This step-by-step will recreate the ship on display at Taiyo Astroneering in Ryujin Tower on Neon.

We start our adventure at the Taiyo Astroneering showroom in Ryujin Tower on Neon.
In the shipbuilder, you want remove all existing ship pieces before we start.

• Add Taiyo Control Station 2x1 Bottom B to the builder to get us started. This adds crew stations.
• Attach Ship Bed 200 Landing Bay to the back end of the Control Station. You may need to Z key flip the part to face backwards.
• Attach Taiyo Companionway 1x1 Mid to the top back of the Control Station.
• Attach any Taiyo cockpit to the front of the Companionway.
• Attach any Class B reactor to the back of the Companionway. It MUST be a Class B reactor.
• Attach a Taiyo Companionway 1x1 Mid to the top of the Companionway we have already added. This is temporary to workaround an issue with a part not sold here.
• Attach The Extender Port 200 Docker - Top to the top of the temporary Companionway. This is the only docker they sell here so we need this workaround until we can get the correct one elsewhere.
• Attach Taiyo Cowling - Fore Top to the front of the temporary companionway. We will move this to its proper place later.
• Attach a gravdrive to the back of the temporary companionway. Any Class A or B gravdrive that has a back attachment node will work. You may need to tweak it later to have 30LY range.
• Attach Pinpoint 4G Landing Gear - Port and Starboard (Stbd) to the back sides of the Control Station and Companionway above it. This is a 2 tile high part.
• Attach (structural part) Taiyo Braking Engine - Port and Starboard (Stbd) to the front of the Pinpoint 4Gs. Make sure you target the front of the gear or you cannot select the structural part.
• Attach Nova 1000 Engines to the back of the Pinpoint 4Gs. They will also attach to the sides of the reactor and landing bay. These are Class B engines which is why a Class B reactor is required for this build.
• Attach 400G He3 Tank to the back of the gravdrive.
• We need to go to Akila City for this step. Once you get there, attach Hope 11 Docker - Fore to the front of the Control Station. Remove the temporary companionway in front of the gravdrive and the docker attached to the top of it. Move the cowling back to attach to the front of the gravdrive.
• (Optional but highly suggested for self defense) Attach Horizon Weapon Mounts to the sides of the gravdrive. You can add weapons and a shield here and finish the build. Any Class A or B weapons and shield will work. Attach the shield to the top of the gravdrive if you decide to stop here. See #17 for weapon instructions. There is a collision issue. Continue below for the recreation steps if you want the shield in the display.
• (Optional) We need to go to New Atlantis for the shield that is in the recreation. It appears to be an Osiris 2020-B Shield Generator. Attach this to the top of the gravdrive.
• (Optional but highly recommended for self defense) You can add any Class A or Class B weapon to your ship. The Display Ship is unarmed but does have weapon mounts so it is assumed that you supply your own. The top attachment nodes of the Weapon Mounts are usable but the bottom ones are not due to clipping with the engines. Add your weapons of choice to the top  nodes on the two Weapon Mounts. There is a single mount on each of the Pinpoint 4G Landing Gear. You can add two more weapons onto these.