 33:71): Could not call proc." Are you trying the mod on Windows? What OS version you are you running on?
i tried a lot of stuff, uninstall and install visual cc, update runtime, use sfc, unfortunately nothing worked, thx for reply. my os is windows 11 24h2 26100.4652
Unfortunately, I can't replicate the issue and it's hard to find out what's wrong. I added some manual instructions though that lets you install the mod manually here. Could you please follow those and verify whether they work fine for you. If they are ok, I'll update the Nexus Mods page adding this section and upload those binary files here as well for anyone that wants to install it manually.
Could you please try also this new installer I uploaded here: Control-DualSensitive-Mod_Setup.exe v2.2.2 to see if it makes any difference. It's literally shooting in the dark as I can't replicate the issue in order to find out what's wrong...
I created a new version of the mod that doesn't rely on DSX or any other third-party software anymore. The installer is here: Control-DualSensitive-Mod_Setup.exe
Full source code and instructions here: https://github.com/tpetsas/control-dualsense-mod/blob/main/README.md
I created a new version of the mod that doesn't rely on DSX or any other third-party software anymore. The installer is here: Control-DualSensitive-Mod_Setup.exe
Full source code and instructions here: https://github.com/tpetsas/control-dualsense-mod/blob/main/README.md
EDIT: Worked by manually adding the optional .ini file and changing param to DSX 3.1 and setting for 360 emulation
Doesn't work for me.
Control Ultimate (DX12) + DSX (3.0.5 or 3.1 beta) both latest from Steam. Steam input is disabled. Tried running the game from Steam and DSX, tried Native support and 360 emulation from DSX - no luck. Controller only works as standard 360 controller with 360 emulation, native doesn't register the controller at all.
Debug: DualsenseMod v1.0 by Thanos Petsas (SkyExplosionist) Game version: 2060881 Module base: 00007FF605280000 Sigscan start Sigscan elapsed: 41 ms. Offsets: 108, 37468, 1A38, 298 OnGameEvent_Internal at 00007FF605631F00 DSM_ModelHandle_GetPropertyHandle at 00007FFAC0A5F450 InputManager_pInstance at 00007FFB0B566880 DSM_InputManager_IsMenuOn at 00007FFB0B558DF0 InputManager_IsGameOn at 00007FFB0B558DD0 InputManager_SetGame_Internal at 00007FFB0B558DE0 InputManager_SetMenu_Internal at 00007FFB0B558E00 Addresses set ./plugins/dualsense-mod.ini is not an INI file; using config defaults... Config: [debug mode: false] [DSX legacy version: false] Applying hooks... Hooks applied successfully! DSX++ client initialized successfully! Ready.
Hey, does this work with the base game? or i have to buy the ultimate? for example, if i have the epic games version they gifted? because i ain't able to use dsx to conect it as a dualsense
Hello Thanos (ϵυχαριστούμϵ πρώτα πρώτα) Is there a way to fix this to work with Control Ultimate Edition? It seems like its updated a few days before and the plugin doesn't work (it shows a poppup that specifically says so). I am currently on Gamepass but I don't think it matters. Thanks!
I just updated the game on Steam and the mod works fine! I have only tested the mod on Steam and Epic Games as I don't own the gamepass version from Microsoft.
I think I have dsx installed correctly and have the ultimate edition on steam with all dlc. When I launch the game in dsx, it doesnt even recognize the controller input. All other plugins are working (Brighter characters, quick weapons switch, and no hud)
Are you sure? I just tested it and it works pretty fine. I started a new game and I noticed that the triggers register a bit after you enter the first tutorial when you get your first gun. Are you sure you followed all the required steps correctly?
48 comments
Thanks!
If this works, I'll upload the file in Nexus Mods!
Thanks
Thanks!
btw I tried manual installation, but not sure how to proceed as no adaptive feedback from triggers, my dualsense controller does not work unless I enable steamiput. is that why it's not working? I checked lower right tray, triggers enabled.
Thanks!
If this works, I'll upload the file in Nexus Mods!
Thanks
Thanks!
Only issue is, the effect is very strong. I takes a lot of force to pull the trigger (Dual Sense Edge Controller).
Is it possible to configure effect strength somehow?
Thanks a lot.
Full source code and instructions here: https://github.com/tpetsas/control-dualsense-mod/blob/main/README.md
Full source code and instructions here: https://github.com/tpetsas/control-dualsense-mod/blob/main/README.md
Doesn't work for me.
Control Ultimate (DX12) + DSX (3.0.5 or 3.1 beta) both latest from Steam. Steam input is disabled.
Tried running the game from Steam and DSX, tried Native support and 360 emulation from DSX - no luck. Controller only works as standard 360 controller with 360 emulation, native doesn't register the controller at all.
Debug:
DualsenseMod v1.0 by Thanos Petsas (SkyExplosionist)
Game version: 2060881
Module base: 00007FF605280000
Sigscan start
Sigscan elapsed: 41 ms.
Offsets: 108, 37468, 1A38, 298
OnGameEvent_Internal at 00007FF605631F00
DSM_ModelHandle_GetPropertyHandle at 00007FFAC0A5F450
InputManager_pInstance at 00007FFB0B566880
DSM_InputManager_IsMenuOn at 00007FFB0B558DF0
InputManager_IsGameOn at 00007FFB0B558DD0
InputManager_SetGame_Internal at 00007FFB0B558DE0
InputManager_SetMenu_Internal at 00007FFB0B558E00
Addresses set
./plugins/dualsense-mod.ini is not an INI file; using config defaults...
Config: [debug mode: false] [DSX legacy version: false]
Applying hooks...
Hooks applied successfully!
DSX++ client initialized successfully!
Ready.
Is there a way to fix this to work with Control Ultimate Edition? It seems like its updated a few days before and the plugin doesn't work (it shows a poppup that specifically says so). I am currently on Gamepass but I don't think it matters. Thanks!
I'll have a look this weekend. If the game is updated, it's very likely I need to adjust it!