0 of 0
About this mod
Expansion adds some space at the rivershore and vice-versa, but most of all, it let's you include the whole road and use the bridge as an entry to your settlement.
- Permissions and credits
- Donations
Nordhagen usually is big enough to build a decent settlement, but some people were asking about the road and the bridge, so I decided to do this little expansion.
As shown on the pictures, it doesn't add that much space to make it "over the top" large, but it adds some opportunities - the interesting one might be the possibility to accesss the whole road leading to the bridge and therefore making the bridge the entry to your settlement !
You can also build along the bridge, placing turrets there so that those raides from Easy City Downs won't even make it across the bridge ;-)
Unfortunatly, I am not messing with meshes, so you can't build on the bridge itself, since there is no collision, but you can build as shown on one of the pictures, slightly next to the bridge, where this "red metal" piece is and going left and right of the piers, it makes for an castle-like entrance ;-)
Besides that, I just corrected the aspect e.g. vanilla-border of the area, so you are able to create a rectangle without the need for overlappings to make a seamless "wall".
Attention: It seems like that Bugthesda has made some undocumented changes to some of the settlements with update 1.6.x, so that the changes, I am providing with this mod, might not be active or resulting in smaller zones.
The changes are, that they turned the settlement into a cell of it's own AND relocated the center, being able to cope better with the events surrounding this settlement - the downside is, that it will take a lot of time to fix this and that I actually don't have enough time.
Thanks to bill8872 , I can provide you with a solution for the "shrunken build area"-issue.
Like he was stating in the bugs section: open the console and type in "resetquest patch_1_6" , without the quotes, and you should be able to use the whole area again - I have tested it with Jamaica Plains and my expansion was back in full effect !
In case that this won't work, cause the console is showing that the "reset" command is not recognized by the game, instead just use "quest patch_1_6", or "patch_1_6" without the quotes.
As shown on the pictures, it doesn't add that much space to make it "over the top" large, but it adds some opportunities - the interesting one might be the possibility to accesss the whole road leading to the bridge and therefore making the bridge the entry to your settlement !
You can also build along the bridge, placing turrets there so that those raides from Easy City Downs won't even make it across the bridge ;-)
Unfortunatly, I am not messing with meshes, so you can't build on the bridge itself, since there is no collision, but you can build as shown on one of the pictures, slightly next to the bridge, where this "red metal" piece is and going left and right of the piers, it makes for an castle-like entrance ;-)
Besides that, I just corrected the aspect e.g. vanilla-border of the area, so you are able to create a rectangle without the need for overlappings to make a seamless "wall".
Attention: It seems like that Bugthesda has made some undocumented changes to some of the settlements with update 1.6.x, so that the changes, I am providing with this mod, might not be active or resulting in smaller zones.
The changes are, that they turned the settlement into a cell of it's own AND relocated the center, being able to cope better with the events surrounding this settlement - the downside is, that it will take a lot of time to fix this and that I actually don't have enough time.
Thanks to bill8872 , I can provide you with a solution for the "shrunken build area"-issue.
Like he was stating in the bugs section: open the console and type in "resetquest patch_1_6" , without the quotes, and you should be able to use the whole area again - I have tested it with Jamaica Plains and my expansion was back in full effect !
In case that this won't work, cause the console is showing that the "reset" command is not recognized by the game, instead just use "quest patch_1_6", or "patch_1_6" without the quotes.