Give Feedback
0 of 0
About this mod
OUTDATED, SEE BELOW! Since PCBS version 0.8.2.0 RAM can not be installed if there is a RAM stick already installed that it does not match with (frequency, speed, size, manufacturer). It will simply say that it is incompatible.
This mod rectifies this change so different RAM sticks can be mixed again.
- Permissions and credits
I will not be maintaining or giving support for my PC Building Simulator mods any longer due to loss of interest!
The sources for my mods can be found here (unitypatcher/hexpatcher mods) and here (modloader/harmony mods).
Feel free to do whatever you want with them!
Some of my mods may still work but as the game changes more of them will break. Even if this particular mod still works, don't count on it to stay that way when game updates come.
Fully compatible with my customer stats mod, just make sure you use this patch AFTER installing the customer stats mod or any other mods that fully replace the Assembly-CSharp-firstpass.dll.
My personal opinion on the new RAM compatibility feature introduced with PCBS 0.8.2.0:
I thought it strange that you suddenly could not mix different RAM sticks at all anymore, so I decided to restore the old behavior. I would understand a warning about mixing different stick together since it can have a negative impact on performance and depending on the board it might also give other issues, but in my own experience it works in 99% of all cases so the possibility should still be there to mix them.
I hang out on the inofficial discord for PC Building Simulator at times, so if you want to contact me or just discuss PCBS modding check there!
The sources for my mods can be found here (unitypatcher/hexpatcher mods) and here (modloader/harmony mods).
Feel free to do whatever you want with them!
Some of my mods may still work but as the game changes more of them will break. Even if this particular mod still works, don't count on it to stay that way when game updates come.
Fully compatible with my customer stats mod, just make sure you use this patch AFTER installing the customer stats mod or any other mods that fully replace the Assembly-CSharp-firstpass.dll.
My personal opinion on the new RAM compatibility feature introduced with PCBS 0.8.2.0:
I thought it strange that you suddenly could not mix different RAM sticks at all anymore, so I decided to restore the old behavior. I would understand a warning about mixing different stick together since it can have a negative impact on performance and depending on the board it might also give other issues, but in my own experience it works in 99% of all cases so the possibility should still be there to mix them.
I hang out on the inofficial discord for PC Building Simulator at times, so if you want to contact me or just discuss PCBS modding check there!