Full Readme:

Requirements:
Common Oblivion Library (Cobl) for Visual Health Indication,Cobl
Source: http://www.tesnexus.com/downloads/file.php?id=21104

Recommended: Oblivion Mod Manager, Author(s): Timeslip
Source: http://timeslip.chorrol.com/
Recommended: OnHit Shader Replacement, Author: Timeslip
Source: http://www.tesnexus.com/downloads/file.php?id=7385

Description
===========
While using the Immersive Health Indication mod, I was frustrated that I could not completely customize the settings. While looking at the scripts, I found it would
be easier to write my own mod than to modify that one.
So Visual Health Indication was born.

If you get hurt, you will have pulsing, blurred vision!
This mod triggers the hitshader when you reach a certain threshold percentage of your health.

Details
=======
The non-Cobl mod adds a 2 scripts and a configuration ring.
The Cobl mod adds 2 scripts and configuration is accessed in the Cobl +[Options].

The script is defaulted to trigger 99% health with a maximum Shader effect of level 25. However, you can change these settings to anything you want within the minimum (1%, 1) and maximum (99%, 50).

To customize either setting, equip the .Visual Health Indication Configuration Ring. If you are using the Cobl version, open the inventory, select +[Options], and then
select Configure Visual Health Indication. Your changes will take effect immediately on closing the inventory menu.

This script does not change or modify your health in any way. All that it does is monitor your health and triggers the effect when certain levels are reached. Simply put, the formula takes your health loss percentage and uses that figure for the effect. If you lose 25% of your health, you get a 25% effect of whatever maximum is set. (Assuming the threshold is set to 76% or greater.)

Install
=======
This archive is distributed in what LHammonds calls OMOD-Ready format. It allows you to manually extract and install like most other mods but it also allows you to use Oblivion Mod Manager and import this archive with all the
settings pre-configured for an OMOD file. Pick which method you are going to use for installation:

Manual Installation
- = or = -
OBMM Installation

Manual Install
--------------
1. Extract this archive to any folder and then copy the esp you wish to use to Oblivion's Data folder. Copy one of the Readme files to the Data\Docs folder. You can ignore or delete the "omod conversion data" folder.
2. Start Oblivion Launcher, click Data Files, and enable the .esp file(s).

OBMM Install
------------
(Do this section once.)
1. Start Oblivion Mod Manager.
2. Click the Create button.
3. Click the Add Archive button, find and select the archive, then click Yes to import OMOD data.
4. Click the Create omod button, then click OK when it finishes.

Install the mod using OBMM
1. Start Oblivion Mod Manager.
2. Double-click the name of the mod in the right-hand side of the OBMM screen. (icon should turn blue)

BAIN Install
============
1. Copy the archive to (install folder)\Obilivion\Oblivion Mods\Bash Installers\
2. Start Wrye Bash and click on the Installers tab.
3. Right click on the Archive
4. In the Esp/Esm Filters window, check either Visual Health Indication.esp or Visual Health Indication, Cobl.esp. DO NOT CHECK BOTH! If you check the
Cobl esp and you do not have Cobl installed as well, You WILL CTD when you try to start playing.)
5. In the Pakages window, Right Click on the Archive and select install.
5. Click on the Mods tab and check the esp.
6. Rebuild your Bashed Patch.

Uninstall
=========
Pick which method you are going to use for uninstall based on how you installed it:

Manual Uninstall
- = or = -
OBMM Uninstall

Manual Uninstall
----------------
1. Start Oblivion Launcher, click Data Files, uncheck the .esp file(s).
2. Delete the files/folders associated with the mod.

Oblivion\Data\Visual Health Indication.esp or Visual Health Indication, Cobl.esp
Oblivion\Data\Visual Health Indication Readme.txt (or .rtf)

OBMM Uninstall
--------------
1. Start Oblivion Mod Manager.
2. Double-click the name of the mod in the right-hand side of the OBMM screen, click Yes. (icon should turn green)

BAIN Uninstall
==============
1. Start Wrye Bash
2. Click on the Installers tab.
3. Right click on the Archive and select Uninstall.
3. Click on the Mods tab.
4. Rebuild your Bashed Patch.

Known Issues or Bugs
====================
There will be a minor issue any mod that triggers the hitshader (Realistic Fatique for example) or that imposes penalties on health. Visual Health Indication may trigger during these events. If that happens, you may have
a momentary visual glitch, but it should correct itself on the next trigger.
Sorry, can't do anything about that, the mod IS doing what it is supposed to.

History
=======
1.0, 2009/07/30: Initial release.

Contact
=======
You can find me on the official Elder Scrolls forums as 'Aellis'. I typically do not browse the TESNexus forums.

Credits
=======
Thanks to the folks on the CS Forum and the CS Wiki.
Thanks to OblivionMasta for the Immersive Health Indication mod for the inspiration to create this mod.
Thanks to the Cobl Team for Cobl
Thanks to the OBSE Team for OBSE
Thanks to Bethesda Softworks for Oblivion.
Thanks to TESNexus.com for hosting so many Mods.
Thanks to LHammonds for the Readme Generator this file was based on.

Tools Used
==========
Oblivion Mod Manager - http://www.tesnexus.com/downloads/file.php?id=2097
Oblivion Script Extender (OBSE) - http://obse.silverlock.org/
TES Construction Set -
http://www.elderscrolls.com/downloads/updates_utilities.htm
Readme Generator - http://lhammonds.game-
host.org/obmm/tools_readme_generator1.asp
Wrye Bash - http://wrye.ufrealms.net/Wrye%20Bash.html

Licensing/Legal
===============
You can do whatever you want with this mod, all I ask in return is that you give me credit if you distribute any part of this mod.