Fallout 4

File information

Last updated

Original upload

Created by

Me

Uploaded by

WhoCaresomg74

Virus scan

Safe to use

50 comments

  1. cubbyman1
    cubbyman1
    • member
    • 22 kudos
    i'm going to test the 550 setting, it was at 700 somehting, anyway i will come back to report it, btw, what would happen if i wanted to go even lower, is there a threshold where it might screw with something if i go to low?
    EDIT: it seems to be running a bit better, but still getting stutter and i'm going to adjust it some more and see how it preforms at maybe 350.
    1. Dronzilla
      Dronzilla
      • member
      • 1 kudos
      Please report back if you find the perfect setting, we truly need it!
    2. cubbyman1
      cubbyman1
      • member
      • 22 kudos
      ok, so this setting didn't really seem to help much, however i found another tweak that did help.
      changing both your ini prefs and the general ini setting of this, bUseCombinedObjects=0
      it was a 1 but is now set to 0 and this helped significantly, however i'm still not sure if your tweak helped or not, i still have it set to 350 even though i'm not sure it even works, it could be helping along side this other tweak for all i know.
    3. Dronzilla
      Dronzilla
      • member
      • 1 kudos
      I did like you said but I also did used fallrim tools to clear active script and turning off godrays. It fixed my micro stutter!
    4. cubbyman1
      cubbyman1
      • member
      • 22 kudos
      hmn, i didn't even think god rays would help, but it's good we both learned something from this.
      anyway i got this tweak from this page.
      https://www.nexusmods.com/fallout4/mods/36352?tab=description
    5. cubbyman1
      cubbyman1
      • member
      • 22 kudos
      here is another tweak i just found, aparently it helped in the stuttering issues in starfield and people asked him to port it to this game, and people say it's really good, i have not yet tried it, but i'm going to later today.
      https://www.nexusmods.com/fallout4/mods/74841?tab=posts
    6. dooderek
      dooderek
      • supporter
      • 20 kudos
      ok, so this setting didn't really seem to help much, however i found another tweak that did help.
      changing both your ini prefs and the general ini setting of this, bUseCombinedObjects=0
      it was a 1 but is now set to 0 and this helped significantly

      People from the future, do NOT set bUseCombinedObjects=0 unless you love drawcalls and low FPS. This turns off precombines and would significantly reduce preformance. cubbyman1 smoking that good stuff.
    7. cubbyman1
      cubbyman1
      • member
      • 22 kudos
      @dooderek
      i don't claim to be an expert in these things, but all i can say is what worked for me, and PS. my fps were running way better when i made this one little tweak, it went from doing only 40fps in the major problem area to doing 70fps after this tweak, so call this information what you may, the results don't lie.

      i will admit that i was also using the fps fix mod that unlocks fps speeds significantly.
  2. LoneSola
    LoneSola
    • member
    • 0 kudos
    Mine keeps changing back to 3000 - I am changing it in MO2. What can I do?
  3. megatonresident
    megatonresident
    • member
    • 0 kudos
    i just did it i hope this works.

    i set it to 500. 
  4. JimmyRJump
    JimmyRJump
    • premium
    • 242 kudos
    It's iMaxDesired, not imaxdesir. Can be found under Particles around line 118ish when using Notepad++
    1. U1849KA
      U1849KA
      • member
      • 19 kudos
      Technically, he wasn't giving the actual command, just something to search for that would bring you to the command.
    2. JimmyRJump
      JimmyRJump
      • premium
      • 242 kudos
      Que?

      Modder says to look for a line in the prefs.ini and then miswrites the line we need to look for. It's like saying go get a fruit from peartr instead of the pear-tree.

      Wasn't and am not trying to get at WhoCaresomg, just pointing out an error...
    3. User_19523939
      User_19523939
      • account closed
      • 89 kudos
      Good point Jim. If you don't know, you'd be left unsure. IMO, when messing with ini's, its always best best to be accurate.

      Edit:
      Centerman states 6000 - but that's way above the original (750) and the author says to decrease the number. What numbers do you use Jimmy?
    4. adamito
      adamito
      • supporter
      • 0 kudos
      have you given it a try, jimmy? if this works, it'll be the first time any of the fps mods/tweaks I've seen on here will have been a success. low frame rates in the city are the one thing I've never been able to fix with this game...
    5. JimmyRJump
      JimmyRJump
      • premium
      • 242 kudos
      Just checked and it's set to a thousand? I'll set it a bit higher and see what gives...
    6. voodoohammer
      voodoohammer
      • supporter
      • 68 kudos
      Set mine to 650 and tested it in a couple of "heavier" areas. I did notice a slight improvement.
      I may even try it at 550, as the author suggests.
    7. XannahDeux
      XannahDeux
      • member
      • 27 kudos
      Yeah, why would I screw with my files if the person can't even spell the file right?.. Dubious. Thx Jimmy
    8. dodspringer
      dodspringer
      • supporter
      • 7 kudos
      It's the only line that starts with those letters, and it's missing a grand total of TWO (2) letters at the end.

      I think people can figure it out, you're just looking for something to whine about.
    9. JimmyRJump
      JimmyRJump
      • premium
      • 242 kudos
      @dod
      It's not about who can figure it out or not, it's about instructions that need to be correct -literally- to the letter. And since when is correcting a mistake whining? If it is in your book, then, hey!, don't whine about it...

      And since it's "just" two letters, you delete those letters and see what happens
    10. Brijekz
      Brijekz
      • member
      • 0 kudos
      What? He tells you to ctrl + f "imaxdesir", which brings you instantly to iMaxDesired. This really isn't a big deal, you couldn't possibly mess up if you followed exactly what he said.
    11. saint909
      saint909
      • supporter
      • 2 kudos
      MA tells you to "search" for iMaxDesir.

      If you can't do a simple 2+2 then perhaps you really shouldn't try to alter the .ini.
    12. InFamoo
      InFamoo
      • premium
      • 0 kudos
      If you delete those "Two letter" its still comes up with the same line....If you can't understand he just wants you to edit that line and change the number value you shouldn't be editing ini's at all
    13. deleted42202115
      deleted42202115
      • account closed
      • 67 kudos
      I searched imaxdes and lowered the number
      It worked 100%

      If I search again for iMaxDesired will it be even better?
      Can someone please post the new directions that work better?
      This is beyond confusing.

      Edit: OK I burned my computer, got a new one, did a fresh install, and searched iMaxDesired this time. I got the same FPS but everything smells better. Thanks for the warning about these mod directions.
  5. deleted44140507
    deleted44140507
    • account closed
    • 3 kudos
    Last time I tried this I shot a nuke from a fatman and got a instant ctd.
  6. TarriKhajiit
    TarriKhajiit
    • member
    • 3 kudos
    I hope this fixes my stuttering issue. My iMaxDesired was set to 3000. So I lowered it to 650.
    1. SammuF00L
      SammuF00L
      • member
      • 0 kudos
      did it work
  7. LitLad
    LitLad
    • member
    • 0 kudos
    A problem occurred during install. Nexus won't tell me what happened
    1. RussDodson
      RussDodson
      • premium
      • 0 kudos
      This is a text file not meant to be installed.

      You download the file 'Fallout4 Performance increase-22349-.zip' and unzip it to get 'Fallout4.txt.'

      Open that with your favorite text editor (Notepad, Notepad2 or Notepad++) and follow the instructions for editing the 'Fallout4Prefs.ini file.

      You don't actually need to DL it though - here are the complete instructions...

      Go to My Documents, My Games, Fallout4, then find Fallout4prefs.ini and open it in a text editor.

      Find the following:
      [Particles]
      iMaxDesired=750

      Change that number to 650, or 550 for even more performance.
      =====================================


      Thanks for the upload WhoCaresomg74...
  8. NikitaDarkstar
    NikitaDarkstar
    • premium
    • 6 kudos
    Didn't fix it completely, but a small stutter is far better than a several second freezeup, thanks.
  9. gadinel
    gadinel
    • premium
    • 6 kudos
    I gave it a try with iMaxDesired=600 and to my surprise it worked like a charm. No more lags, no more stuttering.
  10. grsspirit
    grsspirit
    • supporter
    • 4 kudos
    This works. Got a better FPS in the City!