Give Feedback
0 of 0
About this mod
Totally transformed Kingsport Lighthouse into a clean, modern(ish) settlement with 7 stores, 6 residential buildings, 3 entrances, 2 safe beaches and a large 2 storey main building , The area itself has been thoroughly cleaned and walled in to match the lighthouse.
- Requirements
- Permissions and credits
I revisited Kingsport Lighthouse and decided to completely rebuild the settlement, keeping only the lighthouse. I installed
Clean and Simple - Kingsport Lighthouse Startup by Jenncave, deleted the main wooden building and then
set about building a settlement surrounding the lighthouse.
The outer buildings
The Main Building
This is a TRANSFER SETTLEMENT BLUEPRINT, so you need to have Transfer Settlements by CDante installed and working.
Created using Transfer Settlements 1.57
What you need to do:
You should have F4SE, HUDFramework, and Transfer Settlements installed.
The requirement list is very short as I have tried to minimise the amount of mods to download.
What do you get? (see pictures)
Kingsport Settlement 2
I hope you enjoy this settlement as much as I do. If you prefer keeping the wooden building you can download my Kingsport Settlement Blueprint
Huge thank you to Jenncave and all the Nexus modders for their fantastic mods.
Clean and Simple - Kingsport Lighthouse Startup by Jenncave, deleted the main wooden building and then
set about building a settlement surrounding the lighthouse.
The outer buildings
- The ground floor is designed as a retail area 7 stores and 2 beach areas .
(I have built the stores but left them empty foryou to decorate as you
please) - The first floor was designed as a residential area with a balcony linking the whole of the first floor. (Again this is left empty
for your creative genius) - There is a large roof area which can be added to or built upon (Only contains Turretts)
The Main Building
- The ground floor is designed as a gym/workout area with a swimming pool and shower area. (I have built the
pool but left the ground floor empty for you to decorate as you please) - The first floor was designed as a bar with a balcony over looking the pool
area. (Again this is left empty for your creative genius) - There is a large roof area which can be added to or built upon.
- Bridged walkways linking outer buildings to Main building.
This is a TRANSFER SETTLEMENT BLUEPRINT, so you need to have Transfer Settlements by CDante installed and working.
Created using Transfer Settlements 1.57
What you need to do:
You should have F4SE, HUDFramework, and Transfer Settlements installed.
- Download and install Clean and Simple - Kingsport Lighthouse Startup by Jenncave following install instructions.
- In build mode select and scrap all of the Main wooden building (Do not use 'Scrapall' console command)
- Download Kingsport Settlement 2 and unzip to C:\Program Files(x86)/Steam/steamapps/common/Fallout4/data/f4se/Plugins/TransferSettlements/blueprints/
(Paste .json file to empty slot) - Download and install required mods (See Requirements drop down list)
- Import Blueprint from slot you selected and follow blueprint instructions.
The requirement list is very short as I have tried to minimise the amount of mods to download.
What do you get? (see pictures)
Kingsport Settlement 2
- Walled in Settlement.
- 6 residential buildings.
- 7 stores
- 2 Safe beaches (1 right next to a store for possible outdoor dining)
- 3 Entrances/Exits
- 3 Staircases to 1st floor
- Balcony linking the entitire first floor and main building
- Original lighthouse
- Large 2 storey main building with bridged walkways.
I hope you enjoy this settlement as much as I do. If you prefer keeping the wooden building you can download my Kingsport Settlement Blueprint
Huge thank you to Jenncave and all the Nexus modders for their fantastic mods.