Give Feedback
0 of 0
About this mod
This replaces either or both of your PEQ15 and M600V flashlight attachments with a realistic setup using a LA-5, Surefire M600V, connected to a Unity TAPS Pressure Switch. DISCLAIMER: Does not provide additional attachment functionality I.E. Flashlight will not have laser and vice versa.
- Requirements
- Permissions and credits
_____________________________________________________________________
The LA-5 + Surefire M600V + Unity TAPS Pressure Switch combo has finally arrived.
Welcome to the second entry in the Clone Correct Series. A series of mods for Ready or Not seeking to faithfully and accurately recreate gear and setups used
by real-world special mission units.
No Compromises.
The difference between this and every other gear mod is Clone Correct focuses on every single piece of gear to be accurate,
or “Clone Correct” to a real-life reference photo. Every single piece of gear down to the mag pouches are gear used and issued by the units
being portrayed.
This culminated in a mod that is striving for quality, authenticity, and getting it done right.
Welcome to Clone Correct.
The third release in this mod-series is another small release but widely anticipated one, meant to be a replacement for both the vanilla
M600V flashlight and PEQ15 to a LA-5 + Surefire M600V + Unity TAPS Pressure Switch.
What is the LA-5?
"The L-3Harris LA-5B/PEQ is the high power variant of the standard issue AN/PEQ-15 (ATPIAL) Advanced Target/Pointer Illuminator Aiming Laser. It is a compact, self-contained laser aiming system that features three functions: Visible Aiming Laser, Infrared Aiming Laser, Infrared Illuminator. The battle-proven LA-5B/PEQ is a weapon-mounted system that easily attaches to any M1913 Picatinny Rail with a standard rail grabber mount. The The co-aligned infrared and visible aiming lasers are easily adjustable; making for a simple zero procedure (zero one, and the other moves with it). Utilizing the same basic footprint as the AN/PEQ-15 the LA-5B/PEQ is one of the most versatile, lightweight, and compact aiming lasers available."
- L3HARRIS
The LA-5 is a more high-powered variant of the normal PEQ15 in-game. The LA-5's visible laser is much easier to see in sunlight and it's IR illuminator reaches further than its standard PEQ15 model.
What is the Surefire M600V?
"The M600V Scout Light® is the gold standard dual-cell in rifle-mounted WeaponLights. Powered by two 123A lithium batteries, it produces 350 lumens of white light and 120 mW of IR output, and you can select the appropriate spectrum for the situation at hand by simply rotating the bezel. SureFire’s proprietary TIR lens delivers a far-reaching, high-intensity beam with ample surround light. The rugged M600V easily and securely attaches to MIL-STD-1913 Picatinny rails via its integral thumbscrew clamp and is activated by clicking its push-button tailcap switch. Constructed of lightweight aerospace aluminum with a Mil-Spec hard-anodized finish, and O-ring sealed to keep out the elements, the tough M600V will endure combat-like conditions without any sacrifice in weapon maneuverability."
- SUREFIRE
A very common and rugged weapon light that offers both IR and white light capabilities.
What is the Unity Tactical TAPS Pressure Switch?
"TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the user’s choosing. Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package."
- UNITY TACTICAL
The Unity Tactical Augmented Pressure Switch serves as a control system for weapon-mounted electronics. Allowing you easily manipulate such devices on the control system rather than reaching over and manipulating the units themselves.
NOTE
As a result of the limitation with the current set of mod tools (as in, we have no official modding SDK) the additional attachments (flashlight on PEQ, PEQ on flashlight) are COSMETIC. However there will be plans in the future for functionality.
The flashlight attachment in this game is typically on the left side of the rail and makes the most sense (without a pressure pad) because you have quick access to turning on your flashlight with your thumb. The LA-5 replacement model was designed to fit guns that have flashlights on the left side of the rail. The same M600V flashlight model is used for both the left and right rail side, the right-mounted rail flashlight is basically reversed. so any gun using the flashlight on the right side of the rail will have a reversed LA5 model instead making those attachments unusable on those guns. The only fix would be for VOID to have all flashlight attachments mounted on the left side of the rail.
At the moment this is NO fix for this, and is why I included both 2 editions (only flashlight/only PEQ)
DISCLAIMER: The CLONE CORRECT name is ironic and not meant to be taken seriously.
_________________________________________________________
INSTALLATION
1. Drag both PEQ and Flashlight replacements (or only one) .pak into your Ready Or Not\ReadyOrNot\Content\Paks folder.
2. Equip either the PEQ15 or M600V attachment in-game.
KNOWN ISSUES
- Issue with half of the guns listed in NOTE
- MLOK rail attachment texture is messed up (fixed in next release)
RECOMMENDED: https://www.nexusmods.com/readyornot/mods/992
Thank you for your continued support for the Clone Correct Mod Series.
More content will be coming in the future.
_____________________________________________________________________
LA-5 + Surefire M600V + Unity TAPS Pressure Switch
The LA-5 + Surefire M600V + Unity TAPS Pressure Switch combo has finally arrived.
Welcome to the second entry in the Clone Correct Series. A series of mods for Ready or Not seeking to faithfully and accurately recreate gear and setups used
by real-world special mission units.
No Compromises.
The difference between this and every other gear mod is Clone Correct focuses on every single piece of gear to be accurate,
or “Clone Correct” to a real-life reference photo. Every single piece of gear down to the mag pouches are gear used and issued by the units
being portrayed.
This culminated in a mod that is striving for quality, authenticity, and getting it done right.
Welcome to Clone Correct.
The third release in this mod-series is another small release but widely anticipated one, meant to be a replacement for both the vanilla
M600V flashlight and PEQ15 to a LA-5 + Surefire M600V + Unity TAPS Pressure Switch.
What is the LA-5?
"The L-3Harris LA-5B/PEQ is the high power variant of the standard issue AN/PEQ-15 (ATPIAL) Advanced Target/Pointer Illuminator Aiming Laser. It is a compact, self-contained laser aiming system that features three functions: Visible Aiming Laser, Infrared Aiming Laser, Infrared Illuminator. The battle-proven LA-5B/PEQ is a weapon-mounted system that easily attaches to any M1913 Picatinny Rail with a standard rail grabber mount. The The co-aligned infrared and visible aiming lasers are easily adjustable; making for a simple zero procedure (zero one, and the other moves with it). Utilizing the same basic footprint as the AN/PEQ-15 the LA-5B/PEQ is one of the most versatile, lightweight, and compact aiming lasers available."
- L3HARRIS
The LA-5 is a more high-powered variant of the normal PEQ15 in-game. The LA-5's visible laser is much easier to see in sunlight and it's IR illuminator reaches further than its standard PEQ15 model.
What is the Surefire M600V?
"The M600V Scout Light® is the gold standard dual-cell in rifle-mounted WeaponLights. Powered by two 123A lithium batteries, it produces 350 lumens of white light and 120 mW of IR output, and you can select the appropriate spectrum for the situation at hand by simply rotating the bezel. SureFire’s proprietary TIR lens delivers a far-reaching, high-intensity beam with ample surround light. The rugged M600V easily and securely attaches to MIL-STD-1913 Picatinny rails via its integral thumbscrew clamp and is activated by clicking its push-button tailcap switch. Constructed of lightweight aerospace aluminum with a Mil-Spec hard-anodized finish, and O-ring sealed to keep out the elements, the tough M600V will endure combat-like conditions without any sacrifice in weapon maneuverability."
- SUREFIRE
A very common and rugged weapon light that offers both IR and white light capabilities.
What is the Unity Tactical TAPS Pressure Switch?
"TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the user’s choosing. Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package."
- UNITY TACTICAL
The Unity Tactical Augmented Pressure Switch serves as a control system for weapon-mounted electronics. Allowing you easily manipulate such devices on the control system rather than reaching over and manipulating the units themselves.
NOTE
As a result of the limitation with the current set of mod tools (as in, we have no official modding SDK) the additional attachments (flashlight on PEQ, PEQ on flashlight) are COSMETIC. However there will be plans in the future for functionality.
The flashlight attachment in this game is typically on the left side of the rail and makes the most sense (without a pressure pad) because you have quick access to turning on your flashlight with your thumb. The LA-5 replacement model was designed to fit guns that have flashlights on the left side of the rail. The same M600V flashlight model is used for both the left and right rail side, the right-mounted rail flashlight is basically reversed. so any gun using the flashlight on the right side of the rail will have a reversed LA5 model instead making those attachments unusable on those guns. The only fix would be for VOID to have all flashlight attachments mounted on the left side of the rail.
At the moment this is NO fix for this, and is why I included both 2 editions (only flashlight/only PEQ)
DISCLAIMER: The CLONE CORRECT name is ironic and not meant to be taken seriously.
_________________________________________________________
INSTALLATION
1. Drag both PEQ and Flashlight replacements (or only one) .pak into your Ready Or Not\ReadyOrNot\Content\Paks folder.
2. Equip either the PEQ15 or M600V attachment in-game.
KNOWN ISSUES
- Issue with half of the guns listed in NOTE
- MLOK rail attachment texture is messed up (fixed in next release)
RECOMMENDED: https://www.nexusmods.com/readyornot/mods/992
Thank you for your continued support for the Clone Correct Mod Series.
More content will be coming in the future.