Give Feedback
0 of 0
About this mod
Adds in a remesh model of the T-51 to resemble its version from Fallout 3 and New Vegas while retaining the same designs presented in Fallout 4. This armor is for both Male and Femal characters like the classic. This is only for the vanilla body. I want to remind that this is heavy armor not power armor. This does not have a pa frame.
- Permissions and credits
Hello everyone and welcome to Part 2!
As for my next runner up its going to be the T-51. I had noticed a few of the comments asking if this will come out. Keep in mind I do not like spoiling my content unless it is released. But I will give out hints as to what I am doing next. Besides that, let's get into the lore :)
Lore: After the creation of the T-45 power armor it has served well for many United States soldiers and has become very popular among the military. It was then two prototypes were created. The third is the T-51 which served a lot better than the T-45 by giving the soldier slightly more absorption from damage and energy and a slight buff to radiation. Energy cells were still used for the prototypes even when the fusion cores were made still serving to be its powerhouse. It was during the Battle of Anchorage that this suit was used alongside the newly created T-51 Power armor. This suit was given to specific ranking members that would lead into an assault and act as a combination of both assault and heavy being able to wield a light machine and was able to wield a minigun. It was after the battle the prototypes were less used and T-51 Power Armors were used instead. It was until the great war that these prototypes were lost in various military facilities. It was Until Roger Maxon and his newly created brotherhood of steel found these prototypes. It was then that this armor would be kept under their surveillance to prevent any further outsider from stealing powerful equipment. As the years passed many of these prototypes were passed down to various members who were well renowned for their loyalty to the Brotherhood. However, when the brotherhood spilt and became two different sects the prototypes were divided evenly among the two. Eventually though many battles one of the prototypes would be passed down to Paladin Brandis to oversee. After a battle and destroying many of his T-60 power amor, he clings onto the prototype as he fled to Recon Bunker Theta. It is there that the prototype has laid hidden away under Brandis's watch. Will you take the T-51Prototype for yourself or give it to a companion who has earned your trust? The choice is yours.
Like my other mod and my many planned parts these will not be upgradeable meaning no lining or ballistic weave sorely because they were never upgradeable in Fallout 3 or New Vegas.
I also strongly recommend using a pip-pad but may also use a pip-boy unless it clips.\
There is also clipping with this mod as well unfortunately. I did try my best to fix a few areas, but you will have to live with it.
I also do not know how this will react with other mods, but this is all from the vanilla so it may or may not.
As a reminder this is for the vanilla body only. Someone through my permission may make patch for cbbe or any other body mods.
Update #2: Adjusted the T-51 Mesh, Added New Textures from Furby's Custom Brotherhood Uniform and niceguyhenry's Vintage T-51 plus his materials, Fixed Chest and Pauldron Bone Weights
Past Fixes: Fixed the chest piece mesh where the back was opening.
Slightly made a few adjustments to the pauldrons.
The paths are now fixed which should prevent the armor from becoming invisible.
Changed the in-game name T-51C Power Armor/Helmet to T-51 Prototype Armor/Helmet
Credits: Bethesda Softworks for their Textures, Models, and Materials
Hanaisse for helping me with copying over bone weights and its many technicalities.
Ragnarr1313 for helping me fix the path files Issue.
Furby for their Bos uniform 2k textures Furby's Custom Brotherhood Uniform at Fallout 4 Nexus - Mods and community (nexusmods.com)
niceguyhenry for his Vintage T-51 textures and materials Classic Fallout 1 T51B Paint and Hood at Fallout 4 Nexus - Mods and community (nexusmods.com)
As for my next runner up its going to be the T-51. I had noticed a few of the comments asking if this will come out. Keep in mind I do not like spoiling my content unless it is released. But I will give out hints as to what I am doing next. Besides that, let's get into the lore :)
Lore: After the creation of the T-45 power armor it has served well for many United States soldiers and has become very popular among the military. It was then two prototypes were created. The third is the T-51 which served a lot better than the T-45 by giving the soldier slightly more absorption from damage and energy and a slight buff to radiation. Energy cells were still used for the prototypes even when the fusion cores were made still serving to be its powerhouse. It was during the Battle of Anchorage that this suit was used alongside the newly created T-51 Power armor. This suit was given to specific ranking members that would lead into an assault and act as a combination of both assault and heavy being able to wield a light machine and was able to wield a minigun. It was after the battle the prototypes were less used and T-51 Power Armors were used instead. It was until the great war that these prototypes were lost in various military facilities. It was Until Roger Maxon and his newly created brotherhood of steel found these prototypes. It was then that this armor would be kept under their surveillance to prevent any further outsider from stealing powerful equipment. As the years passed many of these prototypes were passed down to various members who were well renowned for their loyalty to the Brotherhood. However, when the brotherhood spilt and became two different sects the prototypes were divided evenly among the two. Eventually though many battles one of the prototypes would be passed down to Paladin Brandis to oversee. After a battle and destroying many of his T-60 power amor, he clings onto the prototype as he fled to Recon Bunker Theta. It is there that the prototype has laid hidden away under Brandis's watch. Will you take the T-51Prototype for yourself or give it to a companion who has earned your trust? The choice is yours.
Like my other mod and my many planned parts these will not be upgradeable meaning no lining or ballistic weave sorely because they were never upgradeable in Fallout 3 or New Vegas.
I also strongly recommend using a pip-pad but may also use a pip-boy unless it clips.\
There is also clipping with this mod as well unfortunately. I did try my best to fix a few areas, but you will have to live with it.
I also do not know how this will react with other mods, but this is all from the vanilla so it may or may not.
As a reminder this is for the vanilla body only. Someone through my permission may make patch for cbbe or any other body mods.
Update #2: Adjusted the T-51 Mesh, Added New Textures from Furby's Custom Brotherhood Uniform and niceguyhenry's Vintage T-51 plus his materials, Fixed Chest and Pauldron Bone Weights
Past Fixes: Fixed the chest piece mesh where the back was opening.
Slightly made a few adjustments to the pauldrons.
The paths are now fixed which should prevent the armor from becoming invisible.
Changed the in-game name T-51C Power Armor/Helmet to T-51 Prototype Armor/Helmet
Credits: Bethesda Softworks for their Textures, Models, and Materials
Hanaisse for helping me with copying over bone weights and its many technicalities.
Ragnarr1313 for helping me fix the path files Issue.
Furby for their Bos uniform 2k textures Furby's Custom Brotherhood Uniform at Fallout 4 Nexus - Mods and community (nexusmods.com)
niceguyhenry for his Vintage T-51 textures and materials Classic Fallout 1 T51B Paint and Hood at Fallout 4 Nexus - Mods and community (nexusmods.com)