Skyrim

118 comments

  1. Astra2000
    Astra2000
    • premium
    • 157 kudos
    Locked
    Sticky
    - Every posts, screenshots and videos using my ENB are very welcome!
    - Please endorse it if you like it!

    GENERAL NOTES:
    Spoiler:  
    Show
    RELEASE NOTES:
    Spoiler:  
    Show
    Every in future coming new features of ENBSeries will be ignored (disabledl), if they will cost
    too much performance. This is not the planned goal for this ENB-Preset,
    which was mainly designed for playing the game with a better look. It
    can be, that a new version of ENBSeries are very often updated by Boris
    Vorontsov. But I will try to do my best I can for this reason to keep
    all up-to-date!!!
    Please and do not forget, that the great fix "The Moon Model Fix For Hircine Quest by HHaleyy" need to be checked in her
    Kwanon ENB archive, whether it was updated, too!!! ... But just install
    "Meshes" and "Textures" in the "Data" folder without the now included
    "atmosphere.nif" only!
    For some reasons it is possible, that my preset needs often some updates, which maybe shows, that all is a WIP!?!
    ... Sadly then, it is not a way to realize it direct to a final
    version, if the ENB-Tech was often need to be updated by Boris Vorontsov
    to prevent or fix issues!!! ... Am sorry for this and be
    patient!!!

    IMPORTANT:
    Spoiler:  
    Show
    The part "... or newer later available version" were erased at the added download informations,
    because it is often not possible!!! The reason for it is: Dependent of
    the ENBSeries updates content it needs better a fully new optimized
    version to work proper!!!

    Some special notes to SMAA modules:
    Spoiler:  
    Show
    I have longer tested the SMAA modules now and can only recommand you for usual gaming to not
    use them. It cost too much performance. Also if you have a hell-machine
    like I have new now, you will not have fun with it. Am sorry, but now I
    will not included them anymore. This ENB-Preset should not useable just
    for screenarchery!!! It is not the my way I want to go!!!

    Needed for previous versions:
    Spoiler:  
    Show
    Just a tip: If you have problems with shadows, then try the following:
    Spoiler:  
    Show
    enbseries.ini:
    [EFFECT]
    EnableAutomaticAmbientCalculation=false ----> true
    ... But it can be possible, that you need to set the ENB brighter at DAY -
    NIGHT - INTERIOR after enabled this feature!?!

    During further progress in SkyVision ENB Custom (0.453.7) for Vanilla switched back now:
    Spoiler:  
    Show
    enbseries.ini:
    [AUTOAMBIENT]
    IgnoreWeatherSystem=true ---> false

    Again during further progress in SkyVision ENB Custom (0.453.7) for Vanilla changed now:
    Spoiler:  
    Show
    enbseries (folder) / enbeffect.fx.ini:
    Intensity Contrast Day=1.15
    Intensity Contrast Night=1.0
    Intensity Contrast Interior=0.8
    +
    Adaptation Min Interior=0.04

    Small update for SkyVision ENB Custom (0.453.7) + ( 0.453.8 ) for Vanilla recommanded:
    Spoiler:  
    Show
    enbseries.ini:
    [LIMITER]FPSLimit=60.0 ---> 58.0


    Explaination of the versions numbers:
    Spoiler:  
    Show
    Queenieangel use as example 0.459.1 based on the update number and I prefer 0.459.2 the versions number!!!  ;=)

    UPDATE(S) NOTES:
    Note: Some older Update(s) Notes are to download under Miscellaneous files now!!!
    Spoiler:  
    Show
    27.10.2021
    - SkyVision ENB Custom (0.464) for Vanilla AIO
    Note(s): Configurated for latest ENBSeries v0.464 (Release 2)!!! ... For more infos read the changelog!!!
    30.10.2021
    - A new version of fix "The Moon Model Fix For Hircine Quest by HHaleyy" added in Kwanon ENB (meshes + textures folder only) available again
    now!!!  After erase the except atmosphere.nif at last!!!
    07.11.2021
    - A new version of fix "The Moon Model Fix For Hircine Quest by HHaleyy" added in Kwanon ENB (meshes + textures folder only)
    available again now!!!  After erase the except atmosphere.nif at last!!!
    28.11.2021
    - A new version of fix "The Moon Model Fix For Hircine Quest by HHaleyy" added in Kwanon ENB (meshes + textures folder only)
    available again
    - SkyVision ENB Custom (0.464.2) for Vanilla
    Note(s): Configurated for latest ENBSeries v0.464 (Release 2)!!! ... For more infos read the changelog!!!
    - SkyVision ENB Custom (0.464.3) for Vanilla
    Note(s): Configurated for latest ENBSeries v0.464 (Release 2)!!! ... For more infos read the changelog incl. from previous version 0.464.2!!!
    29.11.2021
    - ENBSeries 0.464 with update 2 released
    Changes by Boris described: Fixed rain wet surfaces wrongly activated at snow.
    Note(s): Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!
    - SkyVision ENB Custom (0.464.4) for Vanilla
    Note(s): Configurated for latest ENBSeries v0.464 (Release 3)!!! ... For more infos read the changelog!!!
    02.12.2021
    - SkyVision ENB Custom (0.464.5) for Vanilla
    Note(s): Configurated for latest ENBSeries v0.464 (Release 3)!!! ... For more infos read the changelog!!!
    03.12.2021
    - SkyVision ENB Custom (0.464.6) for Vanilla
    Note(s): Configurated for latest ENBSeries v0.464 (Release 3)!!! ... For more infos read the changelog!!!
    08.12.2021
    - ENBSeries 0.467 released
    Changes by Boris described: Added requested IgnoreWeatherSystemInterior parameters to simplify tweaking.
    Note(s):  Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!

    - SkyVision ENB Custom (0.467) for Vanilla
    Note(s): Please read infos in changelog!!!
    - ENBSeries 0.467incl. Update 1 released.
    Changes by Boris described: Added LightingInfluence to the [SNOW] category.
    Note(s):  Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!

    09.01.2022
    - A new version of fix "The Moon Model Fix For Hircine Quest by HHaleyy" added in Kwanon ENB (meshes + textures folder only)
    available again now!!!  After erase the except atmosphere.nif at last!!!

    15.01.2022
    - A new version of fix "The Moon Model Fix For Hircine Quest by HHaleyy" added in Kwanon ENB (meshes + textures folder only)
    available again now!!!  After erase the except atmosphere.nif at last!!!

    26.01.2022
    SkyVision ENB Custom (0.467.3) for Vanilla
    Note(s): Please read infos in changelog!!!
    02.02.2022
    - ENBSeries 0.470 released.
    Changes by Boris described: Added wireframe visualization to profiler category of editor. Allow negative values for DirectLightingDesaturation and
    PointLightingDesaturation parameters.

    Note(s): Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!

    03.02.2022
    SkyVision ENB Custom (0.470) for Vanilla
    Note(s): Please read changelog!!!
    17.02.2022
    - ENBSeries 0.472 released.
    Note(s): Please read changelog!!!
    18.02.2022
    - ENBSeries 0.472 Update 1 released.
    Note(s): Please read changelog!!!
    19.02.2022
    - ENBSeries 0.472 Update 2 released.
    Note(s): Please read changelog!!!
    24.02.2022
    - SkyVision ENB Custom (0.472.2) for Vanilla
    Note(s): Please read changelog!!!
    26.02.2022
    - ENBSeries 0.472 Update 3 released.
    Changes by Boris described: Added ApplyToAllGrass parameter for complex grass to toggle if lighting applied to usual grass without normal map. Minor fixes for wrongly detected grass textures.
    Note(s):  Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!

    09.04.2022 (Release 03.04.2022)
    Changes by Boris described: Fixed not loading of wrong sized textures in enboost memory manager.
    Note(s):  Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!
    17.04.2022 (Release 15.04.2022)
    Changes by Boris described: Added ApplyToSSS parameter to [SSAO_SSIL] category. Renamed ApplyToAllGrass parameter to ApplyToBasicGrass. Added BasicGrassFakeLight and FakeLight parameters for complex grass to satisfy requests by users. Fixed complex grass direct lighting which
    game wrongly set different to other objects per weather. Moved vertex colors of grass outside of ColorPow computation, so landscape defined
    vertex colors now have less darkness. Little bit improved cpu performance costs of complex grass.
    Note(s):  Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!!

    05.05.2022
    - ENBSeries 0.474 released.
    Note(s): Description by Boris: Added grass collisions effect. There are some bugs, so it's still work in progress

    07.05.2022
    SkyVision ENB Custom (0.474) for Vanilla
    Note(s): Please read changelog!!!
    14.05.2022 (Release 09.05.2022)
    ENBSeries 0.474 Update 1 released.
    Note(s): Automatic update by replacing with the new d3d9.dll and next game start till the in-game-menu!!! Description by Boris: Fixed collisions for underwater grass. Moved parameters of collisions to enbseries.ini with default values choosed by the most users. Fixed crash when UsePatchSpeedhackWithoutGraphics=true set.

    INFOS IN PAST:
    Spoiler:  
    Show
    15.11.2021
    Changed the recommandations of mods in description with new added Smoother Skies by Macxhiin now!!!


    Experimental phases of configuarations 11+12/2021:
    Spoiler:  
    Show
    28.11.2021
    SkyVision ENB Custom (0.464.2) for Vanilla (WIP)
    SkyVision ENB Custom (0.464.3) for Vanilla ---> Now fast updated wth - I think - better settings!!! (WIP)

    30.11.2021
    SkyVision ENB Custom (0.464.4) for Vanilla (WIP)
    ---> Again updated with - I think - better settings and also optimized for latest ENBSeries!!!


    02.12.2021
    SkyVision ENB Custom (0.464.5) for Vanilla (WIP)
    ---> Rolled back to previous settings!!!
    ---> Gamma-Tweak for improvement of a more saturated and powerful graphic!!!
    Note: Full details available in changelog!!!
    Optional: If the Interiors are too dark for you:
    Spoiler:  
    Show
    Skyrim -> folder enbseries -> enbeffect.fx.ini open with notepad(++)
    -> Adaptation Min Interior=0.04 -> 0.03 -> save and exit!!! ...

    Note: Will be added in next coming version(s), but till now it is a WIP!!!

    03.12.2021
    Optional: If all is too color saturated for you:
    Spoiler:  
    Show
    Skyrim -> folder enbseries -> enbeffect.fx.ini open with notepad(++)
    -> Color Saturation Day=0.84 / Color Saturation Night=0.62 / Color
    Saturation Interior=0.66 -> save!!!
    +
    Skyrim -> enbseries.ini open with notepad(++) -> [SKINSPECULAR] -> change
    there all values with 0.12 (by Queenieangel) -> save and exit!!! ...
    Note: Will be added in next coming version(s), but till now it is a WIP!!!

    Some words to my past WIP:
    Spoiler:  
    Show
    Many new features were added with updates and sometimes fixes by Boris.
    Skyrim (in every version) based has many limitations caused most from
    its weak engine limited maximum 4 light and shadow source at any
    location in Skyrim (Vanilla).
    So it is often a stony way to get something work fully right (perfect) working direct! Please be patient
    with me. I will do all my best I can to be able to share good results
    with my SkyVision ENB!!!


    SkyVision ENB Custom (0.464.6) for Vanilla

    - All WIP content listed here before are added final in this version now!!!
    - Sent all the WIP versions 0.464.2 - 0.464.5 in the Archive to prevent maybe possible issues!!!

    05.12.2021
    NEW: Monitor HDR-Mode on Windows 10 (Optional)
    - A way to can reduce flickering landscape is optional available to download now under Miscellaneous files!!!
    Note: I'm not using the Monitor HDR-Mode on Windows 10 and the RGB-Tweak in the Nvidia Control Panel! ... It is just a possible solution!!!

    NEW: SkyVision ENB Custom (0.464.6) for Vanilla little change after release
    - Set in enbseries (folder) ---> enbeffect.fx.ini  ---> DAY ---> Brightness Day=0.4 ---> 0.6 now!

    08.12.2021
    ENBSeries 0.467 released.
    SkyVision ENB Custom (0.467) for Vanilla

    12.12.2021
    NEW: ENBSeries 0.467 incl. Update 1 released. Download again!

    15.01.2022
    The Moon Model Fix For Hircine Quest by HHaleyy


    23.01.2022
    WIP: Erased the tip for brighter daylight, because the parameters before worked better so I have gone back!


    26.01.2022
    SkyVision ENB Custom (0.467.3) for Vanilla
    05.05.2022
    ENBSeries 0.474 released.

    More about it under UPDATE(S) NOTES before!!!


    07.05.2022
    MY LATEST VERSION:
    SkyVision ENB Custom (0.474) for Vanilla
    Note(s): Please read changelog, UPDATE(S) NOTES and the
    following helpful tips too!!!

    14.05.2022 (Release 09.05.2022)
    ENBSeries 0.474 Update 1 released.
    More about under UPDATE(S) NOTES below!!!

    Some helpful tips for optimal settings for latest and all coming versions:
    Spoiler:  
    Show
    Global
    A must-have-recommandation Smoother Skies by Macxhiin to fix best the sky as first step!!!
    Note: It is also added in description!!!

    The Moon Model Fix For Hircine Quest available in Kwanon ENB by HHaleyy!!!
    Note: Optional, but very recommanded!!! ... It is also added in description!!!


    For the Candle Lightsprite Effect you will need a texture like this from Cinematic Light Sprite ( Candles and Lanterns ) mod available on Nexus or an alternative other good one!!!

    Graphics Driver Settings


    These settings are for Nvidia users. As I don't use a AMD card I cannot provide any settings for these. Sorry for that!

    Go to your Nvidia graphics card driver settings (right-click on desktop, choose Nvidia Control Panel) and under 3D settings choose the application-specific settings for Skyrim (tesv.exe). The following table tells you about the recommended settings.

    Anisotropic Filtering - Application-controlled
    Antialiasing - Mode - Application-controlled
    Triple buffering - On
    Vertical sync - Off ... if you use monitor resolution 2560 x 1440 or higher

    Game-INIs

    Optional, but recommanded HERE availabe.

    Note:
    Now it is very helpful to use the whole weather section from its skyrim.ini below to can work better with the "Sunglare disabler by MannyGT"!!! ... Be not worried about it, that this will fully delete the sunglare. If you carefully read the description you will understand, that it will catched (fixed) more instead the wild behavior of the sun in a better way!!! ... To show you the result, you can find examples here on the end under images tab!!!

    Monitor

    G-Sync, Adaptive-Sync, Freesync should be better disabled if you use monitor resolution 2560 x 1440 or higher. It is near the same like to use VSync enabled in the game, which also is not needed in this constellation.

    Thank you!!!



    PS: Queenieangels SkyVision ENB (0.464) for Vanilla (Released 03.12.2021)!!!
    NOTE(S):
    It works with ENBSeries 0.474 and later too!!!
    If you like it more fantasy styled then chose this, it is very awesome!!!
    Please read more about it in her Sticky Posts!!!
  2. Astra2000
    Astra2000
    • premium
    • 157 kudos
    Locked
    Sticky
    GOOD NEWS:
    And now Queenieangel is an official team mate!!! Am so very happy about it!!! Heartly welcome in my little project!!!

    LATEST 2  VERSION(S):
    Queenieangels SkyVision ENB (0.464) for Vanilla
    =========================================
    Description:
    Spoiler:  
    Show
    One setting in the enblocal.ini is just for AMD graphic card users. Very important is, if you got a NVIDIA graphics card , then set the parameter under the section [MEMORY] "DisableDriverMemoryManager=true" to false. And this Version is for people, who using no weather mods, too. Queenieangel add only "Surreal Lighting" and "Always Clear Weather" to complete so brilliant her ambient of the game. Now she has also optimized her latest own version without new features!!!

  3. Queenieangel
    Queenieangel
    • premium
    • 461 kudos
    Locked
    Sticky
    I am happy to be a team mate of Astra! And I am a big Fan of Rudys ENBs
    But I also like to experiment and test with them!
    This is my version of this ENB and I tweaked it for my personal taste. . My version is more colorful as you can see on the image galerie.

    The mods that I use for more fantasy style and clear weather are :

    I used RLO and it works fine for me!
    Realistic Lighting Overhaul
    I used ELFX and it also works fine!!
    Enhanced Lights and FX

    And here are two versions of the SubSurfaceScattering in the enbseries.ini I also tweaked it for my liking.
    Spoiler:  
    Show
    With this settings the skin looks a bit brighter..This setting is used in my ENB version..
    Spoiler:  
    Show

    [SUBSURFACESCATTERING]
    Radius=7.04
    Amount=0.54
    EpidermalAmount=7.6
    SubdermalAmount=1.46
    EpidermalDiffuseSaturation=-0.12
    SubdermalDiffuseSaturation=0.42
    EpidermalMix=0.7
    SubdermalMix=0.38
    SubdermalTranslucency=0.68
    SubdermalPhase=0.32
    EnableTextureAlpha=true
    EnableSeparateInteriorParameters=true
    RadiusInterior=7.04
    AmountInterior=0.54
    EpidermalAmountInterior=7.6
    SubdermalAmountInterior=1.46
    EpidermalDiffuseSaturationInterior=-0.12
    SubdermalDiffuseSaturationInterior=0.42
    EpidermalMixInterior=0.7
    SubdermalMixInterior=0.38
    SubdermalTranslucencyInterior=0.68
    SubdermalPhaseInterior=0.32
    SurfaceBrightness=1.78
    SurfaceBrightnessInterior=1.78

    And with this setting the skin looks a bit darker.
    Spoiler:  
    Show

    [SUBSURFACESCATTERING]
    Quality=0
    Radius=6.92
    Amount=0.38
    EpidermalAmount=7.22
    SubdermalAmount=1.42
    EpidermalDiffuseSaturation=0.06
    SubdermalDiffuseSaturation=0.48
    EpidermalMix=0.72
    SubdermalMix=0.32
    SubdermalTranslucency=0.72
    SubdermalPhase=0.4
    EnableTextureAlpha=true
    EnableSeparateInteriorParameters=true
    RadiusInterior=6.92
    AmountInterior=0.38
    EpidermalAmountInterior=7.22
    SubdermalAmountInterior=1.42
    EpidermalDiffuseSaturationInterior=0.06
    SubdermalDiffuseSaturationInterior=0.48
    EpidermalMixInterior=0.72
    SubdermalMixInterior=0.32
    SubdermalTranslucencyInterior=0.72
    SubdermalPhaseInterior=0.4
    SurfaceBrightness=0.54
    SurfaceBrightnessInterior=0.54

    I also increased the SpecularPowerMultiplier under [ENVIRONMENT] and [OBJECT] section. I found out that it helps to reduce the neck seam.

    So, I hope you like my version. Some may like it and some my not. It's all a matter of taste!

    Queenieangel
    -One thing..I have the setting fGamma in the SkyrimPrefs.ini under [Display] at 1.3000.
  4. Queenieangel
    Queenieangel
    • premium
    • 461 kudos
    Locked
    Sticky
    Update Version 0.464
    Spoiler:  
    Show
    Changed settings under Particle in the enbseries.ini, so that the Water isn't to bright at night and day!
    My current
    SubSurfaceScattering Setting:
    Spoiler:  
    Show
    Quality=0
    Radius=7.04
    Amount=0.37
    EpidermalAmount=5.98
    SubdermalAmount=1.86
    EpidermalDiffuseSaturation=0.06
    SubdermalDiffuseSaturation=0.56
    EpidermalMix=0.8
    SubdermalMix=0.37
    SubdermalTranslucency=0.66
    SubdermalPhase=0.43
    EnableTextureAlpha=true
    EnableSeparateInteriorParameters=true
    RadiusInterior=7.06
    AmountInterior=0.36
    EpidermalAmountInterior=5.99
    SubdermalAmountInterior=1.84
    EpidermalDiffuseSaturationInterior=0.07
    SubdermalDiffuseSaturationInterior=0.57
    EpidermalMixInterior=0.81
    SubdermalMixInterior=0.38
    SubdermalTranslucencyInterior=0.67
    SubdermalPhaseInterior=0.42
    SurfaceBrightness=0.46
    SurfaceBrightnessInterior=0.45

    Version 0.459.1 under old Files!
    Version 0.453.13 under old Files!
    Version .0453.12 under old Files!
    Version 0.453.11 under old files!

    Spoiler:  
    Show
    Changed again brightness and also colors for a bit more vibrant look. See latest Images. I also have changed enblocal.ini:
    ReservedMemorySizeMb=96
    VideoMemorySizeMb=10240 for more performance!

    Version 0.453.9 under old Files!
    Spoiler:  
    Show
    Changed some color - and brightness settings in enbseries.ini and changed ReservedMemorySizeMb=128
    VideoMemorySizeMb=15970!  // You should change this for your Graphics Card
    My newest Images made with ELE

    Version 0.453.7 under old Files!
    Spoiler:  
    Show
    I have changed the lighting to be a bit brighter in Interiors and Exterior. The newest Images are made with
    TESLight-SkyrimLE
  5. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    Can the ENB work with ELFX?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Yes, you can try it, but you must know, that it is optimized for ELE instead. ... This way was for me also good looked plus even really better performance and with less bugged as with ELFX with needed fixes! 
    2. PrimevalYautja
      PrimevalYautja
      • member
      • 13 kudos
      and where can i get ELE?
    3. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Nexus!
    4. PrimevalYautja
      PrimevalYautja
      • member
      • 13 kudos
      what about the full version of ELE?
    5. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Please use ELE as it is described, thank you. 
  6. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    Is this ENB realistic as Rudy ENB?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Yes, please have a look at the screenshots. 
  7. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    Does this enb work with Relighting Skyrim + ELE?
    1. Queenieangel
      Queenieangel
      • premium
      • 461 kudos
      You can use any lighting mod you like, but maybe this enb preset look a bit different. It's up to you and your taste. I currently use it with  Lightened Skyrim LE
  8. XelusPrime
    XelusPrime
    • member
    • 1 kudos
    enbdev.com is down (as of writing this post), and I really wanted to try this preset out, this is why I'm against Boris' mindset of not allowing the binaries to be packaged with user-made presets, if his site is down, then no one can use newly downloaded presets.

    Any chance you have the binary for this ENB?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Sent you a PM. 
    2. Blueyes640
      Blueyes640
      • member
      • 5 kudos
      NO the site is not down ( Nov.19.22)  I just d/l the latest enb v0.479. Go to the end of the page and click on the arrow in the small box. Dot not use the other dowload options shown, they will lead you to all kind of crap ads links ect...
    3. Astra2000
      Astra2000
      • premium
      • 157 kudos
      @ Blueyes640:
      Thanks for comment / info!!!
  9. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    So, How can I Tweak the preset to make it look like from Zack Snyder's Justice League?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      The way of the mod and be able to support it is to use it as it is.
  10. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    So are there any MORE Recommendations to go with the ENB Preset?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Additional use what you like-
  11. lodgunther
    lodgunther
    • member
    • 0 kudos
    Nice ENB!
    What mods are you using for the screenshots? Examples ...

    • number 22 to 25; food, plating and basket textures
    • number 30, number 60; dock textures and interior wall texture
    • number 44; statues in Holds/cities
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Thank you!!! 

      These shots are from my friend and team mate Queenieangel. For more details ask her maybe via PM - am sorry. What I can say about her stuff is, that she uses many self ported SSE stuff she has not released here.

      For the baskets you can try them by HulkHogan in remastered version like I do!?!

  12. Petrovich
    Petrovich
    • member
    • 427 kudos
    Great mod. Why is there so little support?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Thx so much my friend!!! ... To support: I don't know, but I try to give my best I can! 
  13. PrimevalYautja
    PrimevalYautja
    • member
    • 13 kudos
    Aw Man
    Which Interior Lighting mod would i use to go with this ENB?
    RLO, ELFX or Relighting Skyrim + ELE?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Like I have written in description ELE (1st  main file) only! ... Alternative you could try ELFX, but needed maybe some tweaks in ENB-GUI!?! 
    2. PrimevalYautja
      PrimevalYautja
      • member
      • 13 kudos
      Just ELE? not Relighting Skyrim with it?
    3. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Yes, just ELE (1st  main file) only!!! ... ELE should be used standalone without RS!!! ... With RS it is not running well at some light and shadow sources I have noticed during tests at WIP time!!! ...

      All is also confirmed in this guide HERE under the ENB-Preset-List with same recommandations!!!
  14. betresse
    betresse
    • supporter
    • 1 kudos
    I can't find binaries 459.3 only 459 am I reading this wrong?
    1. Astra2000
      Astra2000
      • premium
      • 157 kudos
      Latest Version of ENBSeries is 0.459 (Release 2 with 1st update). The reason I've called it version 0.459.3 is, because it is the 3rd version of the at  the moment latest SkyVision ENB-Preset I've created!
    2. betresse
      betresse
      • supporter
      • 1 kudos
      Thank you for the reply much appreciated and the first one I have ever received lol. Again, thanks.
    3. betresse
      betresse
      • supporter
      • 1 kudos
      Thank you for the reply much appreciated and the first one I have ever received lol. Again, thanks.