0 of 0
About this mod
increase dodge just avoid frame from 5 to 20 (30 frames a second.). 增加所有角色的精闪判定，从5帧到20帧（30帧为1秒）。
- Permissions and credits
Increase dodge just avoid frame from 5 to 20 (30 frames per second.).
Instructions:
Please follow this guide to install Reloaded II Mod Manager and GBFrelink Utility Manager (MAKE SURE YOUR VERSION IS 1.0.6 OR ABOVE)
Just put this mod into the Reloaded II Mod Manager and tick it.
If you're not happy with the framerate, you can download the conversion tool directly from this site ArthurHeitmann/nier_cli. Drag the playermoveparameter.msg from the folder directly into the exe in the tool folder (or just right click and select open mode and find this exe as well) and it will become a json file. Use notepad to open the json file, find the line justAvoidFrame_, change the parameters behind it (initial 5). After modification and saving, directly drag the json file into the tool exe (open the way to find the exe is fine), it will be re-packaged into a msg file. Note that if the current mod is already in effect, you need to uncheck the mod first, start the game, then exit the game, re-check the mod, and then start the game again, which is equivalent to refreshing once again.
------------------------------------------------------------------------------------------------------------------------------------------------
增加所有角色的精闪判定，从5帧到20帧（30帧为1秒）。
使用方法：
根据这个指引 this guide 去安装 Reloaded II Mod Manager 和 GBFrelink Utility Manager (确保它的版本是在1.0.6或者以上)
将此mod放入 Reloaded II Mod Manager里并勾选即可。
如果你对这个帧数不满意，可以直接在这个网站ArthurHeitmann/nier_cli下载转换工具。直接把文件夹里的playermoveparameter.msg拖入到工具文件夹里的exe里（或者直接右键选择打开方式，找到这个exe也行），就会变成json文件。用记事本打开该json文件，找到justAvoidFrame_这一行，修改后面的参数即可（初始为5）。修改完保存后，直接再把json文件拖入工具exe（打开方式找到exe也行），就会重新封包成msg文件了。注意如果当前该mod已经生效，需要先把mod取消勾选，启动游戏后，再退出游戏，重新勾选该mod，再启动游戏即可，相当于刷新了一遍。
Instructions:
Please follow this guide to install Reloaded II Mod Manager and GBFrelink Utility Manager (MAKE SURE YOUR VERSION IS 1.0.6 OR ABOVE)
Just put this mod into the Reloaded II Mod Manager and tick it.
If you're not happy with the framerate, you can download the conversion tool directly from this site ArthurHeitmann/nier_cli. Drag the playermoveparameter.msg from the folder directly into the exe in the tool folder (or just right click and select open mode and find this exe as well) and it will become a json file. Use notepad to open the json file, find the line justAvoidFrame_, change the parameters behind it (initial 5). After modification and saving, directly drag the json file into the tool exe (open the way to find the exe is fine), it will be re-packaged into a msg file. Note that if the current mod is already in effect, you need to uncheck the mod first, start the game, then exit the game, re-check the mod, and then start the game again, which is equivalent to refreshing once again.
------------------------------------------------------------------------------------------------------------------------------------------------
增加所有角色的精闪判定，从5帧到20帧（30帧为1秒）。
使用方法：
根据这个指引 this guide 去安装 Reloaded II Mod Manager 和 GBFrelink Utility Manager (确保它的版本是在1.0.6或者以上)
将此mod放入 Reloaded II Mod Manager里并勾选即可。
如果你对这个帧数不满意，可以直接在这个网站ArthurHeitmann/nier_cli下载转换工具。直接把文件夹里的playermoveparameter.msg拖入到工具文件夹里的exe里（或者直接右键选择打开方式，找到这个exe也行），就会变成json文件。用记事本打开该json文件，找到justAvoidFrame_这一行，修改后面的参数即可（初始为5）。修改完保存后，直接再把json文件拖入工具exe（打开方式找到exe也行），就会重新封包成msg文件了。注意如果当前该mod已经生效，需要先把mod取消勾选，启动游戏后，再退出游戏，重新勾选该mod，再启动游戏即可，相当于刷新了一遍。