File information

Last updated

Original upload

Created by

Dertien

Uploaded by

dertien

Virus scan

Safe to use

About this mod

My take on the Tachi from The Expanse series. It's a class C build for cosmetic reasons using the Slayton C class engines. This build, like most of my builds requires the ship building tolerance tweaks. Happy building.

Permissions and credits
Donations
Unless you've been living under a rock, this one needs no introduction.

I give you Tachi from The Expanse. Flying in 1st person IS possible. See screenshots for interior cockpit shots.



This time there is a build video instead of screenshots, because quite a few pieces overlap each other and it would otherwise not be clear how to build this ship with me just showing step by step what pieces to use. Have fun.

Installation

This is my savegame. You 'install' it by unzipping it into the saves folder of Starfield, which is located at:

Documents/mygames/starfield/saves.


  • Savegame
  • Complete Build video

Reference: https://sketchfab.com/3d-models/rocinante-1553cd046b21485e8a9c082030a0edd4
Requirements for building

You will require the 4 skillsets of piloting and shipbuilding and level 30 ingame to accomplish this build.

Attention: This build REQUIRES a mod which removes the clipping limits that exceed Bethesda's allowed
protocols in the ship building app. It is in no way a cheat, it just
allows certain parts to overlap others which are totally cosmetic and
does not affect gameplay.

Required mod can be found here

Installation steps:

  • Download
  • Unzip into your main game folder (where starfield.exe is located)
  • open the console and type (alt-tab and copy paste):

bat toleranceHuge
  • Press ENTER.

Pedigree:

  • Original Vessel NONE -  built from scratch

Specifications


  • Mobility: 100
  • Jump Range: 19 LY
  • Top Speed 130 MGLT
  • Mass 2420
  • Shield 1350
  • Hull 942
  • Crew: Max 6 (with a control station)

Offensive Systems

  • BAL 72
  • BAL  34
  • LAS 27

Internal Configuration

  • 1 x 2X1
  • 1 x 3X1
  • 2 x 1x1

UPDATE:
Thanks to nhimkoko who discovered that you could change the orientation and size of parts using the console, I changed the main thruster using his method to go from this

to this


All kudos for this hack go to the author of this rocinante who was kind enough to share his findings.

See Update video.