A fix for the rear window issue 1.open the "parts.txt" file in the cars folder 2.find "car_vipergts-window_back=41" entry and change window_back to window_trunk 3.save file This fixed it for me.
It seems the body of the vehicle isn't fully centered. Thus, when you install wheels that push the limits of width, the Passenger/Right side will be just at the edge of the wheel wells, and the Drivers/Left side will go past the wheel wells.
To work around this, work on the Passenger/Right side first to get the width you want. Then for the Drivers/Left side, add +10 to the ET on the rims for that side. This will make it line up.
And for anyone interested, these are the wheel sizes I use to get the biggest rims possible, widest tread possible, and without going larger than- or out past the wheel wells. Go down 1 rim size and 5-10 width if you want to push the limits, but not to the absolute extreme.
Passenger/Right Front (265/20R22) ET:0 Drivers/Left Front (265/20R22) ET:10 Passenger/Right Back (355/20R23) ET:0 Drivers/Left Back (355/20R23) ET:10
The problem is probably in your installation. Make sure the mod is correctly extracted. Sometimes people can extract archive in the duplicate folder. If you open the directory of this mod you should see multiple files. If you see only another directory it means you have extracted it wrong. Use directory "Car Mechanic Simulator 2021_Data\StreamingAssets\Cars"... Also if you use more mods there is a chance the game is locked for certain number of non-workshop mods. I am not sure but early version of this game allowed me to use only five of my own mods at the same time. Other did not showed up.
Give Feedback
9 comments
Edit: it just spawned in the auction
1.open the "parts.txt" file in the cars folder
2.find "car_vipergts-window_back=41" entry and change window_back to window_trunk
3.save file
This fixed it for me.
It seems the body of the vehicle isn't fully centered. Thus, when you install wheels that push the limits of width, the Passenger/Right side will be just at the edge of the wheel wells, and the Drivers/Left side will go past the wheel wells.
To work around this, work on the Passenger/Right side first to get the width you want. Then for the Drivers/Left side, add +10 to the ET on the rims for that side. This will make it line up.
And for anyone interested, these are the wheel sizes I use to get the biggest rims possible, widest tread possible, and without going larger than- or out past the wheel wells. Go down 1 rim size and 5-10 width if you want to push the limits, but not to the absolute extreme.
Passenger/Right Front (265/20R22) ET:0
Drivers/Left Front (265/20R22) ET:10
Passenger/Right Back (355/20R23) ET:0
Drivers/Left Back (355/20R23) ET:10