Give Feedback
0 of 0
About this mod
With this mod you can configure the amount of troops lost when trying to break in and out to defend from an enemy siege.
- Requirements
- Permissions and credits
- Changelogs
With this mod you can configure the amount of troops lost when trying to break in and out to defend from an enemy siege.
Which was WAY too high in my opinion.
INSTALLATION:
1. Place the BreakIn folder in your Modules folder
2. Tick the box BreakIn in the Bannerlord Launcher
3. Endorse the mod
4. Enjoy defensive sieges!
Now with configurable settings!
CONFIG INSTRUCTIONS:
MODLIB:
Go to ModOptions in the Bannerlord Main screen.
Click BreakIn.
Set the desired configurations.
Same calculations are used for troops lost as shown below.
XML CONFIG:
Open file Modules > BreakIn > bin > Win64_Shipping_Client > breakin.xml with an text editor (Notepad++ is recommended)
Only use true or false when enabling or disabling settings
Enter the Percentage of troops that you want to lose.
0% = No troops lost, 50 = 50% of the default value of troops lost
Example: I have 120 troops, Default value of troops lost is around 50%(Depends on tactic skill)
When i enter 20 in here the total amount of troops lost is 20% off the 50% from the default value
So with settings on 20% i will lose 12 men. (50% of 120 = 60 20% of 60 = 12)
Use true or false when enabling or disabling Breaking in or Breaking out. (Use lower case true or false)
Default is 0 so if you want to lose 0 troops don't change the config.
IF YOUR GAME CRASHES ON STARTUP:
Download : https://www.nexusmods.com/mountandblade2bannerlord/mods/265
Click on the Sort button this should put all the mods in the correct load order.
(This is how the mod was tested with about 30ish other mods)
If you have a lot of mods that use Harmony to inject code into the game it might cause issues so make sure this mod is loaded in as last.
The mod uses Harmony to inject code into the game which is not good on itself but the current MB Bannerlord code is currently developed in a way that this is hard to do otherwise.
Which was WAY too high in my opinion.
INSTALLATION:
1. Place the BreakIn folder in your Modules folder
2. Tick the box BreakIn in the Bannerlord Launcher
3. Endorse the mod
4. Enjoy defensive sieges!
Now with configurable settings!
CONFIG INSTRUCTIONS:
MODLIB:
Go to ModOptions in the Bannerlord Main screen.
Click BreakIn.
Set the desired configurations.
Same calculations are used for troops lost as shown below.
XML CONFIG:
Open file Modules > BreakIn > bin > Win64_Shipping_Client > breakin.xml with an text editor (Notepad++ is recommended)
Only use true or false when enabling or disabling settings
Enter the Percentage of troops that you want to lose.
0% = No troops lost, 50 = 50% of the default value of troops lost
Example: I have 120 troops, Default value of troops lost is around 50%(Depends on tactic skill)
When i enter 20 in here the total amount of troops lost is 20% off the 50% from the default value
So with settings on 20% i will lose 12 men. (50% of 120 = 60 20% of 60 = 12)
Use true or false when enabling or disabling Breaking in or Breaking out. (Use lower case true or false)
Default is 0 so if you want to lose 0 troops don't change the config.
IF YOUR GAME CRASHES ON STARTUP:
Download : https://www.nexusmods.com/mountandblade2bannerlord/mods/265
Click on the Sort button this should put all the mods in the correct load order.
(This is how the mod was tested with about 30ish other mods)
If you have a lot of mods that use Harmony to inject code into the game it might cause issues so make sure this mod is loaded in as last.
The mod uses Harmony to inject code into the game which is not good on itself but the current MB Bannerlord code is currently developed in a way that this is hard to do otherwise.