Give Feedback
0 of 0
About this mod
These files are taken from the latest Windows 10 AMD 1036 drivers, and seem to offer a nice performance increase in Witcher 3 for AMD users. These drivers are built for DirectX 12 however they also increase GPU draw-calls in DirectX 11. These files were found on the Guru3D forums.
- Permissions and credits
Update#2: So AMD have just released the Crimson drivers, and I suggest using those drivers for now. They increase performance and reduce a lot of stuttering in Witcher 3 especially. However keep in mind if you use the Crimson drivers, you don't need to use these DLL files! Using these will not let you get all of the benefits from the Crimson driver, such as the Shader Cache (helps a lot with stuttering!).
Update: 1040 driver files have been released (added to download section). These are from a newer build than both previous versions and should give better performance. I noticed there was much less stutter compared to 1036 and small fps increase in some scenes. If you have tried the 1036 and 1040 versions and notice any improvements, please let me know in the comments section, it will be very helpful to both me and other users - thanks!
These files are taken from the latest Windows 10 AMD 1036 drivers (found at the Guru3D forums). They seem to offer significant performance increase even in DirectX 11 games, despite being built around DirectX 12. This means that games such as Witcher 3 can already benefit from these improvements! I have a single r9 290 and with these files I gain just over 5fps overall and even up to 10fps in some CPU-intensive areas.
The performance improvements will likely be seen more on lower-end CPUs as these drivers allow the GPU to use more draw-calls, thus allowing the GPU and CPU to communicate better with each other!
I recommend benchmarking the game in an intensive area (e.g Hierarch Square or Ford Forest) with and without these files. This way you can easily
see if you gain any performance improvements. It may not work for every AMD card, I have only tested it on a couple of systems however they did all have relatively new hardware.
Please let me know in the comments if it works for you! :) (Also noting what card you're using will be super helpful to others!)
Installation
Extract the 4 .DLL files to your Witcher3.exe location (e.g. D:\Games\Witcher 3 The Wild Hunt\The Witcher 3 Wild Hunt\bin\x64). In
order to work they must be in the same folder as "Witcher3.exe".
Uninstallation
Simply remove or delete the 4 .DLL files from the Witcher 3 directory.
It's Not Working!?
No FPS difference - I would only recommend to try this if you have a HD 7870 or higher (including all r9 series). You can try using it with a less powerful card, but the differences will likely be too small to notice.
Game doesn't start - If your game refuses to start or crashes at startup, you should try updating your graphics drivers first; especially if it's been more than 2 months since you've updated them. If it still doesn't start then try using the 1023 version in optional downloads (If these work, try 1023.5 for slightly better performance). If neither files work for you, then unfortunately your card may be incompatible with these drivers.
Credits
Resources and files were all found at Guru3D. Thanks to Guru PrMinisterGR for these files! All credit goes to him :)
Update: 1040 driver files have been released (added to download section). These are from a newer build than both previous versions and should give better performance. I noticed there was much less stutter compared to 1036 and small fps increase in some scenes. If you have tried the 1036 and 1040 versions and notice any improvements, please let me know in the comments section, it will be very helpful to both me and other users - thanks!
These files are taken from the latest Windows 10 AMD 1036 drivers (found at the Guru3D forums). They seem to offer significant performance increase even in DirectX 11 games, despite being built around DirectX 12. This means that games such as Witcher 3 can already benefit from these improvements! I have a single r9 290 and with these files I gain just over 5fps overall and even up to 10fps in some CPU-intensive areas.
The performance improvements will likely be seen more on lower-end CPUs as these drivers allow the GPU to use more draw-calls, thus allowing the GPU and CPU to communicate better with each other!
I recommend benchmarking the game in an intensive area (e.g Hierarch Square or Ford Forest) with and without these files. This way you can easily
see if you gain any performance improvements. It may not work for every AMD card, I have only tested it on a couple of systems however they did all have relatively new hardware.
Please let me know in the comments if it works for you! :) (Also noting what card you're using will be super helpful to others!)
Installation
Extract the 4 .DLL files to your Witcher3.exe location (e.g. D:\Games\Witcher 3 The Wild Hunt\The Witcher 3 Wild Hunt\bin\x64). In
order to work they must be in the same folder as "Witcher3.exe".
Uninstallation
Simply remove or delete the 4 .DLL files from the Witcher 3 directory.
It's Not Working!?
No FPS difference - I would only recommend to try this if you have a HD 7870 or higher (including all r9 series). You can try using it with a less powerful card, but the differences will likely be too small to notice.
Game doesn't start - If your game refuses to start or crashes at startup, you should try updating your graphics drivers first; especially if it's been more than 2 months since you've updated them. If it still doesn't start then try using the 1023 version in optional downloads (If these work, try 1023.5 for slightly better performance). If neither files work for you, then unfortunately your card may be incompatible with these drivers.
Credits
Resources and files were all found at Guru3D. Thanks to Guru PrMinisterGR for these files! All credit goes to him :)