0 of 0
About this mod
Small item for EvilViking13's builds. Seriously Joel do not look at this.
- Requirements
- Permissions and credits
Spoilers below
An alternate more DIA secret door for the bunker build. If you were familiar enough with the normal cabin the small errors would defiantly give it away. the fake wall doesnt have the missing/broken boards the full one does, and the distance from the studs is off the boards are slightly mismatched (seams hidden by the frame.
This is four separate objects:
A reskined secret door
The fake back wall
The wood frame for the wall
The inside door button
All 4 are under Building - Misc
The RFID Device is added to your inventory when placing the door. Its construction materials are factored into the door material cost. I have all the items prefaced with 007 for ease of use, but I would remove that prior to demo.
As you can see the door can only be activated with the constructable button or the RFID transponder.
I was limited by not having 3d Max/Maya which would have allowed me to make new collision boundaries. So the wall and frame have there origins set to the same point as the original cabin.
Door Position & Angles relative to cabin:
Pos X: -393.74
Pos Y: -3.41
Pos Z: -2.23
Angle Z: -1
Frame Position & Angles relative to cabin:
Pos X: -5
Pos Y: -2.5
Pos Z: -2
Angle Y: +1
Wall Position & Angles relative to cabin:
Pos X: -5.98
Pos Y: 0
Pos Z: -1.81
Angle Z: -0.5
An alternate more DIA secret door for the bunker build. If you were familiar enough with the normal cabin the small errors would defiantly give it away. the fake wall doesnt have the missing/broken boards the full one does, and the distance from the studs is off the boards are slightly mismatched (seams hidden by the frame.
This is four separate objects:
A reskined secret door
The fake back wall
The wood frame for the wall
The inside door button
All 4 are under Building - Misc
The RFID Device is added to your inventory when placing the door. Its construction materials are factored into the door material cost. I have all the items prefaced with 007 for ease of use, but I would remove that prior to demo.
As you can see the door can only be activated with the constructable button or the RFID transponder.
I was limited by not having 3d Max/Maya which would have allowed me to make new collision boundaries. So the wall and frame have there origins set to the same point as the original cabin.
Door Position & Angles relative to cabin:
Pos X: -393.74
Pos Y: -3.41
Pos Z: -2.23
Angle Z: -1
Frame Position & Angles relative to cabin:
Pos X: -5
Pos Y: -2.5
Pos Z: -2
Angle Y: +1
Wall Position & Angles relative to cabin:
Pos X: -5.98
Pos Y: 0
Pos Z: -1.81
Angle Z: -0.5