Originalmod by mindfIux

Originalmod wird benötigt.


Diese Mod verwendet Partikel für den Flammeneffekt. Um sicherzustellen, dass die Flammen und der Rest der Effekte korrekt angezeigt werden, stellen Sie bitte sicher, dass der folgende Parameter in SkyrimPrefs.ini gesetzt ist:


Bitte beachtet die Installationsnotizen der Originalmod


Installation Notes

This mod uses particles for the flame effect so to make sure the flames and the rest of the effects
are displayed correctly, please ensure the following parameter is set in
SkyrimPrefs.ini:

[Particles]
iMaxDesired=1500

Complex Particle Lights offered by the recent versions of ENBSeries are fully supported by Embers XD.

I recommend enabling EnableBigRance (in enbseries.ini) as follows:

[COMPLEXPARTICLELIGHTS]
EnableBigRange=true

Frequently Asked Questions

How to make the flames more or less intense and adjust flame color?
Increasing the intensity related parameters in the [FIRE] category of enbseries.ini will make the flames more intense, while reducing them will have an opposite effect. The curve parameters work like gamma control. Increasing the curve tends to make
the flames more red and concentrated, while decreasing will make the
flames more yellow. Be aware that increasing the curve also easily
results in the flames blowing out especially with high amount of bloom.
Don't be afraid to go way above 1.0 if necessary. For reference, here's
how mine are set at the moment:

[FIRE]
IgnoreWeatherSystem=true
IntensityDawn=2.0
IntensitySunrise=2.0
IntensityDay=2.0
IntensitySunset=2.0
IntensityDusk=2.0
IntensityNight=2.0
IntensityInteriorDay=2.0
IntensityInteriorNight=2.0
CurveDawn=1.5
CurveSunrise=1.5
CurveDay=1.5
CurveSunset=1.5
CurveDusk=1.5
CurveNight=1.5
CurveInteriorDay=1.5
CurveInteriorNight=1.5

Embers look overly bright or dull. How to adjust the intensity of the glow?
Adjust the intensity and curve parameters in the [WINDOWLIGHT] category. Like with flames, increasing the intensity related parameters will make the embers brighter, while reducing them
will have an opposite effect. Increasing and decreasing the curve parameters will give the glow more or less a red tint. For reference, here's how mine are set at the moment:

[WINDOWLIGHT]
IgnoreWeatherSystem=true
IntensityDawn=4.0
IntensitySunrise=4.0
IntensityDay=4.0
IntensitySunset=4.0
IntensityDusk=4.0
IntensityNight=4.0
IntensityInteriorDay=2.0
IntensityInteriorNight=2.0
CurveDawn=1.0
CurveSunrise=1.0
CurveDay=1.0
CurveSunset=1.0
CurveDusk=1.0
CurveNight=1.0
CurveInteriorDay=1.0
CurveInteriorNight=1.0

How to increase or decrease the light cast by the fire sources?
Increase or decrease intensity parameters in the [COMPLEXPARTICLELIGHTS] category.

How do I reduce the glow from the braziers?
Decrease intensity parameters in the [LIGHTSPRITE] category.

How should I set [COMPLEXPARTICLELIGHT] parameters?
Here's how mine are set now:

[COMPLEXPARTICLELIGHTS]
IgnoreWeatherSystem=true
EnableBigRange=true
EnableShadow=true
ShadowQuality=0
IntensityDawn=1.0
IntensitySunrise=1.0
IntensityDay=1.0
IntensitySunset=1.0
IntensityDusk=1.0
IntensityNight=0.6
IntensityInteriorDay=2.0
IntensityInteriorNight=2.0
CurveDawn=1.0
CurveSunrise=1.0
CurveDay=1.0
CurveSunset=1.0
CurveDusk=1.0
CurveNight=1.0
CurveInteriorDay=1.0
CurveInteriorNight=1.0