When I use the Looks Menu and press B to start modifying the body, nothing happens, then when I exit Looks Menu I see a popup message 'You don't have anything assigned to that key'
If I disable FO4 Hotkeys in Vortex Mod Manager and restart FO4, the Looks Menu works as expected I can press B and the body morphing feature is active.
Is there a solution other than to exit the game, disable FO4 Hotkeys, restart the game, use Looks Menu then exit the game, re-enable FO4 Hotkeys and restart the game?
Sorry if this question is already answered and if so please provide a link
Thank you for an awesome mod any help you can offer
I guessed that the key assignment in the Hotkeys.ini file is the likely cause but did not know if I could change it without some unexpected effect on the FO4 Hotkeys mod.
So I decided to just remove the line "B=hot 3" and that solved the problem, now with FO4 Hotkeys enabled, there is no problem with Looks Menu, when I press B, the body morphing feature starts as expected.
But clicking mouse5 doesn't do anything, I've exited and re-entered the game but nothing seems to work, and since I can't find a discord or anything or even a tutorial that allows me to understand what I'm doing wrong, I hope someone can tell me what I'm doing wrong here? (I have F4SE otherwise my other 100 mods wouldn't work)
The mod simply doesn't work for me. I haven't touch the hotkeys.ini file, but I figure out the default that Z is assigned to slot 1. Then I assigned an item to slot 1, works no problem. Then I pushed the Z key, nothing happen. Another oddities is that in the MCM it said no registered hotkeys. Anyone?
The MCM refernce refers to hotkeys that are specifically mapped in other F4Script Externder mods using the MCM - so it is unrelated.
The mod works well - using in a game in 2020, with 200 mods. Take a look at the hotkeys ini file to check.
note: there are two ways to use it. 1- the ingame hotkey mapper. it works well. pick an item, assign it a slot. the hotkeys ini describes which key is which slot. for example F1 can be hotslot1.
2 - Edit hotkeys ini yourself. For example, my shift f1 summons codsworth Shift-F1=prid 0001ca7d; moveto player
or my F8 activates a stealthboy; F8=player.equipitem 0004f4a6
I use both the ingame hotkey manager for simple stuff, or I edit the hotkeys ini file directly for more advanced stuff. Check out the resources in the articles section.
I installed this using Vortex. It shows up in my inventory and I am able to assign items to the hot key in game with no issue. However when I press those hotkeys, nothing actually happens.
I'm having similar issues to the OP, but your pointers are certainly my first step in the right direction, thank you Dave!
Nothing actually shows for me under the mod config>Fo4Hotkeys section, just a blank page, but I'm still messing around in MO2 trying to figure out if the .ini is being loaded correctly, if at all. Hadn't messed messed with this many mods since Oblivion, let's see xD
I found no comment on the forum about a solution to this issue, so here we go:
For those experiencing the issue that the Hotkey Manager item did not show up in the AID section of your inventory. (you can just skip step 1 and 2)
open the console and use the following command help manager 4
Find the item named Hotkey Manager in the ALCH section of the printed list
use the following command to add the item to the player player.additem 7000080D
Hope it works for anyone having trouble! Mod works like a charm otherwise! Please also check out the Article section if you want to know more about how to setup some neat actions.
So, I'm using this with Outfit Switcher, and it works just fine. However, it appears to have disabled two keys I'm using elsewhere for different mods. F2, and F3. Originally, they were set for TM, and TFC, I managed to remove that part, from the ini file, since I have that managed by another mod. Also, I wanted to use these keys for other purposes.
Is there away for me disable these two keys? I've been using these two keys for saving. One was setup for Normal Saving, and the other was setup to Autosave. (I'm using Survival Options to achieve this.) It doesn't seem to matter whether or not I have Survival Options above, or below 4OHotkeys, it still stays disabled. I have reassigned these keys for now, but I'd prefer to put them back where they were.
I started having the problem when you select the Hotkey Manager in your AID, it just disappears and does not bring up the menu. I see a few other having this issue and didn't see a fix.
I peeked in the script and setup a hotkey to launch it with: cqf hotkeys handleopenmanager Hope this helps.
So I do not understand the installation instructions at all. Does the Lite version need the full version to function? I downloaded and set up the Lite version for using that West-Tek Optics mod vision toggle but I go in game and try using the hotkey I set up, and the default hotkeys in the ini, but nothing happens.
I'd like to make it so the in-game "Hotkey Manager" becomes an essential Quest item so I don't accidentally drop or trade it (I know it can be re-crafted but regardless).
I've located the item in FO4edit and I can see the Quest referencing it. I've tried to play around with alias and stuff but with no success (screenshots). If anyone can give me some guidance or upload an altered .esp with the changes it'd be much appreciated.
Can someone help I does not seem to work I left everything default in the ini I assigned a item thought the hotkey manager and when I used the default keybind it does not work any advice I also tried editing the ini no use either does this need to be lower in my load order or what any help would be great thanks Edit: I'm using vortex by the way
Support (95 comments)
If I disable FO4 Hotkeys in Vortex Mod Manager and restart FO4, the Looks Menu works as expected
I can press B and the body morphing feature is active.
Is there a solution other than to exit the game, disable FO4 Hotkeys, restart the game, use Looks Menu
then exit the game, re-enable FO4 Hotkeys and restart the game?
Sorry if this question is already answered and if so please provide a link
Thank you for an awesome mod any help you can offer
if I could change it without some unexpected effect on the FO4 Hotkeys mod.
So I decided to just remove the line "B=hot 3"
and that solved the problem, now with FO4 Hotkeys enabled, there is no problem with
Looks Menu, when I press B, the body morphing feature starts as expected.
So this issue is solved
[Macros]
spd=sucsm 3
[Hotkeys]
F2=tm
F3=tfc
Mouse5=player.pa ActionMelee
But clicking mouse5 doesn't do anything, I've exited and re-entered the game but nothing seems to work, and since I can't find a discord or anything or even a tutorial that allows me to understand what I'm doing wrong, I hope someone can tell me what I'm doing wrong here? (I have F4SE otherwise my other 100 mods wouldn't work)
The mod works well - using in a game in 2020, with 200 mods.
Take a look at the hotkeys ini file to check.
note: there are two ways to use it.
1- the ingame hotkey mapper. it works well. pick an item, assign it a slot.
the hotkeys ini describes which key is which slot. for example F1 can be hotslot1.
2 - Edit hotkeys ini yourself.
For example, my shift f1 summons codsworth
Shift-F1=prid 0001ca7d; moveto player
or my F8 activates a stealthboy;
F8=player.equipitem 0004f4a6
I use both the ingame hotkey manager for simple stuff, or I edit the hotkeys ini file directly for more advanced stuff. Check out the resources in the articles section.
Nothing actually shows for me under the mod config>Fo4Hotkeys section, just a blank page, but I'm still messing around in MO2 trying to figure out if the .ini is being loaded correctly, if at all. Hadn't messed messed with this many mods since Oblivion, let's see xD
Using it for yrs now w/o problems, easy to change stuff to.
t[Macros]
hot=cqf hotkeys activate
;
wea=set gamehour to 11;fw 2b52a
;
[Hotkeys]
F1=tfc;sucsm 3
F2=tm
F3=tfc 1;sucsm 5
;p=cqf wsplus_actionmanager CloneGrabbed
;NumPad1=player.unequipitem 21b3b
;NumPad2=player.equipitem 21b3b
NumPad3=tcl
NumPad4=set gamehour to 10
NumPad5=set gamehour to 22
NumPad6=fw 0002b52a
NumPad9=showlooksmenu 14
;q=player.pa ActionMelee
;t=player.pa ActionThrow
Shift-1=hot 1
Shift-2=hot 2
Shift-3=hot 3
Shift-4=hot 4
Shift-5=hot 5
Shift-6=hot 6
Shift-7=hot 7
Shift-8=hot 8
Shift-9=hot 9
Shift-0=hot 10
;q=hot 11
;Shift-w=hot 12
;Shift-r=hot 13
;Shift-t=hot 14
;Shift-y=hot 15
;Shift-u=hot 16
;Shift-i=hot 17
;Shift-o=hot 18
;Shift-p=hot 19
;Shift-å=hot 20
;ctrl-1=hot 11
;ctrl-2=hot 12
;ctrl-3=hot 13
;ctrl-4=hot 14
;ctrl-5=hot 15
;ctrl-6=hot 16
;ctrl-7=hot 17
;ctrl-8=hot 18
;ctrl-9=hot 19
;ctrl-0=hot 20
; ---------------------------------------------------
;OBS
;The lines with a ; in front of them, don't get read.
Hope it helps
For those experiencing the issue that the Hotkey Manager item did not show up in the AID section of your inventory.
(you can just skip step 1 and 2)
help manager 4
player.additem 7000080D
Hope it works for anyone having trouble! Mod works like a charm otherwise!
Please also check out the Article section if you want to know more about how to setup some neat actions.
You can also get the item back with the console command
?cqf hotkeys giveitems
Is there away for me disable these two keys? I've been using these two keys for saving. One was setup for Normal Saving, and the other was setup to Autosave. (I'm using Survival Options to achieve this.) It doesn't seem to matter whether or not I have Survival Options above, or below 4OHotkeys, it still stays disabled. I have reassigned these keys for now, but I'd prefer to put them back where they were.
Thanks for the help, in advance!
I peeked in the script and setup a hotkey to launch it with: cqf hotkeys handleopenmanager
Hope this helps.
For weapons that have an Object Effect, FO4Hotkeys is incorrectly grabbing the ID of said Object Effect instead of the ID of the weapon itself.
This causes weapon like the Cryolator to be unable to be hotkeyed.
Hope this can be fixed.
I've located the item in FO4edit and I can see the Quest referencing it. I've tried to play around with alias and stuff but with no success (screenshots). If anyone can give me some guidance or upload an altered .esp with the changes it'd be much appreciated.
Edit: I'm using vortex by the way