https://fallout-fanclub.ucoz.ru/load/fallout_4/oruzhie_dlja_fallout_4/akmproject_version_1_7_en/67-1-0-1565 here's a good AK mod(it was only uploaded on this site, not on nexus sadly)
An AKM is not an AK47 though, it's basically the same gun, but it has had some minor changes made to it to make it a different weapon. Thanks for sharing though.
@Mythos214: Please spare me from your wisdom. But xgtaprox said "ther are no really good AK mods so..", and enot67 replied with a good AKM mod. And then you jumped in correcting him about the "extremely critical mysterious differences" between AKM and AK47 like a gun expert, like you've been waiting the whole life for this opportunity just to show people how wise you are with some useful knowledge that sadly, everybody knows.
Lol wow. Sorry you really trigger me whenever I see your smart comments.
I really dont get why such a big fuss is made over the akm/ak47 designation. the AKM has no fuctional change with the prototype AK-47s its just manufacturing changes from milled to stamped receivers and rivets. its like saying a 1911A1 is not a 1911, or an m16 is not an AR-15.
Here you go for anyone who wants to know all the details :
AKM: This is a popular variant of the AK family. This was created as an improvement of the original AK-47 design. The letter M in the name "AKM" stands for Modernizirovanniy, which is the Russian word for "modernized." The AKM design was developed in the 1950s and finally was approved for full production in 1959. It fires the same 7.62x39 mm as the AK-47 for backward compatibility. However, the design was much revised and enhanced from the original AK-47 to allow it to be mass-produced. The Soviets acquired modern mass production technologies from captured German engineers (including Hugo Schmeisser, the designer of the StG-44) and used those on the AKM. Among some of its improvements: Replacement of the milled receiver with a receiver made out of stamped sheet steel. Machining is a lot slower process than using a press to stamp parts. Hence, use of stamped parts made it much faster to produce AKMs. Using rivets instead of welds on the receiver, in order to speed up production. Improvements to barrel, gas ports etc. to speed up manufacturing and enhance reliability Weight reduction of approximately 1 kg. (2.2 pounds) Retains the chrome lined barrel and chamber of the AK-47 Type-2 variant, but the barrel is pressed and pinned to the receiver, instead of the AK-47 which has a threaded barrel that is screwed into the receiver. The barrel is the first in the AK family to have a slant compensator to reduce rifle climb, when shooting in automatic mode. Gas relief ports are moved forward to the gas block, instead of the gas tube. Bolt carrier was lightened slightly. The wooden stocks were also hollowed out as well, in order to reduce more weight. Sights on an AKM are calibrated to go up to 1000 meters, whereas AK-47s are only calibrated to go up to 800 meters. Changes to the metal treatment applied. The AKM is parkerized instead of blued like the AK-47. Uses modified spring and trigger assembly for better safety. The AKM fires in automatic mode only when the bolt is fully locked. The new trigger assembly also reduces "trigger bounce" and has a hammer release delay device to delay the release of the hammer by a few microseconds in automatic firing mode. The hammer release delay mechanism is sometimes incorrectly called a "rate reducer" by some people, but it doesn't appreciably change the cyclic rate of fire. Instead it allows the bolt group to settle in the forwardmost position after returning into the battery.
18 comments
here's a good AK mod(it was only uploaded on this site, not on nexus sadly)
Lol wow. Sorry you really trigger me whenever I see your smart comments.
AKM: This is a popular variant of the AK family. This was created as an improvement of the original AK-47 design. The letter M in the name "AKM" stands for Modernizirovanniy, which is the Russian word for "modernized." The AKM design was developed in the 1950s and finally was approved for full production in 1959. It fires the same 7.62x39 mm as the AK-47 for backward compatibility. However, the design was much revised and enhanced from the original AK-47 to allow it to be mass-produced. The Soviets acquired modern mass production technologies from captured German engineers (including Hugo Schmeisser, the designer of the StG-44) and used those on the AKM. Among some of its improvements:
Replacement of the milled receiver with a receiver made out of stamped sheet steel. Machining is a lot slower process than using a press to stamp parts. Hence, use of stamped parts made it much faster to produce AKMs.
Using rivets instead of welds on the receiver, in order to speed up production.
Improvements to barrel, gas ports etc. to speed up manufacturing and enhance reliability
Weight reduction of approximately 1 kg. (2.2 pounds)
Retains the chrome lined barrel and chamber of the AK-47 Type-2 variant, but the barrel is pressed and pinned to the receiver, instead of the AK-47 which has a threaded barrel that is screwed into the receiver.
The barrel is the first in the AK family to have a slant compensator to reduce rifle climb, when shooting in automatic mode.
Gas relief ports are moved forward to the gas block, instead of the gas tube.
Bolt carrier was lightened slightly. The wooden stocks were also hollowed out as well, in order to reduce more weight.
Sights on an AKM are calibrated to go up to 1000 meters, whereas AK-47s are only calibrated to go up to 800 meters.
Changes to the metal treatment applied. The AKM is parkerized instead of blued like the AK-47.
Uses modified spring and trigger assembly for better safety. The AKM fires in automatic mode only when the bolt is fully locked. The new trigger assembly also reduces "trigger bounce" and has a hammer release delay device to delay the release of the hammer by a few microseconds in automatic firing mode. The hammer release delay mechanism is sometimes incorrectly called a "rate reducer" by some people, but it doesn't appreciably change the cyclic rate of fire. Instead it allows the bolt group to settle in the forwardmost position after returning into the battery.